Nissan Quest E52. Instruction — part 811
LUGGAGE FLOOR TRIM
INT-43
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
2.
Remove luggage floor front bracket fixing bolts (A), and then
remove luggage floor front bracket.
INSTALLATION
Install in the reverse order of removal.
LUGGAGE SIDE LOWER FINISHER
LUGGAGE SIDE LOWER FINISHER : Removal and Installation
INFOID:0000000009650302
CAUTION:
• When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
• Never damage the body.
• Be careful not to damage when removing or installing, because opening portion of third roll sun-
shade is fragile and clips are damaged easily.
REMOVAL
1.
Remove tailgate kicking plate. Refer to
INT-40, "TAILGATE KICKING PLATE : Removal and Installation"
.
2.
Remove third seat. Refer to
SE-125, "Removal and Installation"
.
3.
Remove rear kicking plate. Refer to
INT-22, "KICKING PLATE : Removal and Installation"
4.
Remove rear body side welt. Refer to
INT-23, "BODY SIDE WELT : Removal and Installation"
5.
Slide second seat to the fully forward position. Tilt seatback forward.
6.
Remove second seat belt and third seat belt outer anchor.
• Second seat belt outer anchor: Refer to
SB-11, "SEAT BELT RETRACTOR : Removal and Installation"
.
• Third seat belt outer anchor: Refer to
SB-16, "SEAT BELT RETRACTOR : Removal and Installation"
.
7.
Remove luggage side lid and remove tool.
8.
Remove net hook.
a.
Insert a remover tool (A) into opening of net hook (1), and then
push out hook pin (2).
b.
Remove net hook.
9.
Disengage luggage side lower finisher fixing clips and pawls using a remover tool (A).
JMJIA6236ZZ
JMJIA4965ZZ
JMJIA6237ZZ
INT-44
< REMOVAL AND INSTALLATION >
LUGGAGE FLOOR TRIM
10. Disconnect harness connector, and then remove luggage side lower finisher.
CAUTION:
Never hold portions (A) when removing part from the vehi-
cle. Otherwise luggage side floor finisher may be cracked
or damaged.
INSTALLING
Note the following item, and install in the reverse order of removal.
CAUTION:
When installing, check in advance that clips are accurately aligned with the holes on body panel side,
and then install by pressing in.
THIRD ROLL SUNSHADE
THIRD ROLL SUNSHADE : Exploded View
INFOID:0000000009650303
Exploded View
: Clip
: Pawl
: Vehicle front
JMJIA6915ZZ
JMJIA4866ZZ
1.
Luggage side lower sunshade es-
cutcheon B
2.
Luggage side lower sunshade es-
cutcheon A
3.
Luggage side lower finisher
4.
Roll sunshade assembly
: Pawl
LUGGAGE FLOOR TRIM
INT-45
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
K
L
M
A
B
INT
N
O
P
THIRD ROLL SUNSHADE : Disassembly and Assembly
INFOID:0000000009650304
CAUTION:
• When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
• Never damage the luggage side lower finisher.
• Be careful not to damage when removing or installing, because opening portion of third roll sun-
shade is fragile and clips are damaged easily.
DISASSEMBLY
1.
Remove luggage side lower finisher. Refer to
INT-43, "LUGGAGE SIDE LOWER FINISHER : Removal
2.
Disengage luggage side lower sunshade escutcheon A and B
fixing pawls using a remover tool (A), and then remove luggage
side lower sunshade escutcheon A and B.
3.
Remove third roll sunshade fixing screws (A).
4.
Pull lower side of third roll sunshade forward, disengage pin,
and then lower third roll sunshade to remove.
ASSEMBLY
Assembly in the reverse order of disassembly.
LUGGAGE FLOOR BOX
LUGGAGE FLOOR BOX : Removal and Installation
INFOID:0000000009650305
CAUTION:
• When removing, always use a remover tool that is made of plastic to prevent damage to the parts.
• Never damage the body.
REMOVAL
1.
Remove tailgate kicking plate. Refer to
INT-40, "TAILGATE KICKING PLATE : Removal and Installation"
.
2.
Remove third seat. Refer to
SE-125, "Removal and Installation"
.
3.
Remove luggage floor center board and luggage floor front box. (with BOSE audio)
4.
Remove BOSE amp.
• BOSE audio without navigation: Refer to
AV-407, "Removal and Installation"
• BOSE audio with navigation: Refer to
AV-613, "Removal and Installation"
.
5.
Remove woofer.
• BOSE audio without navigation: Refer to
AV-414, "Removal and Installation"
• BOSE audio with navigation: Refer to
AV-620, "Removal and Installation"
.
: Pawl
JMJIA4967ZZ
JMJIA4968ZZ
INT-46
< REMOVAL AND INSTALLATION >
LUGGAGE FLOOR TRIM
6.
Pull up carpet, and then remove fixing grommet (B) on the front
side of luggage floor box using a remover tool (A).
7.
Remove fixing clips (A) on the rear side of luggage floor box,
and then remove luggage floor box toward vehicle upper while
disconnecting pinching to luggage side lower finisher.
INSTALLING
Install in the reverse order of removal.
: Vehicle front
JMJIA6238ZZ
: Vehicle front
JMJIA6239ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст