Nissan Quest E52. Instruction — part 665
DOOR OUTSIDE MOLDING
EXT-35
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
5.
Disengage pawl of fixing rear door outside molding with flated-
blade screwdriver.
Installation
Install in the reverse order of removal.
: Pawl
JMKIA6272ZZ
EXT-36
< REMOVAL AND INSTALLATION >
DOOR SASH MOLDING
DOOR SASH MOLDING
Exploded View
INFOID:0000000009650511
Removal and Installation
INFOID:0000000009650512
FRONT DOOR SASH MOLDING
Removal
1.
Remove front door outside molding. Refer to
EXT-33, "Removal and Installation"
.
2.
Remove front door sash cover.
3.
Disengage front door sash molding and door sash using a remover tool starting from vehicle rear to vehi-
cle front. Remove front door sash molding.
Installation
Note the following item, and then install in the reverse order of removal.
CAUTION:
Never reuse front door outside molding once it is removed.
SLIDE DOOR SASH MOLDING
Removal
1.
Remove slide door corner outer cover.
2.
Remove slide door outside molding. Refer to
EXT-33, "Removal and Installation"
3.
Remove slide door sash cover.
4.
Remove slide door sash. Refer to
GW-32, "Removal and Installation"
.
1.
Front door sash molding
2.
Front door sash cover
3.
Slide door sash cover
4.
Slide door corner outer cover
5.
Slide door sash molding
6.
Screw grommet
: Clip
: Always replace after every disassembly.
JMKIA6189ZZ
DOOR SASH MOLDING
EXT-37
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
EXT
N
O
P
5.
Remove slide door upper sash. Refer to
GW-32, "Removal and Installation"
6.
Remove slide door sash molding fixing screw, and then remove slide door sash molding.
Installation
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Tighten slide door sash mounting screws in numerical order
from 1 to 5.
• Tighten slide door sash molding front end mounting screw
(A).
• Tighten slide door sash molding rear end mounting screw (A).
FRONT DOOR SASH COVER
Removal
1.
Remove front door outside molding. Refer to
EXT-33, "Removal and Installation"
2.
Remove front door sash cover fixing screw (A).
JMKIA6296ZZ
JMKIA6267ZZ
JMKIA6266ZZ
JMKIA5002ZZ
EXT-38
< REMOVAL AND INSTALLATION >
DOOR SASH MOLDING
3.
Insert a remover tool (A) between front door sash cover (1) and
door panel, cut double-sided tape using a cutter (B) while lifting
front door sash cover, and remove front door sash cover.
CAUTION:
• Use a remover tool which is made of a material that does
not damage door panel.
• Never lift front door sash cover with excessive force.
Installation
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Never reuse front door sash cover once it is removed.
• Never wash the vehicle within 24 hours so as to keep adhesive.
SLISDE DOOR SASH COVER
Removal
1.
Remove slide door outside molding. Refer to
EXT-33, "Removal and Installation"
2.
Insert a remover tool (A) between slide door sash cover and
door panel, cut double-sided tape using a cutter (B) while lifting
slide door sash cover.
CAUTION:
• Use a remover tool which is made of a material that does
not damage door panel.
• Never lift rear door sash cover with excessive force.
3.
Disengage slide door sash cover fixing clips, and then remove
slide door sash cover.
Installation
Note the following items, and install in the reverse order of removal.
CAUTION:
• Never reuse slide door sash cover once it is removed.
• Never wash the vehicle within 24 hours so as to keep adhesive.
SLIDE DOOR CORNER OUTER COVER
Removal
1.
Insert a remover tool (A) between slide door corner outer cover
and door panel, cut double-sided tape using a cutter (B) while
lifting slide door corner outer cover.
CAUTION:
• Use a remover tool which is made of a material that does not
damage door panel.
• Never lift up slide door corner outer cover with excessive
force.
2.
Disengage slide door corner outer cover fixing clip, and then
remove slide door corner outer cover.
Installation
Note the following items, and install in the reverse order of removal.
CAUTION:
• Never reuse slide door corner outer cover once it is removed
• Never wash the vehicle within 24 hours so as to keep adhesive.
JMKIA2034ZZ
: Clip
JMKIA6242ZZ
: Clip
JMKIA6243ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст