Nissan Leaf. Instruction — part 862
ROOM LAMP
INL-53
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
ROOM LAMP
Exploded View
INFOID:0000000010122286
Removal and Installation
INFOID:0000000010122287
CAUTION:
• Disconnect the 12V battery negative terminal or remove power circuit fuse while performing the
operation to prevent electric leakage. Refer to
INL-3, "Precaution for Removing 12V Battery"
• Never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to pre-
vent damage to the bulb.
• Never touch the glass surface of the bulb with bare hands because the surface is very hot just after
the lamp is turned OFF to prevent a burns.
REMOVAL
1.
Headlining
2.
Room lamp assembly
3.
Bulb
4.
Lens
: Pawl
: Metal clip
: Vehicle front
JMLIA2091ZZ
INL-54
< REMOVAL AND INSTALLATION >
ROOM LAMP
1. Apply protective tape (A) on the parts to protect it from damage.
2. Disengage lens fixing pawls with a remover tool (A), and then
remove lens.
3. Using a remover tool (A), press the metal clip (B), and then dis-
engage.
4. Pull downward and then disengage the room lamp mounting
pawls.
CAUTION:
Be careful not to disengage the pawls forcibly. Doing so
may cause damage to the headliner by pawls that are fully
engaged to the headliner.
5. Disconnect the harness connector, and then remove room lamp assembly.
INSTALLATION
Install in the reverse order of removal.
Replacement
INFOID:0000000010122288
CAUTION:
• Disconnect the 12V battery negative terminal or remove power circuit fuse while performing the
operation to prevent electric leakage. Refer to
INL-3, "Precaution for Removing 12V Battery"
• Never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to pre-
vent damage to the bulb.
• Never touch the glass surface of the bulb with bare hands because the surface is very hot just after
the lamp is turned OFF to prevent a burns.
• Leaving the bulb removed from housing for a long period of time can deteriorate performance of the
lens and reflector (causing dirty or clouding). Always prepare a new bulb and have it on hand when
replacing the bulb.
ROOM LAMP BULB
JMLIA2591ZZ
: Pawl
JMLIA2602ZZ
: Pawl
: Metal clip
JMLIA1801ZZ
ROOM LAMP
INL-55
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
INL
N
O
P
1. Apply protective tape (A) on the parts to protect it from damage.
2. Disengage lens fixing pawls with a remover tool (A), and then
remove lens.
3. Remove the bulb.
JMLIA2591ZZ
: Pawl
JMLIA2602ZZ
INL-56
< REMOVAL AND INSTALLATION >
LUGGAGE ROOM LAMP
LUGGAGE ROOM LAMP
Exploded View
INFOID:0000000010122289
Removal and Installation
INFOID:0000000010122290
CAUTION:
Disconnect the 12V battery negative terminal or remove power circuit fuse while performing the oper-
ation to prevent electric leakage. Refer to
INL-3, "Precaution for Removing 12V Battery"
.
REMOVAL
1. Apply protective tape (A) on the parts to protect it from damage.
1.
Shade
2.
Bulb
3.
Luggage room lamp assembly
4.
Luggage side lower finisher
: Pawl
: Vehicle front
JMLIA1691ZZ
JMLIA2592ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст