Nissan Rogue. Instruction — part 625
HIGH-MOUNTED STOP LAMP
EXL-129
< REMOVAL AND INSTALLATION >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
HIGH-MOUNTED STOP LAMP
Exploded View
INFOID:0000000011280797
Removal and Installation
INFOID:0000000011280798
REMOVAL
1. Remove access cover using a suitable tool. Refer to
2. Remove high-mounted stop lamp nuts.
3. Disconnect the harness connector from high-mounted stop lamp and remove.
INSTALLATION
Installation is in the reverse order of removal.
Bulb Replacement
INFOID:0000000011280799
HIGH-MOUNTED STOP LAMP BULB
The high-mounted stop lamp bulb is not serviced separately. Refer to
EXL-129, "Removal and Installation"
1.
High-mounted stop lamp
2.
Back door
Stud
AWLIA2320ZZ
EXL-130
< REMOVAL AND INSTALLATION >
[HALOGEN HEADLAMP]
BACK-UP LAMP ASSEMBLY
BACK-UP LAMP ASSEMBLY
Exploded View
INFOID:0000000011280800
Removal and Installation
INFOID:0000000011280801
REMOVAL
1. Remove back door finisher. Refer to
INT-38, "Removal and Installation"
.
2. Remove back-up lamp assembly nuts.
3. Pull back-up lamp assembly rearward, disconnect the harness connector and remove.
INSTALLATION
Installation is in the reverse order of removal.
Bulb Replacement
INFOID:0000000011280802
WARNING:
Do not touch bulb with bare hand while it is lit or right after being turned off. Burning may result.
CAUTION:
• Do not touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to pre-
vent damage to the bulb.
• Do not leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
TAIL LAMP BULB
Removal
1. Remove back-up lamp assembly. Refer to
EXL-130, "Removal and Installation"
.
2. Rotate tail lamp bulb socket counterclockwise and remove.
3. Remove tail lamp bulb from bulb socket.
Installation
Installation is in the reverse order of removal.
CAUTION:
After installing the bulb, install bulb socket securely for watertightness.
BACK-UP LAMP BULB
Removal
1.
Back-up lamp assembly
2.
Back door
Clip
Stud
ALLIA1400ZZ
BACK-UP LAMP ASSEMBLY
EXL-131
< REMOVAL AND INSTALLATION >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
1. Remove back-up lamp assembly. Refer to
EXL-130, "Removal and Installation"
.
2. Rotate back-up lamp bulb socket counterclockwise and remove.
3. Remove back-up lamp bulb from bulb socket.
Installation
Installation is in the reverse order of removal.
CAUTION:
After installing the bulb, install bulb socket securely for watertightness.
EXL-132
< REMOVAL AND INSTALLATION >
[HALOGEN HEADLAMP]
LICENSE PLATE LAMP
LICENSE PLATE LAMP
Exploded View
INFOID:0000000011280803
Removal and Installation
INFOID:0000000011280804
REMOVAL
1. Release the license lamp finisher. Refer to
.
2. Remove the screw (A) (LH or RH) and pull license plate lamp (1)
(LH or RH) downward.
3. Disconnect the harness connector from the license plate lamp and remove.
INSTALLATION
Installation is in the reverse order of removal.
Bulb Replacement
INFOID:0000000011280805
WARNING:
Do not touch bulb with your hand while it is on or right after being turned off. Burning may result.
1.
License plate lamp bulb
2.
License plate lamp seal
3.
License plate lamp
4.
License plate lamp assembly
A.
License plate lamp bulb socket
ALLIA1421ZZ
ALLIA1416ZZ
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст