Nissan Murano. Instruction — part 914
HEADLINING
INT-33
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
- BOSE AUDIO WITH NAVIGATION LHD MODELS. Refer to
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• As for guide, first install the sun-visor holder (LH and RH) and then the rear hidden clips at the back
side of headlining.
• Be careful not to bend the headlining when installing.
• When installing assist grip, install metal clip (1) to assist grip
clip (2), and then install to the vehicle body.
JMJIA3623ZZ
INT-34
< REMOVAL AND INSTALLATION >
LUGGAGE FLOOR TRIM
LUGGAGE FLOOR TRIM
Exploded View
INFOID:0000000009720376
1.
Rear plate ornament (LH/RH)
2.
Luggage rear plate
3.
Luggage rear plate cap
4.
Trunk net hook
5.
Luggage side upper finisher RH
6.
Luggage side lower finisher RH
7.
Rear rope hook
8.
Luggage floor front finisher
9.
Luggage mask
10. Tonneau cover assembly
11. Luggage side lower finisher LH
12. Seatback control lever escutcheon
LH
13. Luggage side upper finisher LH
14. Luggage floor center finisher (rear)
15. Luggage floor center finisher (front)
JMJIA2586ZZ
LUGGAGE FLOOR TRIM
INT-35
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
Removal and Installation
INFOID:0000000009720377
REMOVAL
LUGGAGE FLOOR CENTER FINISHER (FRONT) AND LUGGAGE FLOOR CENTER FINISHER (REAR)
1.
Fully open back door.
2.
Remove tonneau cover assembly.
3.
Remove the net.
4.
Remove luggage floor finisher (LH and RH).
5.
Open luggage floor center finisher (rear) (1), turn clip (A) as
shown in the figure, and then remove the luggage floor center
finisher (rear).
6.
Remove rear rope hook (1) fixing bolts (A) form the luggage floor
front finisher (2) and then remove luggage floor front finisher.
7.
Remove both of luggage floor center finisher (front) fixing bolts, and then remove the luggage floor center
finisher (front).
8.
Remove the woofer.(BOSE audio with navigation models) Refer to
AV-455, "Removal and Installation"
.
LUGGAGE SIDE UPPER FINISHER
1.
Remove rear seat belt anchor bolt (upper). Refer to
SB-13, "SEAT BELT RETRACTOR : Removal and
.
2.
Remove rear body side welt. Refer to
INT-20, "Removal and Installation"
.
3.
Remove back door weather-strip. Refer to
DLK-336, "BACK DOOR WEATHER-STRIP : Removal and
.
4.
Remove tonneau cover assembly.
5.
Remove trunk net hook.
6.
Remove luggage side upper finisher fixing bolt.
16. Belt assembly
17. Seatback control lever escutcheon
RH
18. Luggage floor finisher RH
19. Luggage floor spacer RH
20. Luggage floor spacer LH
21. Luggage floor finisher LH
22. Clamp
23. Woofer
24. Net
: Clip
: Pawl
: Metal clip
: Vehicle front
JMJIA1408ZZ
JMJIA2730ZZ
INT-36
< REMOVAL AND INSTALLATION >
LUGGAGE FLOOR TRIM
7.
Remove luggage side upper finisher clips and metal clips with remover tool.
8.
Remove luggage side upper finisher from the body side panel.
LUGGAGE SIDE LOWER FINISHER
1.
Remove rear seat belt outer anchor fixing bolts. Refer to
SB-12, "SEAT BELT RETRACTOR : Exploded
.
2.
Remove luggage rear plate.
3.
Remove the luggage side upper finisher.
4.
Disengage rear rope hook mounting bolt caps, remove rear rope
hook mounting bolts with socket wrench (A), and then remove
rope hooks (1) (LH/RH).
5.
Remove the seatback control lever escutcheon. Refer to
.
6.
Remove luggage side lower finisher fixing clip with remover tool.
7.
Pull the luggage side lower finisher (1) to disengage the clips
and metal clips, then disconnect the luggage room power socket
harness connector (A).
8.
Remove luggage side lower finisher.
LUGGAGE REAR PLATE
1.
Remove back door weather-strip. Refer to
DLK-336, "BACK DOOR WEATHER-STRIP : Removal and
.
2.
Remove luggage rear plate (1) fixing clips with remover tool.
3.
Hold both sides of luggage rear plate, pull upwards to remove.
JMJIA0617ZZ
JMJIA1398ZZ
: Clip
JMJIA1400ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст