Volkswagen Fox (2004 year). Manual — part 59
– Continue the exhaust gas test according to the instructions on
the screen.
– When the selection of the theoretical value of exhaust gases
is displayed, select the respective “Selection of theoretical val‐
ue of exhaust gases”, -arrow-.
♦ Select “Pre-defined value” when it is related to the first exhaust
gas test,
♦ Or, when it is necessary to perform an exhaust gas test again,
select “last vehicle”.
– Charge in the indication “Continue, ” inquire -1-.
Vehicle's data entering:
The vehicle's data entering menu will be displayed.
FOX 2004 ➤
5. Additional tasks due to country legislation
109
hicle's documentation.
♦ -1- Vehicle's manufacturer: “for example VOLKSWAGEN —
VW”
♦ -2- Type of vehicle: “for example, 1J”
♦ -3- Code number for 2: “z.B. 0603”
♦ -4- Code number for 3: “for example 358”
♦ -5- Engine identification letters “for example, AQY”
♦ -6- License plate: “for example WOB-HH 1234”
♦ -7- Vehicle identification number: “for example
WVWZZZ1JZYW123456”
– Enter in the space - 8 - the kilometers traveled “for example,
32000”.
Note
♦
With the Skip key, it is possible to call new functions.
♦
With the Skip key, it is possible to interrupt the test.
Entering nominal data for the exhaust gas test:
Note
♦
If the nominal values do not exist as barcode, they must be
entered manually.
♦
All conditions for test and data necessary for the exhaust gas
test are included on the exhaust gas test datasheet for the
respective engine.
Manually entering nominal data for the exhaust gas test:
– Follow the indications on the display during the manual data
entering.
– With “Inspection values for the exhaust gas test” on the
screen, enter successively the values displayed on the ex‐
haust gas test datasheet:
1 - Test rotation (idle speed rotation)
2 - Period of catalytic converter heating
3 - Engine temperature
4 - Increased idle speed rotation
5 - Content of CO with high idle speed rotation
6 - Lambda with high idle speed rotation
7 - Idle speed operation
8 - Select the type of probe adjustment: “Enrichment probe” or
“Broad range probe” - 1 -.
9 - Lambda probe value
– After entering all data correctly, press the “Continue” key
-arrow-.
FOX 2004 ➤
110
5. Additional tasks due to country legislation
the barcode, read the barcode in the exhaust gas test data‐
sheet with the reading pencil.
The screen displays the indication with all necessary data.
– Press the key
▸
-arrow- to continue the process.
Visual inspection:
– Follow the indications on the screen.
– Perform the visual inspections.
– If there are no problems, press the “in order” key -arrow-.
Note
When the Not OK key is pressed, a test is originated.
Here you find the indication of visual inspection with the instruc‐
tion to connect the cable to the vehicle.
– Follow the indications on the screen.
– Turn ignition off.
– Connect the adapter for old vehicles -VAS 5051/2- or rotation
number adapter -VAS 5087/- or the Diagnosis cable -VAS
5051/6A- to the vehicle.
Note
♦
In some engines, it is not possible to connect the inductive
sensor to cylinder 1.
♦
In these engines, you can use the rotation number adapter -
VAS 5087/- .
♦
In some engines, you must use the rotation number adapter -
VAS 5087/- .
– Turn the ignition on.
– Insert the exhaust gas probe in the exhaust gas exit tube.
Note
The exhaust gas test process continues if the measuring probe
is in the exhaust gas exit tube.
It automatically switches to the readiness code
Condition of the catalytic converter:
It automatically switches to the catalytic converter's heating
phase.
FOX 2004 ➤
5. Additional tasks due to country legislation
111
the necessary level.
– Keep the engine rotation on the necessary level.
The remaining time for performing the heating phase is indicated
-arrow A-.
Heating period:
It automatically switches to the engine temperature measurement
indication.
– Follow the indications on the screen.
Note
This indication appears just before the engine temperature rea‐
ches 80 degrees Celsius.
– The engine temperature must reach the necessary level.
Measurement in high idle speed rotation:
It switches automatically to the high idle speed rotation measure‐
ment indication.
– Follow the indications on the screen.
The measurement starts as soon as the engine rotation reaches
the necessary level.
Note
♦
With the key,
▸
it is possible to void the measurement, that is,
not perform the exhaust gas test.
♦
With the key,
←
the measurement values are reset and the test
can be repeated.
– Keep the engine rotation on the necessary level.
The remaining time for performing the measurement is displayed
-arrow A-.
FOX 2004 ➤
112
5. Additional tasks due to country legislation
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст