Nissan Rogue. Instruction — part 244

DAS

C1A17 DISTANCE SENSOR

DAS-147

< DTC/CIRCUIT DIAGNOSIS >

[DRIVER ASSISTANCE SYSTEM]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

C1A17 DISTANCE SENSOR

DTC Logic

INFOID:0000000011277305

DTC DETECTION LOGIC

NOTE:

If DTC C1A17 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to

DAS-

106, "DISTANCE SENSOR : DTC Logic"

.

Diagnosis Procedure

INFOID:0000000011277306

1.

REPLACE DISTANCE SENSOR

>> Replace distance sensor. Refer to

DAS-170, "Removal and Installation"

.

CONSULT Display

DTC detecting condition

Possible causes

LASER SENSOR FAIL
[C1A17]

Distance sensor is malfunctioning.

Distance sensor.

DAS-148

< DTC/CIRCUIT DIAGNOSIS >

[DRIVER ASSISTANCE SYSTEM]

C1A18 RADAR AIMING INCMP

C1A18 RADAR AIMING INCMP

DTC Logic

INFOID:0000000011277307

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

1.

PERFORM SELF DIAGNOSTIC RESULT

1. Start the engine.

2. Perform “Self Diagnostic Result” of “LASER/RADAR” using CONSULT.
Is DTC detected?

YES

>> Refer to

DAS-148, "Diagnosis Procedure"

.

NO

>> Inspection End.

Diagnosis Procedure

INFOID:0000000011277308

1.

ADJUST DISTANCE SENSOR

Perform Distance Sensor Initial Vertical Alignment and Distance Sensor Alignment.

>> Refer to

DAS-70, "Description"

and

DAS-72, "Description"

.

CONSULT Display

DTC Detection Condition

Possible Cause

LASER AIMING INCMP
[C1A18]

Distance sensor not adjusted.

• Distance sensor aiming adjustment not per-

formed.

• Distance sensor aiming adjustment interrupt-

ed.

DAS

C1A21 UNIT HIGH TEMP

DAS-149

< DTC/CIRCUIT DIAGNOSIS >

[DRIVER ASSISTANCE SYSTEM]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

C1A21 UNIT HIGH TEMP

DTC Logic

INFOID:0000000011277309

DTC DETECTION LOGIC

1.

PERFORM SELF DIAGNOSTIC RESULT

1. Turn ignition switch OFF.

2. Wait for 10 minutes or more to cool the distance sensor.

3. Start the engine.

4. Perform “Self Diagnostic Result” of “LASER/RADAR” using CONSULT.
Is DTC detected?

YES

>> Replace distance sensor. Refer to

DAS-170, "Removal and Installation"

.

NO

>> Refer to

GI-44, "Intermittent Incident"

.

CONSULT Display

DTC detecting condition

Possible causes

UNIT HIGH TEMP
[C1A21]

Distance sensor judges high temperature abnor-
mality.

Temperature around distance sensor high.

DAS-150

< DTC/CIRCUIT DIAGNOSIS >

[DRIVER ASSISTANCE SYSTEM]

C1A24 NP RANGE

C1A24 NP RANGE

DTC Logic

INFOID:0000000011277310

DTC DETECTION LOGIC

NOTE:

If DTC C1A24 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to

DAS-

106, "DISTANCE SENSOR : DTC Logic"

.

DTC CONFIRMATION PROCEDURE

1.

CHECK SELF DIAGNOSTIC RESULT (1)

1. Start the engine.

2. Shift selector lever to P position and wait for approximately 5 minutes or more.

3. Perform “Self Diagnostic Result” of “LASER/RADAR” using CONSULT.
Is DTC detected?

YES

>> Refer to

DAS-150, "Diagnosis Procedure"

.

NO

>> GO TO 2.

2.

CHECK SELF DIAGNOSTIC RESULT (2)

1. Shift selector lever to N position and wait for approximately 5 minutes or more.

2. Perform “Self Diagnostic Result” of “LASER/RADAR” using CONSULT.
Is DTC detected?

YES

>> Refer to

DAS-150, "Diagnosis Procedure"

.

NO

>> Refer to

GI-44, "Intermittent Incident"

.

Diagnosis Procedure

INFOID:0000000011277311

1.

CHECK SELF DIAGNOSTIC RESULT OF TCM

Perform “Self Diagnostic Result” of “TRANSMISSION” using CONSULT.
Are any DTCs detected?

YES

>> Refer to

TM-63, "DTC Index"

.

NO

>> Replace distance sensor. Refer to

DAS-170, "Removal and Installation"

.

CONSULT Display

DTC Detection Condition

Possible Cause

NP RANGE
[C1A24]

A mismatch between shift position signal and a
current gear position signal transmitted from
TCM via CAN communication that continues for
60 seconds or more.

• TCM.
• Transmission range switch.