Nissan Quest E52. Instruction — part 819
INSTRUMENT PANEL ASSEMBLY
IP-25
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
d.
Remove instrument panel assembly fixing screws (A), bolts (B).
e.
Remove instrument panel assembly from passenger door opening portion.
CAUTION:
• Cover tool with a shop cloth to prevent windshield glass from being damaged.
• Cover center console upper surface with a shop cloth to prevent it from being damaged.
• When removing instrument panel assembly, 2 workers are required so as to prevent it from drop-
ping.
45. Remove instrument upper garnish.
a.
Insert a remover tool between instrument upper garnish and instrument panel assembly to disengage
metal clips.
b.
Remove instrument upper garnish.
46. Remove the following parts after removing instrument panel assembly.
• Front passenger air bag module: Refer to
SR-18, "Removal and Installation"
• Side ventilator grille (LH/RH): Refer to
VTL-10, "SIDE VENTILATOR GRILLE : Removal and Installa-
• Center ventilator duct: Refer to
VTL-10, "CENTER VENTILATOR DUCT : Removal and Installation"
.
• Side ventilator duct: Refer to
VTL-10, "CENTER VENTILATOR DUCT : Removal and Installation"
.
• Front defroster nozzle: Refer to
VTL-11, "FRONT DEFROSTER NOZZLE : Removal and Installation"
• Side defroster nozzle: Refer to
VTL-11, "SIDE DEFROSTER NOZZLE : Removal and Installation"
.
• GPS antenna: Refer to
AV-629, "Removal and Installation"
JMJIA6160ZZ
: Metal clip
JMJIA6161ZZ
IP-26
< REMOVAL AND INSTALLATION >
INSTRUMENT PANEL ASSEMBLY
• Inside key antenna (instrument center) and harness clamp. Refer to
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Never use the steering wheel mounting nut after removal, replace with the new nut.
• Never use the driver air bag module mounting bolts after removal, replace with the new bolts.
• Never use the passenger air bag module mounting bolt after removal, replace with the new bolt.
CENTER CONSOLE ASSEMBLY
IP-27
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
IP
N
O
P
CENTER CONSOLE ASSEMBLY
Exploded View
INFOID:0000000009650901
CENTER CONSOLE ASSEMBLY (With NAVI)
JMJIA6162ZZ
1.
Center console upper finisher
2.
Center console body assembly
3.
Console sub-harness
4.
Console pocket assembly
5.
Console pocket rail
6.
Center console center bracket 2
7.
VTR jacks
8.
Console tray
9.
Power outlet
10. USB connector
11.
Mat
12. Center console assembly
13. Cap
14. Center console front bracket
15. Center console rear bracket
16. Center console center bracket 1
: Metal clip
,
,
,
,
,
: Indicates that the part is connected at points with same symbol in actual vehicle.
IP-28
< REMOVAL AND INSTALLATION >
CENTER CONSOLE ASSEMBLY
CENTER CONSOLE ASSEMBLY (Without NAVI)
Removal and Installation
INFOID:0000000009650902
Removal and Installation
CAUTION:
When removing, always use a remover tool that is made of plastic.
1.
Remove driver seat assembly and passenger seat assembly.
• Instruction seat: Refer to
SE-88, "Removal and Installation"
.
SE-102, "Removal and Installation"
.
JMJIA6163ZZ
1.
Center console upper finisher
2.
Center console body assembly
3.
Console pocket assembly
4.
Console pocket rail
5.
Center console center bracket 2
6.
Console tray
7.
Mat
8.
Center console assembly
9.
Cap
10. Center console front bracket
11.
Center console rear bracket
12. Center console center bracket 1
: Metal clip
,
,
,
,
,
: Indicates that the part is connected at points with same symbol in actual vehicle.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст