Nissan Quest E52. Instruction — part 664
ROOF SIDE MOLDING
EXT-31
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
• Use double-sided tape after hardening for roof side molding clips.
• Securely insert molding rear end cap onto roof rear end cutout (installation standard).
• When installing roof side molding of windshield glass portion, check that body side molding fas-
tener is securely inserted and then press in.
• Never wash the vehicle within 24 hours so as to keep adhesive.
EXT-32
< REMOVAL AND INSTALLATION >
ROOF RAIL
ROOF RAIL
Exploded View
INFOID:0000000009650507
Removal and Installation
INFOID:0000000009650508
REMOVAL
1.
Remove front roof rail cover with remover tool (A).
CAUTION:
Apply protective tape (B) around the roof rail.
2.
Remove rear roof rail cover with remover tool (A).
CAUTION:
Apply protective tape (B) around the roof rail.
3.
Remove roof rail mounting bolts, and then remove roof rail assembly.
INSTALLATION
Install in the reverse order of removal.
1.
Front roof rail cover
2.
Roof rail assembly
3.
Rear roof rail cover
JMKIA8230ZZ
: Pawl
JMKIA8231ZZ
: Pawl
JMKIA8232ZZ
DOOR OUTSIDE MOLDING
EXT-33
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
DOOR OUTSIDE MOLDING
Exploded View
INFOID:0000000009650509
Removal and Installation
INFOID:0000000009650510
FRONT DOOR OUTSIDE MOLDING
Removal
1.
Fully open front door glass.
2.
Remove front door outside molding fixing screw (A).
1.
Screw grommet
2.
Front door outside molding
3.
Clip
4.
Slide door outside molding
5.
Door grass
6.
Front door panel
7.
Slide door panel
: Pawl
JMKIA6188GB
JMKIA6268ZZ
EXT-34
< REMOVAL AND INSTALLATION >
DOOR OUTSIDE MOLDING
3.
Insert a remover tool (A) into lower space.
4.
Disengage pawls of fixing front door outside molding with flated-
blade screwdriver (B).
CAUTION:
Apply protection tape (C) around outer circumference of
front door.
5.
Twist door outside molding toward the outside of the vehicle,
and then lift up and remove it while disengaging the pawls.
Installation
Note the following item, and then install in the reverse order of removal.
CAUTION:
When installing front door outside molding, check that pawl (1)
is accurately aligned with mounting hole (2), then press in.
SLIDE DOOR OUTSIDE MOLDING
Removal
1.
Fully open slide door glass.
2.
Remove slide door corner outer cover. Refer to
EXT-36, "Removal and Installation"
3.
Remove slide door outside molding fixing screw (A).
4.
Lift up slide door outside molding toward vehicle upper to remove.
: Pawl
JMKIA6270ZZ
JMKIA6269ZZ
JMKIA5669ZZ
JMKIA6271ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст