Nissan Versa Note. Instruction — part 884
WIPER AND WASHER SYSTEM SYMPTOMS
WW-55
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
Symptom
Possible malfunction
Reference
Front wiper does not op-
erate in...
HI only
• Combination switch (wiper and washer
switch)
• Harness between combination switch (wip-
er and washer switch) and BCM
• BCM
Combination switch (wiper
and washer switch)
Refer to
(with Intelligent Key) or
(without Intelligent Key).
• IPDM E/R
• Harness between IPDM E/R and front wiper
motor
• Front wiper motor
Front wiper motor (HI) circuit
Refer to
.
Front wiper request signal (IPDM E/R)
Check FR WIP REQ in DATA
MONITOR of IPDM E/R. Re-
fer to
(with
(without Intelligent
Key).
LO and INT
• Combination switch (wiper and washer
switch)
• Harness between combination switch (wip-
er and washer switch) and BCM
• BCM
Combination switch (wiper
and washer switch)
Refer to
(with Intelligent Key) or
(without Intelligent Key).
• IPDM E/R
• Harness between IPDM E/R and front wiper
motor
• Front wiper motor
Front wiper motor (LO) circuit
Refer to
.
Front wiper request signal (IPDM E/R)
Check FR WIP REQ in DATA
MONITOR of IPDM E/R. Re-
fer to
(with
(without Intelligent
Key).
INT only
• Combination switch (wiper and washer
switch)
• Harness between combination switch (wip-
er and washer switch) and BCM
• BCM
Combination switch (wiper
and washer switch)
Refer to
(with Intelligent Key) or
(without Intelligent Key).
Front wiper request signal (IPDM E/R)
Check FR WIP REQ in DATA
MONITOR of IPDM E/R. Re-
fer to
(with
(without Intelligent
Key).
Any mode
—
Refer to
Front wiper does not
stop in...
Any mode
Front wiper auto stop signal (IPDM E/R)
Refer to
.
• Combination switch (wiper and washer
switch)
• BCM
Combination switch (wiper
and washer switch)
Refer to
(with Intelligent Key) or
(without Intelligent Key).
WW-56
< SYMPTOM DIAGNOSIS >
WIPER AND WASHER SYSTEM SYMPTOMS
Front wiper operates ab-
normally because...
Intermittent adjust-
ments cannot be made.
• Combination switch (wiper and washer
switch)
• Harness between combination switch (wip-
er and washer switch) and BCM
• BCM
Combination switch (wiper
and washer switch)
Refer to
(with Intelligent Key) or
(without Intelligent Key).
Wiper/washer will not
operate together.
• Combination switch (wiper and washer
switch)
• Harness between combination switch (wip-
er and washer switch) and BCM
• BCM
Combination switch (wiper
and washer switch)
Refer to
(with Intelligent Key) or
(without Intelligent Key).
Wipers will not return to
stop position (repeat-
edly operates for 10
seconds and then
stops for 20 seconds.
Wipers then stop oper-
ating).
• IPDM E/R
• Harness between IPDM E/R and front wiper
motor
• Front wiper motor
Front wiper auto stop signal
circuit
Refer to
Rear wiper does not op-
erate.
ON only
• Combination switch (wiper and washer
switch)
• Harness between combination switch (wip-
er and washer switch) and BCM
• BCM
Combination switch (wiper
and washer switch)
Refer to
(with Intelligent Key) or
(without Intelligent Key).
INT only
• Combination switch (wiper and washer
switch)
• Harness between combination switch (wip-
er and washer switch) and BCM
• BCM
Combination switch (wiper
and washer switch)
Refer to
(with Intelligent Key) or
(without Intelligent Key).
ON and INT
• Combination switch (wiper and washer
switch)
• Harness between combination switch (wip-
er and washer switch) and BCM
• BCM
Combination switch (wiper
and washer switch)
Refer to
(with Intelligent Key) or
(without Intelligent Key).
• BCM
• Harness between rear wiper motor and
BCM
• Harness between rear wiper motor and
ground
• Rear wiper motor
Rear wiper motor circuit
Refer to
Rear wiper does not
stop.
ON only
• Combination switch (wiper and washer
switch)
• BCM
Rear wiper motor circuit
Refer to
INT only
• Combination switch (wiper and washer
switch)
• BCM
Combination switch (wiper
and washer switch)
Refer to
(with Intelligent Key) or
(without Intelligent Key).
Symptom
Possible malfunction
Reference
WIPER AND WASHER SYSTEM SYMPTOMS
WW-57
< SYMPTOM DIAGNOSIS >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
Rear wiper does not op-
erate normally.
Wiper is not linked to
the washer operation.
• Combination switch (wiper and washer
switch)
• Harness between rear wiper motor and
BCM
• BCM
Combination switch (wiper
and washer switch)
Refer to
(with Intelligent Key) or
(without Intelligent Key).
BCM
—
Rear wiper does not re-
turn to the Stop position
(Stops after a five-sec-
ond operation).
• BCM
• Harness between rear wiper motor and
BCM
• Rear wiper motor
Rear wiper auto stop signal
circuit
Refer to
Rear wiper stops after
operating for five sec-
onds when ignition
switch is turned ON.
Front and rear washer
motor does not operate.
Front and rear washer
motor does not operate
when the washing
windshield.
• Combination switch (wiper and washer
switch)
• Harness between combination switch (wip-
er and washer switch) and BCM
• BCM
Combination switch (wiper
and washer switch)
Refer to
(with Intelligent Key) or
(without Intelligent Key).
• Harness between rear combination switch
(wiper and washer switch) and front and
rear washer motor.
• Front and rear washer motor
Front and rear washer motor
circuit
Refer to
Symptom
Possible malfunction
Reference
WW-58
< SYMPTOM DIAGNOSIS >
FRONT WIPER DOES NOT OPERATE
FRONT WIPER DOES NOT OPERATE
Description
INFOID:0000000009643040
The front wiper does not operate under any operation conditions.
Diagnosis Procedure
INFOID:0000000009643041
Regarding Wiring Diagram information, refer to
.
1.
CHECK WIPER RELAY OPERATION
IPDM E/R AUTO ACTIVE TEST
1. Start IPDM E/R auto active test. Refer to
PCS-10, "Diagnosis Description"
(without Intelligent Key).
2. Check that the front wiper operates on LO and HI operation.
CONSULT ACTIVE TEST
1. Select FR WIPER of BCM (WIPER) active test item.
2. Check front wiper operation.
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> GO TO 2.
2.
CHECK FRONT WIPER MOTOR FUSE
.
Is the fuse blown?
YES
>> Replace the fuse after repairing the affected circuit.
NO
>> GO TO 3.
3.
CHECK FRONT WIPER MOTOR GROUND CIRCUIT
.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace harness.
4.
CHECK FRONT WIPER MOTOR OUTPUT VOLTAGE
1. Turn the ignition switch ON.
2. With CONSULT, select FRONT WIPER of IPDM E/R ACTIVE TEST item.
3. Check voltage between IPDM E/R harness connector and ground while wipers are operating.
Is the inspection result normal?
YES
>> Replace front wiper motor. Refer to
WW-71, "Removal and Installation"
NO
>> Replace IPDM E/R. Refer to
PCS-31, "Removal and Installation"
(with Intelligent Key) or
(without Intelligent Key).
LO
: Front wiper LO operation
HI
: Front wiper HI operation
OFF
: Front wiper stop
IPDM E/R
Ground
FRONT WIPER
Voltage
(Approx.)
Connector
Terminal
E45
17
LO
Battery voltage
OFF
0 V
18
HI
Battery voltage
OFF
0 V
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст