Volkswagen Jetta / Jetta Hybrid. Manual — part 10
1.5.1
Removing
Carry out following work:
– Support bonnet -1- and remove support rod from bonnet.
– Lever out retaining clips -3- from bonnet -1- using removal
lever -80 - 200- .
– Pull insulation -2- out of oblong holes in bonnet -1-.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
1. Bonnet
37
Carry out following work:
• When installing insulation -2-, ensure that retaining clips -3-
are fitted with the wider side facing outwards.
– Slide insulation -2- with fitting lugs into oblong holes of bonnet
-1-.
– Insert all retaining clips -3- into bonnet -1-.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
38
1 - Bonnet
❑ Removing and installing
⇒ page 33
❑ Adjusting
⇒ page 51
2 - Seal in centre
❑ Removing:
– Pull off centre seal from
bonnet.
❑ Installing:
– Press centre seal into
bonnet with clips -3-
3 - Clip
❑ Before installing, check
for damage and renew if
necessary.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
1. Bonnet
39
1.7.1
Removing
Carry out following work:
– Brace the bonnet open.
– Swing support rod -1- upwards.
– Pull support rod -1- out of rubber grommet -2-.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
40
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст