Volkswagen Jetta / Jetta Hybrid. Manual — part 9
1.3.1
Removing
dow washer system; Removing and installing spray jets for
window washer system .
– Unclip line -6- from bonnet -1-.
– Pull line -6- out of opening in bonnet -1-.
– Loosen nuts -3- on left and right hinges -2- (do not remove
completely).
Further dismantling requires the assistance of a second mechan‐
ic.
– Remove support rod -4- from bonnet.
– Now, unscrew and remove nuts -3- and lift bonnet -1- out of
hinges -2-.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
1. Bonnet
33
Carry out following work:
Installation of bonnet -1- is carried out accordingly in reverse or‐
der of removal.
Note
Install the line -6- in a curve. If line is installed twisted it will kink.
Specified torque for nuts -3-: 22 Nm
– Adjusting bonnet -1-
⇒ page 51
.
1.4
Removing and installing bonnet hinge
Note
Removal and installation is described for the right hinge only. Re‐
moval and installation of the left hinge are similar.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
34
Carry out following work:
– Removing bonnet -1-
⇒ page 33
– Removing plenum chamber cover
⇒ page 17
.
– Remove bolts -3-.
– Pull off hinge -2-.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
1. Bonnet
35
Carry out following work:
Installation of the hinge -2- is carried out in the reverse order of
removal.
Specified torque for bolts -3-: 22 Nm.
– Install plenum chamber cover
⇒ page 17
.
– Install bonnet -1-
⇒ page 33
.
Jetta 2011 ➤ , Jetta Hybrid 2013 ➤
36
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст