Volkswagen Jetta / Jetta Hybrid. Manual — part 27
Carry out following work:
Install in reverse order of removal.
Specified torque for bolt -4-: 1 Nm.
2.13
Removing and installing window slot in‐
ner seal
Note
♦
Removal and installation are described only for the window
slot inner seal on the right. Removal and installation of the
window slot inner seal on the left are analogous.
♦
Pull up seal equally and without distorting or bending it.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
2. Door components
105
Carry out following work:
– Removing front door trim ⇒ General body repairs, interior;
Rep. gr. 70 ; Door trim .
– Pull seal -1- uniformly -arrows- off door flange -2-.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
106
Carry out following work:
– Push seal -1- evenly onto door flange -2- by hand, starting from
B-pillar.
– Install front door trim ⇒ General body repairs, interior; Rep.
gr. 70 ; Door trims .
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
2. Door components
107
outer seal
2.14.1
Removing
Note
♦
The core of the seal is a metal insert.
♦
If this is bent, the seal can no longer be straightened out. It will
remain “wavy”.
♦
Therefore, the seal must be pulled off and pressed on evenly,
without bending or distorting it.
♦
The removal and installation sequence is only for the window
slot outer seal on the right. Removal and installation of the
window slot outer seal on the left are analogous.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
108
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст