Nissan Teana J32. Instruction — part 596
EXL-354
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
REAR COMBINATION LAMP
REAR COMBINATION LAMP
Exploded View
INFOID:0000000003894373
REMOVAL
DISASSEMBLY
Removal and Installation
INFOID:0000000003894374
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1.
Remove the rear combination lamp finisher.
2.
Remove the rear combination lamp mounting bolts.
3.
Pull the rear combination lamp toward outside of the vehicle. And then remove the rear combination lamp.
4.
Disconnect the rear combination lamp connector.
INSTALLATION
Install in the reverse order of removal.
1.
Rear combination lamp
2.
Rear combination lamp finisher
JPLIA1097ZZ
1.
Back-up lamp bulb
2.
Back-up lamp bulb socket
3.
Rear turn signal lamp bulb socket
4.
Rear turn signal lamp bulb
JPLIA1098ZZ
REAR COMBINATION LAMP
EXL-355
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Replacement
INFOID:0000000003894375
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
STOP/TAIL LAMP
Replacement integral with rear combination lamp. Refer to
REAR TURN SIGNAL LAMP BULB
1.
Remove the rear combination lamp. Refer to
2.
Rotate the rear turn signal lamp bulb socket counterclockwise, and unlock it.
3.
Remove the bulb from the rear turn signal lamp bulb socket.
BACK-UP LAMP BULB
1.
Remove the rear combination lamp. Refer to
2.
Rotate the back-up lamp bulb socket counterclockwise, and unlock it.
3.
Remove the bulb from the back-up lamp bulb socket.
EXL-356
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
HIGH-MOUNTED STOP LAMP
HIGH-MOUNTED STOP LAMP
Exploded View
INFOID:0000000003894376
Removal and Installation
INFOID:0000000003894377
CAUTION:
Disconnect battery negative terminal or remove the fuse.
REMOVAL
1.
Remove the rear parcel shelf finisher. Refer to
.
2.
Remove the screw. And then disconnect the connector.
3.
Remove the high-mounted stop lamp.
INSTALLATION
Install in the reverse order of removal.
1.
High-mounted stop lamp
2.
Rear parcel shelf finisher
JPLIA1099ZZ
REAR FOG LAMP
EXL-357
< ON-VEHICLE REPAIR >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
REAR FOG LAMP
Exploded View
INFOID:0000000003894378
Removal and Installation
INFOID:0000000003894379
CAUTION:
Disconnect battery negative terminal or remove the fuse.
REMOVAL
1.
Disconnect the rear fog lamp connector.
2.
Remove the nuts. And then remove the rear fog lamp rim.
3.
Remove the screw. And then remove the rear fog lamp from the rear fog lamp rim.
INSTALLATION
Installation is the reverse order of removal.
Replacement
INFOID:0000000003894380
CAUTION:
• Disconnect the battery negative terminal or remove the fuse.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
REAR FOG LAMP BULB
1.
Turn the bulb socket (1) counterclockwise and unlock it.
2.
Remove the bulb (2) from the rear fog lamp bulb socket.
1.
Rear fog lamp
2.
Rear fog lamp bracket
3.
Rear fog lamp finisher
JPLIA1102ZZ
JPLIA1103ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст