Nissan Cube. Instruction — part 110
BRC-90
< ECU DIAGNOSIS INFORMATION >
[VDC/TCS/ABS]
ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
OFF LAMP
VDC OFF indicator lamp
(Note 3)
When VDC OFF indicator lamp is ON
On
When VDC OFF indicator lamp is OFF
Off
SLIP/VDC LAMP
VDC warning lamp
(Note 3)
When VDC warning lamp is ON
On
When VDC warning lamp is OFF
Off
PRESS SENSOR
Brake fluid pressure detected by pressure
sensor
With ignition switch turned ON and brake
pedal released
Approx. 0 bar
With ignition switch turned ON and brake
pedal depressed
–40 to 300 bar
ACCEL POS SIG
Throttle actuator opening/closing is dis-
played (linked with accelerator pedal)
Accelerator pedal not depressed (ignition
switch is ON)
0 %
Depress accelerator pedal (ignition
switch is ON)
0 - 100 %
SIDE G-SENSOR
Transverse G detected by side G sensor
Vehicle stopped
Approx. 0 m/s
2
Turning right
Negative value
Turning left
Positive value
STR ANGLE SIG
Steering angle detected by steering angle
sensor
Driving straight
±
2.5
°
Turn 90
°
to right
Approx. +90
°
Turn 90
°
to left
Approx.
−
90
°
ENGINE RPM
With engine running
With engine stopped
0 [tr/min (rpm)]
Engine running
Almost in accor-
dance with tachome-
ter display
FLUID LEV SW
Brake fluid level switch signal status
When brake fluid level switch ON
On
When brake fluid level switch OFF
Off
EBD WARN LAMP
Brake warning lamp
(Note 3)
When brake warning lamp is ON
On
When brake warning lamp is OFF
Off
CV1
VDC switch-over valve
When actuator (switch-over valve) is ac-
tive (“ACTIVE TEST” in “ABS” with CON-
SULT)
On
When actuator (switch-over valve) is not
active and actuator relay is active (igni-
tion switch ON)
Off
CV2
VDC switch-over valve
When actuator (switch-over valve) is ac-
tive (“ACTIVE TEST” in “ABS” with CON-
SULT)
On
When actuator (switch-over valve) is not
active and actuator relay is active (igni-
tion switch ON)
Off
SV1
VDC switch-over valve
When actuator (switch-over valve) is ac-
tive (“ACTIVE TEST” in “ABS” with CON-
SULT)
On
When actuator (switch-over valve) is not
active and actuator relay is active (igni-
tion switch ON)
Off
SV2
VDC switch-over valve
When actuator (switch-over valve) is ac-
tive (“ACTIVE TEST” in “ABS” with CON-
SULT)
On
When actuator (switch-over valve) is not
active and actuator relay is active (igni-
tion switch ON)
Off
Monitor item
Display content
Data monitor
Condition
Reference value in
normal operation
ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
BRC-91
< ECU DIAGNOSIS INFORMATION >
[VDC/TCS/ABS]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
NOTE:
• 1: Confirm tire pressure is normal.
• 2: A brief moment of On/Off condition occurs every 20 seconds after ignition switch turned ON. This is not malfunction because it is an
operation for checking.
• 3: On and off timing for warning lamp and indicator lamp.
.
- Brake warning lamp: refer to
- VDC OFF indicator lamp: refer to
- VDC warning lamp: refer to
.
EBD SIGNAL
EBD operation
EBD is active
On
EBD is inactive
Off
ABS SIGNAL
ABS operation
ABS is active
On
ABS is inactive
Off
TCS SIGNAL
TCS operation
TCS is active
On
TCS is inactive
Off
VDC SIGNAL
VDC operation
VDC is active
On
VDC is inactive
Off
EBD FAIL SIG
EBD fail-safe signal
In EBD fail-safe
On
EBD is normal
Off
ABS FAIL SIG
ABS fail-safe signal
In ABS fail-safe
On
ABS is normal
Off
TCS FAIL SIG
TCS fail-safe signal
In TCS fail-safe
On
TCS is normal
Off
VDC FAIL SIG
VDC fail-safe signal
In VDC fail-safe
On
VDC is normal
Off
CRANKING SIG
Crank operation
Crank is active
On
Crank is inactive
Off
PARK BRAKE SW
Parking brake switch signal status
Parking brake switch is active
On
Parking brake switch is inactive
Off
V/R OUTPUT
Solenoid valve relay activated
When the solenoid valve relay is active
(When ignition switch OFF)
On
When the solenoid valve relay is not ac-
tive (in the fail-safe mode)
Off
M/R OUTPUT
Actuator motor and motor relay activated
When the actuator motor and motor relay
are active
(“ACTIVE TEST” in “ABS” with CON-
SULT)
On
When the actuator motor and motor relay
are inactive
Off
Monitor item
Display content
Data monitor
Condition
Reference value in
normal operation
BRC-92
< ECU DIAGNOSIS INFORMATION >
[VDC/TCS/ABS]
ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
Wiring Diagram
INFOID:0000000009950026
JCFWM0746GB
ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
BRC-93
< ECU DIAGNOSIS INFORMATION >
[VDC/TCS/ABS]
C
D
E
G
H
I
J
K
L
M
A
B
BRC
N
O
P
JRFWC1191GB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст