Kia Sedona (2008 year). Instruction — part 461
2008 ACCESSORIES & BODY, CAB
Multi-Function Switch - Sedona
MULTI-FUNCTION SWITCH
COMPONENT LOCATION
2008 Kia Sedona EX
2008 ACCESSORIES & BODY, CAB Multi-Function Switch - Sedona
2008 Kia Sedona EX
2008 ACCESSORIES & BODY, CAB Multi-Function Switch - Sedona
Microsoft
Monday, May 24, 2010 4:11:26 PM
Page 1
© 2006 Mitchell Repair Information Company, LLC.
Microsoft
Monday, May 24, 2010 4:11:29 PM
Page 1
© 2006 Mitchell Repair Information Company, LLC.
Fig. 1: Identifying Multi-Function Switch Component Locations & Terminal Identification
Courtesy of KIA MOTORS AMERICA, INC.
INSPECTION
1. Multi-function switch operates head lamps and wiper through LIN communication with BCM.
2. Check BCM input/output specification of multi-function switch using the scan tool. If the specification is
abnormal, replace the head lamp or wiper switch.
3. If diagnosis is required on the multi-function switch, select "SEDONA" and "BCM".
Fig. 2: Identifying Scan Tool Display - Body Control Module
Courtesy of KIA MOTORS AMERICA, INC.
4. Select "In panel Module".
Fig. 3: Identifying Scan Tool Display - In Panel Module
Courtesy of KIA MOTORS AMERICA, INC.
2008 Kia Sedona EX
2008 ACCESSORIES & BODY, CAB Multi-Function Switch - Sedona
Microsoft
Monday, May 24, 2010 4:11:26 PM
Page 2
© 2006 Mitchell Repair Information Company, LLC.
5. Select "Current data" and check the input/output condition of BCM.
Fig. 4: Identifying Scan Tool Display - Current Data
Courtesy of KIA MOTORS AMERICA, INC.
Fig. 5: Identifying Scan Tool Display - Auto Head Lamp
Courtesy of KIA MOTORS AMERICA, INC.
REPLACEMENT
1. Disconnect the negative (-) battery terminal.
2. Remove the steering column upper and lower shrouds (A) after removing 3 screws.
2008 Kia Sedona EX
2008 ACCESSORIES & BODY, CAB Multi-Function Switch - Sedona
Microsoft
Monday, May 24, 2010 4:11:26 PM
Page 3
© 2006 Mitchell Repair Information Company, LLC.
Fig. 6: Identifying Steering Column Upper And Lower Shrouds And Screws
Courtesy of KIA MOTORS AMERICA, INC.
3. Disconnect the light switch (A) connector and pin (B).
Fig. 7: Identifying Light Switch Connector And Pin
Courtesy of KIA MOTORS AMERICA, INC.
4. Remove the wiper switch (A) after disconnecting the connector and pin (B).
2008 Kia Sedona EX
2008 ACCESSORIES & BODY, CAB Multi-Function Switch - Sedona
Microsoft
Monday, May 24, 2010 4:11:26 PM
Page 4
© 2006 Mitchell Repair Information Company, LLC.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст