Nissan Versa Sedan. Instruction — part 877
TM-414
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F11A]
MAIN POWER SUPPLY AND GROUND CIRCUIT
3. Check continuity between IPDM E/R harness connector terminal and TCM harness connector terminals.
Is the check result normal?
YES
>> GO TO 6.
NO
>> Repair or replace malfunctioning parts.
6.
CHECK CIRCUIT BETWEEN IPDM E/R AND TCM (PART 2)
Check continuity between IPDM E/R harness connector terminal and ground.
Is the check result normal?
YES
>> GO TO 7.
NO
>> Repair or replace malfunctioning parts.
7.
DETECT MALFUNCTIONING ITEMS (PART 2)
Check the following items:
• Harness open circuit or short circuit between ignition switch and IPDM E/R. Refer to
gram — Ignition Power Supply —"
• 10A fuse (No.49, IPDM E/R). Refer to
PG-62, "IPDM E/R Terminal Arrangement"
• IPDM E/R
Is the check result normal?
YES
>> Check intermittent incident. Refer to
GI-45, "Intermittent Incident"
.
NO
>> Repair or replace malfunctioning parts.
IPDM E/R harness connector
TCM harness connector
Continuity
Connector
Terminal
Connector
Terminal
E45
21
F44
47
Existed
48
IPDM E/R harness connector
Ground
Continuity
Connector
Terminal
E45
21
Ground
Not existed
OVERDRIVE CONTROL SWITCH
TM-415
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F11A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
OVERDRIVE CONTROL SWITCH
Component Function Check
INFOID:0000000009268230
1.
CHECK OD OFF INDICATOR LAMP FUNCTION
Check OD OFF indicator lamp turns ON for approx. 2 seconds when ignition switch turns ON.
Is the inspection results normal?
YES
>> GO TO 2.
NO
>> Go to
2.
CHECK OVERDRIVE CONTROL SWITCH FUNCTION
1. Shift the selector lever to “D” position.
2. Check that OD OFF indicator lamp turns ON/OFF when overdrive control switch is operated.
Is the inspection results normal?
YES
>> INSPECTION END
NO
>> Go to
Diagnosis Procedure
INFOID:0000000009268231
1.
CHECK OVERDRIVE CONTROL SWITCH CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect CVT shift selector connector.
3. Turn ignition switch ON.
4. Check voltage between CVT shift selector harness connector terminals.
Is the inspection result normal?
YES
>> GO TO 2.
NO
>> GO TO 4.
2.
CHECK OVERDRIVE CONTROL SWITCH
Check overdrive control switch. Refer to
TM-416, "Component Inspection (Overdrive Control Switch)"
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace malfunctioning parts.
3.
CHECK GROUND CIRCUIT
Check continuity between CVT shift selector harness connector terminal and ground.
Is the inspection result normal?
YES
>> GO TO 4.
NO
>> Repair or replace malfunctioning parts.
4.
CHECK CIRCUIT BETWEEN COMBINATION METER AND CVT SHIFT SELECTOR (PART 1)
1. Turn ignition switch OFF.
2. Disconnect combination meter connector.
3. Check continuity between combination meter harness connector terminal and CVT shift selector harness
connector terminal.
CVT shift selector
Voltage
Connector
+
−
Terminal
M38
1
2
Approx. 5 V
CVT shift selector
Ground
Continuity
Connector
Terminal
M38
2
Ground
Existed
TM-416
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F11A]
OVERDRIVE CONTROL SWITCH
*1: TYPE A (Refer to
*2: TYPE B (Refer to
Is the inspection result normal?
YES
>> GO TO 5.
NO
>> Repair or replace malfunctioning parts.
5.
CHECK CIRCUIT BETWEEN COMBINATION METER AND CVT SHIFT SELECTOR (PART 2)
Check continuity between combination meter harness connector terminal and ground.
*1: TYPE A (Refer to
*2: TYPE B (Refer to
.)
Is the inspection result normal?
YES
>> GO TO 6.
NO
>> Repair or replace malfunctioning parts.
6.
CHECK COMBINATION METER INPUT SIGNAL
1. Connect all of disconnected connectors.
2. Turn ignition switch ON.
3. Select “Data Monitor” in “METER/M&A”.
4. Select “O/D OFF SW”.
5. Check that “O/D OFF SW” turns ON/OFF when overdrive control switch is operated. Refer to
Is the inspection result normal?
YES
>> Check intermittent incident. Refer to
GI-45, "Intermittent Incident"
.
NO
>> Replace combination meter. Refer to
MWI-53, "Removal and Installation"
Component Inspection (Overdrive Control Switch)
INFOID:0000000009268232
1.
CHECK OVERDRIVE CONTROL SWITCH
Check continuity between wires of selector lever knob (1)
Is the inspection result normal?
YES
>> INSPECTION END
NO
>> Replace selector lever knob. Refer to
.
Combination meter
CVT shift selector
Continuity
Connector
Terminal
Connector
Terminal
M82
*1
8
M38
1
Existed
M24
*2
28
Existed
Combination meter
Ground
Continuity
Connector
Terminal
M82
*1
8
Ground
Not existed
M24
*2
28
Condition
Continuity
Overdrive control switch is depressed
Existed
Overdrive control switch is depressed
Not existed
JSDIA1969ZZ
OD OFF INDICATOR LAMP
TM-417
< DTC/CIRCUIT DIAGNOSIS >
[CVT: RE0F11A]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
OD OFF INDICATOR LAMP
Component Function Check
INFOID:0000000009268233
1.
CHECK OD OFF INDICATOR LAMP FUNCTION
Check OD OFF indicator lamp turns ON for approx. 2 seconds when ignition switch turns ON.
Is the inspection results normal?
YES
>> INSPECTION END
NO
>> Go to
Diagnosis Procedure
INFOID:0000000009268234
1.
CHECK DTC (TCM)
With CONSULT
1. Turn ignition switch ON.
2. Check “Self Diagnostic Results” in “TRANSMISSION”.
Is any DTC detected?
YES
>> Check DTC detected item. Refer to
NO
>> GO TO 2.
2.
CHECK DTC (COMBINATION METER)
With CONSULT
Check “Self Diagnostic Results” in “METER/M&A”.
Is any DTC detected?
YES
>> Check DTC detected item. Refer to
NO
>> GO TO 3.
3.
CHECK COMBINATION METER INPUT SIGNAL
With CONSULT
1. Shift the selector lever to “D” position.
2. Select “Data Monitor” in “METER/M&A”.
3. Select “O/D OFF IND”.
4. Check that “O/D OFF IND” turns ON/OFF when overdrive control switch is operated. Refer to
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-53, "Removal and Installation"
NO
>> GO TO 4.
4.
CHECK TCM INPUT/OUTPUT SIGNAL
With CONSULT
1. Select “Data Monitor” in “TRANSMISSION”.
2. Select “SPORT MODE SW”.
3. Check that “SPORT MODE SW” turns ON/OFF when overdrive control switch is operated. Refer to
Is the inspection result normal?
YES
>> Replace combination meter. Refer to
MWI-53, "Removal and Installation"
NO
>> Check overdrive control switch. Refer to
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст