Volkswagen Fox (2004 year). Manual — part 40

Service descriptions

4.1

Clock - set

Set the clock as follows:
Set the hours (2-line display):
– With the ignition on, select the clock function, pressing the

button -arrow- for less than 2 seconds. There will be a clock

symbol beside the time.

– To activate the hour set function, keep the button -arrow-

pressed until the display starts flashing, then press the button

-arrow- quickly, the numbers will change sequentially in as‐

cending order.

New Fox
Set the minutes:
– To activate the minute set function, keep the button -arrow-

pressed until the display starts flashing, then press the button

-arrow- quickly, the numbers will change sequentially in grow‐

ing order.

– Press the button -arrow- for more than 2 seconds to go back

to partial odometer function.

FOX 2004 ➤

4. Service descriptions

33

– To set the hour, with the ignition on and without the radio in‐

formation on the display, slightly turn the button -arrow- coun‐

terclockwise. To set the minutes, turn the button -arrow-

clockwise.

– One small turn to the limit changes only one unit at a time. If

the button is turned and kept pressed, the numbers will change

sequentially in ascending order.

– To set the minutes correctly based on another clock, move the

button -arrow- until it reaches one unit before the exact minute.

At the moment the other clock reaches the full minute, turn the

button again to the right.

4.2

Maintenance interval indicator (if avail‐

able) : reset with the Vehicle Diagnosis,

Measurement and Information System

♦ with the Vehicle Diagnosis, Measurement and Information

System

4.2.1

Reset the service interval indicator

through the partial odometer return but‐

ton (vehicles 2010▸)

The service interval indicator must be
♦ reset at the delivery inspection, at every oil change service,

and at every inspection service!

Reset the indicator as follows:
– Turn the ignition off.
– Press and hold the button -arrow- next to the speedometer.

FOX 2004 ➤

34

4. Service descriptions

mately 10 seconds.

The display resumes the normal indication.

4.3

Spare wheel support stop: lubricate -

(CrossFox)

– Any grease residue (contaminated grease) must be removed

from the stop.

– Lubricate the stop inside -2- with Silicone grease -G000 405

A2-

4.4

Fire extinguisher - check the charge

4.4.1

Engine identification letters AQZ, BAH,

CFZA

Location: fastened to a support on the lower front section of the

passenger's seat
The pressure gauge indicator must be on the green range -2-,

check the indicator and pressure scale:

FOX 2004 ➤

4. Service descriptions

35

Note

♦

Check for possible oxidation and for fastening of components.

♦

The vehicle fire extinguisher is designed to be used only once,

and the expiration date is defined by law!

♦

Check the expiration date printed on the extinguisher's cylin‐

der.

♦

The inviolability seal -arrow- ensures that the fire extinguisher

has not been used.

♦

Whenever used, the extinguisher must be immediately re‐

charged.

♦

Driving vehicles with extinguishers which are out-of-date or in

poor condition of use is forbidden by law.

4.5

Power window drive - reprogram

Note

When the battery is disconnected and then reconnected, the

power window drive will not be completely operational. The win‐

dow drives must be reprogrammed before the vehicle's delivery.

The vehicle battery cannot be disconnected after reprogramming.

Carry out the following work sequence to start the power window

drive:
– Press the key until the window is fully closed, keeping it press‐

ed for a few more seconds.

– Repeat this operation for the other doors.

4.6

Radio - activate the anti-theft code

The radio equipment is supplied with a fixed code. This fixed code

is not activated in the plant.
On “alpha” radios, the fixed code is activated as follows:
The security coding of the ready-to-play radio will only be activa‐

ted when the fixed code is specified. The fixed code must be

activated as follows:
– Turn the radio on.
– The digital display will exhibit “SAFE” and the number “1000”.

FOX 2004 ➤

36

4. Service descriptions