Nissan Pathfinder (2006 year). Instruction — part 229
REAR BUMPER
EI-15
C
D
E
F
G
H
J
K
L
M
A
B
EI
2006 Pathfinder
REAR BUMPER
PFP:H5022
Removal and Installation
EIS007TS
REMOVAL
1.
Remove LH and RH rear fascia struts.
2.
Remove rear fascia lower stay bolts.
3.
Remove fascia front upper bolts near wheel opening.
4.
Release left pinch rail clips and remove LH side of rear bumper fascia from quarter panel.
5.
Release right pinch rail clips and remove RH side of rear bumper fascia from quarter panel.
6.
Remove fascia rear upper bolts near combination lamp.
7.
Remove rear bumper fascia.
8.
Disconnect harness on left side of tow hitch.
9.
Remove rear bumper reinforcement.
10. Remove drafter duct from lower side of LH quarter panel.
INSTALLATION
Installation is in the reverse order of removal.
●
Apply sealant to clips securing upper step pad during installation.
1.
Rear valance
2.
Rear bumper reinforcement
3.
Rear bumper fascia
4.
Rear fascia strut LH/RH
5.
Step pad
6.
Clip
7.
Tow hitch
8.
Tow harness bracket
9.
Tow hitch harness
10. Rear fascia lower stay
11.
Pinch rail
12. Washer
13. Drafter duct
14. Filter element
LIIA1750E
EI-16
FRONT GRILLE
2006 Pathfinder
FRONT GRILLE
PFP:62310
Removal and Installation
EIS007TT
REMOVAL
1.
Release upper clips from front grille.
2.
Twist and release LH and RH side clips and remove front grille from member.
INSTALLATION
Installation is in the reverse order of removal.
1.
Slide clips
2.
Front grille
3.
Front emblem
4.
Clips
LIIA1760E
COWL TOP
EI-17
C
D
E
F
G
H
J
K
L
M
A
B
EI
2006 Pathfinder
COWL TOP
PFP:66100
Removal and Installation
EIS007TU
REMOVAL
1.
Remove the front wiper arms. Refer to
.
2.
Remove cowl top seal.
3.
Release clips and remove LH and RH cowl top extensions.
4.
Disconnect washer tubes from washer nozzles.
5.
Remove cowl top clips and remove cowl top from the cowl.
INSTALLATION
Installation is in the reverse order of removal.
1.
Cowl top extension RH
2.
Clips
3.
Cowl top
4.
Washer nozzle screws
5.
Grommet
6.
Cowl top seal
7.
Cowl top extension LH
LIIA1761E
EI-18
FRONT FENDER
2006 Pathfinder
FRONT FENDER
PFP:63100
Removal and Installation
EIS007TV
REMOVAL
1.
Remove headlamp assembly. Refer to
LT-27, "Removal and Installation"
2.
Remove front fender protector. Refer to
3.
Remove front bumper. Refer to
EI-14, "Removal and Installation"
.
4.
Remove front fender bolts from hoodledge and dash panel.
5.
Remove front fender bolts from rocker panel and radiator core support member.
6.
Remove front fender.
INSTALLATION
Installation is in the reverse order of removal.
LIIA1752E
LICENSE LAMP FINISHER
EI-19
C
D
E
F
G
H
J
K
L
M
A
B
EI
2006 Pathfinder
LICENSE LAMP FINISHER
PFP:84810
Removal and Installation
EIS007TW
REMOVAL
1.
Remove back door finisher. Refer to
2.
Remove nuts and license lamp finisher.
INSTALLATION
Installation is in the reverse order of removal.
1.
Back door
2.
Nut
3.
License lamp finisher
LIIA1781E
EI-20
FENDER PROTECTOR
2006 Pathfinder
FENDER PROTECTOR
PFP:63840
Components
EIS007TX
Front Fender Protector
Rear Fender Protector
WIIA1078E
1.
Fender protector LH
2.
Nut
3.
Clip C205
4.
Grommet
⇐
Vehicle front
LIIA1764E
1.
Fender protector RH
2.
Clips
3.
Nuts
4.
Fender protector LH
FENDER PROTECTOR
EI-21
C
D
E
F
G
H
J
K
L
M
A
B
EI
2006 Pathfinder
Removal and Installation of Front Fender Protector
EIS007TY
REMOVAL
1.
Remove screws.
2.
Remove plastic clips.
3.
Remove pushpins.
4.
Remove front fender protector.
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation of Rear Fender Protector
EIS007TZ
REMOVAL
1.
Remove screws.
2.
Remove plastic clips.
3.
Remove pushpins.
4.
Remove rear fender protector.
INSTALLATION
Installation is in the reverse order of removal.
EI-22
RUNNING BOARDS
2006 Pathfinder
RUNNING BOARDS
PFP:96110
Removal and Installation
EIS007U0
REMOVAL
1.
Remove mud flaps (if equipped).
2.
Remove bolts and remove running board from running board brackets.
3.
Remove nuts and remove running board brackets from chassis.
4.
Remove screw and clip and remove wind deflector.
INSTALLATION
Installation is in the reverse order of removal.
1.
Front mud flap (if equipped)
2.
Running board
3.
Rear wheel wind deflector
4.
Rear mud flap (if equipped)
5.
Running board bracket
LIIA1779E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст