Nissan Rogue. Instruction — part 626
LICENSE PLATE LAMP
EXL-133
< REMOVAL AND INSTALLATION >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
CAUTION:
• Do not touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to pre-
vent damage to the bulb.
• Do not leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect
the performance of lamp. When replacing bulb, be sure to replace it with new one.
REMOVAL
1. Remove license plate lamp. Refer to
EXL-132, "Removal and Installation"
.
2. Rotate license plate lamp bulb socket counterclockwise and remove.
3. Remove license plate lamp bulb from bulb socket.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installing the bulb, install the bulb socket securely for watertightness.
EXL-134
< UNIT DISASSEMBLY AND ASSEMBLY >
[HALOGEN HEADLAMP]
FRONT COMBINATION LAMP
UNIT DISASSEMBLY AND ASSEMBLY
FRONT COMBINATION LAMP
Exploded View
INFOID:0000000011280806
Disassembly and Assembly
INFOID:0000000011280807
DISASSEMBLY
1. Remove front combination lamp. Refer to
EXL-119, "Removal and Installation"
.
2. Rotate the headlamp (low beam) bulb counterclockwise and remove.
3. Disconnect the harness connector from headlamp (low beam) bulb.
4. Remove plastic cover.
5. Rotate the headlamp (high beam) bulb counterclockwise and remove.
6. Disconnect the harness connector from headlamp (high beam) bulb.
7. Rotate the side marker lamp bulb socket counterclockwise and remove.
8. Remove the side marker lamp bulb from the bulb socket.
9. Rotate the turn signal lamp bulb socket counterclockwise and remove.
10. Remove the turn signal lamp bulb from the bulb socket.
ASSEMBLY
Assembly is in the reverse order of disassembly.
CAUTION:
After installing, be sure to install the bulb sockets securely to ensure watertightness.
ALLIA1594ZZ
1.
Front combination lamp
2. Side marker lamp bulb
3. Front combination lamp harness
4.
Front combination lamp
mounting bracket
5. Headlamp (low beam) socket cover 6. Headlamp (low beam) bulb
7.
Headlamp (high beam) bulb
8. Turn signal lamp bulb socket
9. Turn signal lamp bulb
REAR COMBINATION LAMP
EXL-135
< UNIT DISASSEMBLY AND ASSEMBLY >
[HALOGEN HEADLAMP]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
REAR COMBINATION LAMP
Exploded View
INFOID:0000000011280808
Disassembly and Assembly
INFOID:0000000011280809
DISASSEMBLY
1. Remove rear combination lamp. Refer to
EXL-127, "Removal and Installation"
2. Rotate the stop lamp bulb socket counterclockwise and remove.
3. Remove the stop lamp bulb from the bulb socket.
4. Rotate the tail lamp bulb socket counterclockwise and remove.
5. Remove the tail lamp bulb from the bulb socket.
6. Rotate the turn signal lamp bulb socket counterclockwise and remove.
7. Remove the turn signal lamp bulb from bulb socket.
ASSEMBLY
Assembly is in the reverse order of disassembly.
CAUTION:
After installing, be sure to install the bulb sockets securely to ensure watertightness.
AWLIA2341ZZ
1. Rear combination lamp
2.
Turn signal lamp bulb
3. Tail lamp bulb
4. Stop lamp bulb
A. Rear combination lamp harness
EXL-136
< SERVICE DATA AND SPECIFICATIONS (SDS)
[HALOGEN HEADLAMP]
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
Bulb Specifications
INFOID:0000000011280810
*: Always check with the Parts Department for the latest parts info.
Item
Wattage (W)*
Front combination lamp
High beam
65
Low beam
55
Turn signal lamp
28/8
Side marker lamp
5
Daytime running lamp
—
Front fog lamp (if equipped)
55
Side turn signal lamp
—
Rear combination lamp
Stop lamp
21
Tail lamp
5
Turn signal lamp
21
Back-up lamp
Tail lamp
5
Back-up lamp
16
License plate lamp
5
High-mounted stop lamp
—
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст