Volkswagen Fox (2004 year). Manual — part 41
pears on the digital display. Release the keys!
– Enter the code number attached to the radio card with the help
of the tuning buttons -1-. The first digit of the code number is
entered with key 1, the second digit with key 2, and so forth.
If you have entered an incorrect code number, “SAFE” will start
blinking for a few seconds on the digital display.
Note
This procedure can be repeated just once.
If an incorrect code number is entered once again, the unit will
remain inactive for approximately 1 hour.
– Leave the unit on and the ignition key in the switch for one
hour.
– After 1 hour, enter the code number again.
On “beta and gamma” radios, the fixed code is activated as fol‐
lows:
– Turn the radio on.
– The digital display will exhibit “SAFE”.
– After approximately 3 seconds “1000” will appear on display.
– Enter the code number attached to the radio card with the tun‐
ing buttons 1 to 4. The first digit of the code number is entered
with the button 1, the second digit with the button 2, and so
forth.
– Then, press the search button -1- or the manual tuner -2- for
more than 2 seconds. Release the button!
If the correct code is entered, the current frequency is displayed
after a short “adjustment phase”. During this pause, a list of the
strongest regional stations is recorded and will be available for
tuning. When the ignition key is removed, the LED in the radio's
lower left section must blink. If the LED blinks, the radio is ready
to play and the anti-theft code is activated.
On “RCD 200” radios, the fixed code is activated as follows:
– Turn the radio on
– After approximately 3 seconds “1000” will appear on display.
FOX 2004 ➤
4. Service descriptions
37
of the pre-tuning buttons 1 to 4-2-. The first digit of the code
number is entered with the key 1, the second digit with the key
2, and so forth.
If the correct code was entered, keep the button -7- or -8- pressed
for 2 seconds. When the ignition key is removed, the LED in the
radio's lower left section must blink. If the LED blinks, the radio is
ready to play and the anti-theft code is activated.
-A-number of attempts to activate the anti-theft code.
-B-anti-theft code in activation.
If you have entered an incorrect code number, “SAFE” will start
blinking for a few seconds on the digital display.
Note
This procedure can be repeated just once.
If an incorrect code number is entered once again, the unit will
remain inactive for approximately 1 hour.
– Leave the unit on and the ignition key in the switch for one
hour.
– After 1 hour, enter the code number again.
4.7
Reading radio code using Diagnosis,
measurement and information system
Authorization prerequisites for the diagnostic tester
• The vehicle diagnostic tester is connected via the Central
Partner Network (CPN) with the central database (Carport,
Fazit).
• Available access for the user of the system “GeKo” (secrecy
and component protection)
Note
♦
The radio codes can be read in the central database and can
be displayed on diagnostic tester .
♦
For radio activation the codes must be entered via radio but‐
Procedure
– Connect Diagnosis, measurement and information system
.
– Switch on ignition.
– Touch the field or button on the screen for “GUIDED FUNC‐
TIONS”.
– Confirm with
>
button.
– Select one after the other:
♦ Brand
♦ Type
♦ Model year
♦ Engine code
FOX 2004 ➤
38
4. Service descriptions
TIONS”.
– Finish code reading as follows:
– Press “GoTo” button on display.
– Press the “End” button on display.
– Press “End” button in End menu.
– Switch off ignition and separate diagnostic connections.
4.8
Wheel fastening screws - tighten to cor‐
rect torque
Special tools and workshop equipment required
♦ Torque wrench - 40 to 200 Nm (enc. 1/2") -VAG 1332-
4.8.1
Hub cap/Super hub cap
The hook for removing the hub cap/ super hub cap is in the vehicle
tool kit
4.8.2
Wheel bolts
Note
Make sure that the wheel screws are tightened in a cross pattern
with the following tightening torque:
Tightening torque: 120 Nm.
– After the works are concluded, place the hook for removing
the hub caps/super hub caps on the vehicle's tools.
FOX 2004 ➤
4. Service descriptions
39
Super hub cap assembly (if available)
– Install the super hub cap so that the tire inflation valve is posi‐
tioned in the notch -arrow-.
4.9
Battery - check terminals for proper
seating and fastening
4.9.1
Battery - check fastening
Note
Due to manufacturing reasons, different types of batteries are in‐
stalled. Specific work deviations and instructions must be ob‐
served for each battery type ⇒ Electrical equipment; Rep. Gr.
27 ; Starter, generator, battery
Visual inspection
Carry out work sequence as follows:
– Check the battery case for damage. If the case is damaged,
battery electrolyte may leak.
– Check the battery poles (Battery cable connections) for dam‐
age. If the battery poles are damaged, this will compromise
the contact with the cable connections. This may cause a fire
and there may be electrical system failures.
– Check the battery fastening -arrow- and, if necessary, tighten
the fastening screw to 25 Nm.
If the battery is not firmly fastened, the following may happen:
• The battery life may be reduced because of vibration.
• Damage to the battery case.
• Safety problems in case of collision.
4.9.2
Terminal seating
Properly seated battery terminals ensure the perfect operation of
the electrical system and a long battery life.
Special tools and workshop equipment required
FOX 2004 ➤
40
4. Service descriptions
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст