Nissan Quest E52. Instruction — part 755
HAC-150
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
REFRIGERANT PRESSURE SENSOR
REFRIGERANT PRESSURE SENSOR
Exploded View
INFOID:0000000009652601
.
Removal and Installation
INFOID:0000000009652602
REMOVAL
HA-45, "REFRIGERANT PRESSURE SENSOR : Removal and Installation"
INSTALLATION
Install in the reverse order of removal.
DOOR MOTOR
HAC-151
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
DOOR MOTOR
Exploded View
INFOID:0000000009652603
Front A/C unit
Rear A/C unit
FRONT MODE DOOR MOTOR
FRONT MODE DOOR MOTOR : Removal and Installation
INFOID:0000000009652604
REMOVAL
1.
Remove instrument lower panel LH. Refer to
IP-14, "Removal and Installation"
JMIIA1855ZZ
1.
Front mode door motor
2.
Front mode door lever
3.
Link rod
4.
Main link
5.
Foot link
6.
Foot lever
7.
Front air mix door motor (Driver side) 8.
Heater & cooling unit assembly
9.
Front air mix door motor (Passenger side)
10. Blower unit assembly
11.
Intake door motor
12. Defroster lever
13. Ventilator lever
14.
Max. cool lever
15. Defroster link
16. Max. cool link
17.
Ventilator link
JMIIA1121ZZ
1.
Rear foot duct 2
2.
Rear air mix door lever
3.
Rear air mix door motor
4.
Rear A/C unit assembly
5.
Rear mode door motor
6.
Rear mode door lever
HAC-152
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
DOOR MOTOR
2.
Disconnect harness connector (A), and then remove harness
fixing clip (B).
3.
Remove fixing screws (C), and then remove front mode door
motor from heater & cooling unit assembly.
INSTALLATION
Install in the reverse order of removal.
FRONT AIR MIX DOOR MOTOR
FRONT AIR MIX DOOR MOTOR : Removal and Installation
INFOID:0000000009652605
REMOVAL
Driver Side
1.
Set the temperature at 18
°
C (64
°
F).
CAUTION:
The angle may be out, when installing the air mix door motor to the air mix door, unless the above
procedure is performed.
2.
Disconnect the battery cable from the negative terminal.
3.
Remove instrument lower cover LH. Refer to
IP-14, "Removal and Installation"
.
4.
Disconnect harness connector (A), and then remove fixing
screws (B).
5.
Remove front air mix door motor from heater & cooling unit
assembly.
Passenger Side
1.
Set the temperature at 18
°
C (64
°
F).
CAUTION:
The angle may be out, when installing the air mix door motor to the air mix door, unless the above
procedure is performed.
2.
Disconnect the battery cable from the negative terminal.
3.
Remove instrument lower cover RH. Refer to
IP-14, "Removal and Installation"
4.
Remove harness fixing clip (A), and then disconnect harness
connector (B).
5.
Remove fixing screws (C), and then remove front air mix door
motor from heater & cooling unit assembly.
: Vehicle front
JMIIA1849ZZ
: Vehicle front
JMIIA1850ZZ
: Vehicle front
JMIIA1851ZZ
DOOR MOTOR
HAC-153
< REMOVAL AND INSTALLATION >
[AUTOMATIC AIR CONDITIONING]
C
D
E
F
G
H
J
K
L
M
A
B
HAC
N
O
P
INSTALLATION
Install in the reverse order of removal.
INTAKE DOOR MOTOR
INTAKE DOOR MOTOR : Removal and Installation
INFOID:0000000009652606
REMOVAL
1.
Remove instrument lower panel RH. Refer to
IP-14, "Removal and Installation"
2.
Disconnect harness connector (A), and then remove harness
fixing clip (B).
3.
Remove fixing screws (C), and then remove intake door motor
from blower unit assembly.
INSTALLATION
Install in the reverse order of removal.
REAR MODE DOOR MOTOR
REAR MODE DOOR MOTOR : Removal and Installation
INFOID:0000000009652607
REMOVAL
1.
Remove luggage side lower finisher RH. Refer to
INT-43, "LUGGAGE SIDE LOWER FINISHER :
.
2.
Disconnect harness connector (A), and then remove harness
fixing clip (B).
3.
Remove fixing screws (C), and then remove rear mode door
motor from rear A/C unit assembly.
INSTALLATION
Install in the reverse order of removal.
REAR AIR MIX DOOR MOTOR
REAR AIR MIX DOOR MOTOR : Removal and Installation
INFOID:0000000009652608
REMOVAL
1.
Set the temperature at 18
°
C (64
°
F).
CAUTION:
The angle may be out, when installing the air mix door motor to the air mix door, unless the above
procedure is performed.
2.
Disconnect the battery cable from the negative terminal.
3.
Remove luggage side lower finisher RH. Refer to
INT-43, "LUGGAGE SIDE LOWER FINISHER :
.
: Vehicle front
JMIIA1848ZZ
: Vehicle front
JMIIA1852ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст