Nissan Leaf. Instruction — part 863
LUGGAGE ROOM LAMP
INL-57
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
2. Disengage luggage room lamp fixing pawl with a remover tool
(A).
3. Disconnect harness connector, and then remove luggage room lamp.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000010122291
CAUTION:
• Disconnect the 12V battery negative terminal or remove power circuit fuse while performing the
operation to prevent electric leakage. Refer to
INL-3, "Precaution for Removing 12V Battery"
• Never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to pre-
vent damage to the bulb.
• Never touch the glass surface of the bulb with bare hands because the surface is very hot just after
the lamp is turned OFF to prevent a burns.
• Leaving the bulb removed from housing for a long period of time can deteriorate performance of the
lens and reflector (causing dirty or clouding). Always prepare a new bulb and have it on hand when
replacing the bulb.
LUGGAGE ROOM LAMP BULB
1. Remove luggage room lamp assembly. Refer to
INL-56, "Removal and Installation"
.
2. Disengage shade fixing pawls using a remover tool (A), and
then remove shade.
3. Remove the bulb.
: Pawl
JMLIA2603ZZ
: Pawl
JMLIA1700ZZ
INL-58
< REMOVAL AND INSTALLATION >
CHARGE PORT LIGHT
CHARGE PORT LIGHT
Exploded View
INFOID:0000000010122292
Removal and Installation
INFOID:0000000010122293
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation
for preventing electric leakage. Refer to
INL-3, "Precaution for Removing 12V Battery"
REMOVAL
1. Remove radiator upper grille. Refer to
DLK-165, "RADIATOR UPPER GRILLE : Removal and Installa-
2. Remove charge port cover clips (A).
1.
Charge port light
2.
Charge port cover
Clip
Pawl
Front
JMLIA3510ZZ
JMLIA3501ZZ
CHARGE PORT LIGHT
INL-59
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
3. Disconnect the harness connector (A) and harness fixing clip
(B).
4. Disengage charge port light assembly fixing portion (A), and
then push charge port light assembly, as shown (
.).
5. Pull charge port cover (1) toward vehicle front and remove
charge port light assembly (2) from between charge port cover
and charge port bracket.
INSTALLATION
Installation is in the reverse order of removal.
Replacement
INFOID:0000000010122294
CAUTION:
Replacement of a single part is not possible due to the adoption of LED. For replacement, replace
charge port light assembly as a set.
JMLIA3502ZZ
JMLIA3503ZZ
JMLIA3504ZZ
INL-60
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Bulb Specifications
INFOID:0000000010122295
*: Always check with the Parts Department for the latest parts information.
Item
Type
Wattage (W)*
Map lamp
LED
—
Room lamp
—
8
Luggage room lamp
—
5
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст