Nissan Versa Note. Instruction — part 886
FRONT WASHER MOTOR
WW-63
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
FRONT WASHER MOTOR
Exploded View
INFOID:0000000009578791
Removal and Installation
INFOID:0000000009578792
REMOVAL
1. Remove front under cover. Refer to
EXT-37, "FRONT UNDER COVER : Removal and Installation"
.
2. Remove fender protector (RH). Refer to
EXT-36, "Removal and Installation"
3. Disconnect the harness connector from the front washer motor.
4. Remove front washer tube and rear washer tube from front washer motor.
5. Remove front washer motor from washer tank.
6. Remove front washer motor seal from washer tank.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Do not rotate or damage the front washer motor seal when installing the front washer motor.
1.
Washer tank cap
2.
Washer tank
3.
Front washer motor
A.
Front washer motor seal
B.
Washer fluid level switch (if equipped)
Front
ALLIA1317ZZ
WW-64
< REMOVAL AND INSTALLATION >
WASHER FLUID LEVEL SWITCH
WASHER FLUID LEVEL SWITCH
Removal and Installation
INFOID:0000000009578885
The washer fluid level switch is serviced as part of the washer tank. Refer to
.
FRONT WASHER NOZZLE AND TUBE
WW-65
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
K
M
A
B
WW
N
O
P
FRONT WASHER NOZZLE AND TUBE
Exploded View
INFOID:0000000009578793
WASHER NOZZLE
WASHER NOZZLE : Removal and Installation
INFOID:0000000009578795
REMOVAL
1. Remove cowl top cover. Refer to
EXT-35, "Removal and Installation"
.
2. Disconnect front washer tube from front washer nozzle (1).
3. Place cowl top cover (2) up side down and release front washer
nozzle pawl (A) using a suitable tool to remove.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installation, adjust the nozzle spray pattern. Refer to
WW-66, "WASHER NOZZLE : Adjustment"
.
1.
Front washer nozzle (RH)
2.
Front washer tube
3.
Front washer motor
4.
Washer tank
5.
Front washer nozzle (LH)
A.
To rear washer
B.
Washer pump seal
Clip
ALLIA1306ZZ
AWLIA2161ZZ
WW-66
< REMOVAL AND INSTALLATION >
FRONT WASHER NOZZLE AND TUBE
WASHER NOZZLE : Adjustment
INFOID:0000000009578796
If washer nozzle (1) spray pattern is not within specification, adjust
using a suitable tool (A).
WASHER TUBE
WASHER TUBE : Removal and Installation
INFOID:0000000009578797
REMOVAL
1. Remove fender protector (RH). Refer to
EXT-36, "Removal and Installation"
.
2. Remove front washer tube from washer pump.
3. Remove cowl top cover. Refer to
EXT-35, "Removal and Installation"
.
4. Release the clips that retain the front washer tube to the vehicle body using a suitable tool and remove.
1.
Windshield glass
2.
Black printed area line
3.
Front washer nozzle (LH/RH)
A.
Center line
B.
509.7 mm (20.07 in)
C.
215.7 mm (8.49 in)
D.
614.5 mm (24.19 in)
E.
329.1 mm (12.96 in)
F.
41.0 mm (1.61 in)
G.
379.6 mm (14.94 in)
H.
161.1 mm (6.34 in)
J.
58.6 mm (2.31 in)
K.
58.0 mm (2.28 in)
M.
142.0 mm (5.59 in)
N.
365.9 mm (14.41 in)
O.
54.7 mm (2.15 in)
P.
492.5 mm (19.39 in)
Q.
652.2 mm (25.68 in)
R.
174.3 mm (6.86 in)
S.
520.7 mm (20.50 in)
ALLIA1307ZZ
JMLIA1327ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст