Nissan Quest E52. Instruction — part 431
DLK-438
< REMOVAL AND INSTALLATION >
SLIDE DOOR
DOOR ASSEMBLY
DOOR ASSEMBLY : Removal and Installation
INFOID:0000000009649437
CAUTION:
• Perform work with 2 workers, because of its heavy weight.
• When removing and installing slide door assembly, support door with a jack and shop cloth to pro-
tect door and body.
REMOVAL
1.
Remove slide door protect molding. Refer to
EXT-26, "SLIDE DOOR PROTECT MOLDING : Removal
2.
Remove slide door finisher. Refer to
INT-17, "Removal and Installation"
3.
Remove lower latch. Refer to
DLK-443, "LOWER LATCH : Removal and Installation"
4.
Disconnect uninterruptible power supply harness from slide door panel.
a.
Disconnect harness connector (1).
b.
Remove harness connectors (1) from harness connector
bracket (2).
c.
Remove mounting bolts (A), and then remove uninterruptible
power supply harness (1) from slide door panel (2).
5.
Remove upper roller assembly mounting bolts. Refer to
DLK-441, "UPPER ROLLER : Removal and
.
6.
Remove rear roller mounting bolts. Refer to
DLK-442, "REAR ROLLER : Removal and Installation"
: Clip
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
: Vehicle front
JMKIA6286ZZ
: Vehicle front
JMKIA6287ZZ
: Vehicle front
JMKIA6288ZZ
SLIDE DOOR
DLK-439
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
7.
Remove lower roller mounting bolts. Refer to
DLK-442, "LOWER ROLLER : Removal and Installation"
.
8.
Remove slide door assembly.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Apply anticorrosive agent onto the mounting surface.
• Check slide door open/close, lock/unlock operation after installation.
• After installation, perform the fitting adjustment. Refer to
DLK-440, "DOOR ASSEMBLY : Adjust-
• After installation, apply touch-up paint (the body color) onto the head of slide door roller mounting
bolts.
DLK-440
< REMOVAL AND INSTALLATION >
SLIDE DOOR
DOOR ASSEMBLY : Adjustment
INFOID:0000000009649438
Check the clearance and the surface height between slide door each part by visually and touching.
If the clearance and the surface height are out of specification, adjust them according to the procedures
shown below.
1.
Slide door
2.
Upper roller assembly
3.
Lower roller
4.
Rear roller
5.
Door striker (front)
6.
TORX bolt
7.
Door striker (rear)
8.
Body side outer
9.
Front door
10. Body side outer
: N·m (kg-m, ft-lb)
JMKIA8264GB
SLIDE DOOR
DLK-441
< REMOVAL AND INSTALLATION >
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
FITTING ADJUSTMENT PROCEDURE
Loosen the upper roller assembly, lower roller and rear roller mounting bolts, adjust the surface of slide door
according to the fitting standard dimension.
DOOR STRIKER ADJUSTMENT
Adjust door striker so that it becomes parallel with door lock insertion direction.
CAUTION:
After installation, apply touch-up paint (the body color) onto the head of slide door roller mounting
bolts.
DOOR STRIKER
DOOR STRIKER : Removal and Installation
INFOID:0000000009649439
REMOVAL
Door striker (front)
Remove mounting TORX bolts, and then remove door striker (front).
Door striker (rear)
Remove mounting bolts, and then remove door striker (rear).
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Apply anticorrosive agent onto the mounting surface.
• After installation, be sure to perform the fitting adjustment. Refer to
• After installation, check that the direction of arrows (A), as shown in the figure, faces toward passen-
ger room.
UPPER ROLLER
UPPER ROLLER : Removal and Installation
INFOID:0000000009649440
CAUTION:
Portion
Standard
Slide door – Body side outer
F – F
I
Clearance
5.1 – 7.1 mm (0.201 – 0.280 in)
J
Surface height
(
−
1.0) – (+1.0) mm [(
−
0.039) –
(+0.039) in]
Front door – Slide door
G – G
K
Surface height
(
−
1.0) – (+1.0) mm [(
−
0.039) –
(+0.039) in]
L
Clearance
3.5 – 6.5 mm (0.138 – 0.256 in)
Slide door – Body side outer
H – H
M
Surface height
(
−
1.0) – (+1.0) mm [(
−
0.039) –
(+0.039) in]
N
Clearance
3.3 – 6.3 mm (0.130 – 0.248 in)
Door striker (front)
Door striker (rear)
JMKIA6289ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст