Nissan Titan. Instruction — part 104
DOOR
DLK-125
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Striker adjustment
1. Loosen striker bolts.
2. Adjust the striker so that it becomes parallel with the lock inser-
tion direction.
3. Tighten striker bolts.
Removal and Installation
INFOID:0000000009878841
KING CAB
Front Door
CAUTION:
• Use two people when removing or installing the front door assembly due to its heavy weight.
• When removing and installing front door assembly, support front door with a suitable tool.
• Check the hinge rotating part for poor lubrication. If necessary, apply a suitable multipurpose
grease.
• When removing and installing front door assembly, be sure to carry out the fitting adjustment.
1. Remove the front door lock assembly. Refer to
DLK-128, "Removal and Installation"
.
2. Remove the door harness.
3. Remove the check link cover.
4. Remove the check link bolt from the hinge pillar.
5. Remove the door-side hinge nuts (
) and bolts, and the front
door assembly.
Installation is in the reverse order of removal.
• Align the front door. Refer to
.
Rear Door
CAUTION:
Rear door hinge nuts
: 24.5 N·m (2.5 kg-m, 18 ft-lb)
AWKIA1766ZZ
LIIA1503E
LIIA1727E
DLK-126
< REMOVAL AND INSTALLATION >
DOOR
• Use two people when removing or installing the rear door assembly due to its heavy weight.
• When removing and installing rear door assembly, support rear door with a suitable tool.
• Check the hinge rotating part for poor lubrication. If necessary, apply a suitable multipurpose
grease.
• When removing and installing rear door assembly, be sure to carry out the fitting adjustment.
1. Remove the door glass. Refer to
2. Remove the speaker.
3. Remove the door handles and latch assembly. Refer to
DLK-131, "Component Structure"
4. Remove the check link.
5. Remove the wire harness.
6. Remove the door assembly.
Installation is in the reverse order of removal.
• Align the rear door. Refer to
CREW CAB
CAUTION:
• Use two people when removing or installing the rear door assembly due to its heavy weight.
• When removing and installing rear door assembly, support rear door with a suitable tool.
• Check the hinge rotating part for poor lubrication. If necessary, apply a suitable multipurpose
grease.
• When removing and installing rear door assembly, be sure to carry out the fitting adjustment.
1. Remove the rear door lock assembly. Refer to
DLK-132, "Removal and Installation"
2. Remove the door harness.
3. Remove the check link cover.
4. Remove the check link bolt from the hinge pillar.
WIIA0334E
LIIA1503E
DOOR
DLK-127
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
5. Remove the door-side hinge nuts (
) and bolts, and the rear
door assembly.
Installation is in the reverse order of removal.
• Align the rear door. Refer to
LIIA1727E
DLK-128
< REMOVAL AND INSTALLATION >
FRONT DOOR LOCK
FRONT DOOR LOCK
Component Structure
INFOID:0000000009878842
Removal and Installation
INFOID:0000000009878843
REMOVAL
1. Remove the front door window regulator. Refer to
GW-18, "Removal and Installation"
.
2. Remove the front door window rear glass run.
3. Position aside vapor barrier.
1.
Door key cylinder assembly (Driver
side) Outside handle escutcheon
(Passenger side)
2.
Key cylinder assembly (Driver side
only)
3.
Rear gasket
4.
Outside handle bracket
5.
Grommet
6.
Key cylinder rod (Driver side only)
7.
Front door striker
8.
Door lock assembly
9.
Inside handle assembly
10. Inside door lock lever
11. Front gasket
12. Outside handle assembly
AWKIA1792GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст