Volkswagen Passat / Passat Variant (2011 year). Manual — part 36
Tools
Note
♦
The use of different types and different thicknesses of steel
requires that only the welding units (inverters) authorised by
Volkswagen AG may be used to carry out repairs properly.
♦
The welding units (inverters) and body tools authorised by
Volkswagen AG are listed in ⇒ ServiceNet, Workshop Equip‐
ment, EH catalogue, Workshop equipment, Body and paint‐
work .
Special tools and workshop equipment required
♦ Pneumatic cartridge gun -V.A.G 1761/1-
♦ Cartridge heater -V.A.G 1939 A-
♦ Double-cartridge gun -VAS 5237-
Passat 2011 ➤ , Passat Variant 2011 ➤
4. Renewing roof - Variant with panorama sliding sunroof
141
♦ Tensioning strap -T10038-
♦ Suction lifter -V.A.G 1344-
Passat 2011 ➤ , Passat Variant 2011 ➤
142
Removing
Note
♦
Apply textile adhesive tape on left and right roof members parallel to laser solder seams. This reduces
danger of damage and contamination during repairs.
♦
When separating, ensure sufficient distance of to roof member -2- is kept, to assure it is not damaged during
repairs.
♦
When making parting cuts -1-, ensure that the panels lying behind are not damaged.
– Separate original joint to front and rear roof cross members.
– Separate bonded joints to front and rear roof cross members.
– Roughly cut roof out parallel to laser solder seams.
Passat 2011 ➤ , Passat Variant 2011 ➤
4. Renewing roof - Variant with panorama sliding sunroof
143
Note
♦
Roof side member -1- must not be damaged when removing residual remains of roof -2-.
♦
Use flap or felt discs only, do not use cutting disks or rough grinding disks.
Passat 2011 ➤ , Passat Variant 2011 ➤
144
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст