Nissan Quest E52. Instruction — part 432
DLK-442
< REMOVAL AND INSTALLATION >
SLIDE DOOR
• Perform work with 2 workers, because of its heavy weight.
• When removing and installing slide door assembly, support door with a jack and shop cloth to pro-
tect door and body.
REMOVAL
1.
Remove slide door upper stopper. Refer to
DLK-447, "SLIDE DOOR UPPER STOPPER : Removal and
.
2.
Support the front of slide door with the proper material to prevent it from falling.
WARNING:
Bodily injury may occur if no supporting jack is holding slide door open when removing upper
roller assembly.
3.
Remove upper roller assembly mounting bolts.
4.
Remove upper roller assembly and sub roller as a set.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Apply anticorrosive agent onto the mounting surface.
• Check slide door open/close operation after installation.
• When removing and installing slide door assembly, perform the fitting adjustment. Refer to
.
• After installing, apply the touch-up paint (the body color) onto the head of upper roller mounting
bolts.
REAR ROLLER
REAR ROLLER : Removal and Installation
INFOID:0000000009649441
CAUTION:
• Perform work with 2 workers, because of its heavy weight.
• When removing and installing slide door assembly, support door with a jack and shop cloth to pro-
tect door and body.
REMOVAL
1.
Remove slide door rail cover. Refer to
EXT-43, "Removal and Installation"
2.
Support the end of slide door with the proper material to prevent it from falling.
WARNING:
Bodily injury may occur if no supporting jack is holding slide door open when removing rear
roller.
3.
Remove rear roller mounting bolts.
4.
Disconnect cable holder of automatic sliding door unit (automatic sliding door models). Refer to
"AUTOMATIC SLIDING DOOR UNIT : Removal and Installation"
5.
Remove rear roller.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Apply anticorrosive agent onto the mounting surface.
• Check slide door open/close operation after installation.
• When removing and installing slide door assembly, perform the fitting adjustment. Refer to
.
• After installing, apply the touch-up paint (the body color) onto the head of rear roller mounting bolts.
LOWER ROLLER
LOWER ROLLER : Removal and Installation
INFOID:0000000009649442
CAUTION:
• Perform work with 2 workers, because of its heavy weight.
• When removing and installing slide door assembly, support door with a jack and shop cloth to pro-
tect door and body.
SLIDE DOOR
DLK-443
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
REMOVAL
1.
Remove slide door finisher. Refer to
INT-17, "Removal and Installation"
2.
Remove lower latch. Refer to
DLK-443, "LOWER LATCH : Removal and Installation"
3.
Remove slide door lower striker. Refer to
DLK-446, "SLIDE DOOR LOWER STRIKER : Removal and
.
4.
Support the front of slide door with the proper material to prevent it from falling.
WARNING:
Bodily injury may occur if no supporting jack is holding slide door open when removing lower
roller.
5.
Remove the mounting bolts, and then remove the lower roller.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Apply anticorrosive agent onto the mounting surface.
• Check slide door open/close operation after installation.
• When removing and installing slide door assembly, perform the fitting adjustment. Refer to
.
• After installing, apply the touch-up paint (the body color) onto the head of lower roller mounting
bolts.
LOWER LATCH
LOWER LATCH : Removal and Installation
INFOID:0000000009649443
REMOVAL
1.
Remove rear kicking plate. Refer to
INT-22, "KICKING PLATE : Removal and Installation"
2.
Remove lower latch mounting bolts.
3.
Disconnect remote control door lock cable (2) from lower latch
(1).
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:
After installation, check door open/close, lock/unlock operation.
DOVETAIL
DOVETAIL : Removal and Installation
INFOID:0000000009649444
REMOVAL
Remove the mounting bolts, and then remove the dovetail (male/female).
INSTALLATION
Install in the reverse order of removal.
1.
Install dovetail (male).
2.
Temporarily tighten dovetail (female) mounting bolts.
3.
Perform the fitting adjustment.
a.
Open and close two or three times slide doors.
b.
Open the slide door, and then tighten the dovetail (female) mounting bolts.
: Vehicle front
JMKIA6323ZZ
DLK-444
< REMOVAL AND INSTALLATION >
SLIDE DOOR
CAUTION:
After installation, check that the direction of arrows (A), as shown in the figure, faces toward passen-
ger room.
BUMPER RUBBER
BUMPER RUBBER : Removal and Installation
INFOID:0000000009649445
BUMPER RUBBER
Removal
Pull out bumper rubber forward while rotating it counterclockwise to remove.
Installation
Install in the reverse order of removal.
STOPPER RUBBER
Removal
Disengage pawl of stopper rubber to remove.
Installation
Install in the reverse order of removal.
BUMPER RUBBER (BODY UPPER PORTION AND SLIDE DOOR REAR LOWER PORTION)
Removal
Dovetail (female)
Dovetail (male)
JMKIA6290ZZ
JMKIA6291ZZ
: Pawl
: Vehicle front
JMKIA6292ZZ
SLIDE DOOR
DLK-445
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Pull out and disengage bumper rubber to remove.
CAUTION:
When installing, check that mark (C) on bumper rubber of body upper portion (A) and slide door rear
lower portion (B) are visible to vehicle upper side.
Installation
Install in the reverse order of removal.
SLIDE DOOR LOWER WEATHER-STRIP
SLIDE DOOR LOWER WEATHER-STRIP : Removal and Installation
INFOID:0000000009649446
REMOVAL
Remove fixing screws and clips, and then remove slide door lower weather-strip.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• When installing, check that lip portion (A) of slide door lower
weather-strip overlaps end of slide door panel (1).
• When installing, install mounting clips (A) and mounting
screws (B) in numerical order as shown in the figure.
SLIDE DOOR OUTSIDE PROTECTOR
SLIDE DOOR OUTSIDE PROTECTOR : Removal and Installation
INFOID:0000000009649447
REMOVAL
Remove slide door outside protector while peeling double-sided adhesive tape.
: Vehicle front
JMKIA6293ZZ
JMKIA6310ZZ
JMKIA6311ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст