Nissan Frontier. Instruction — part 305
DLN-122
< UNIT DISASSEMBLY AND ASSEMBLY >
[TRANSFER: TX15B]
PLANETARY CARRIER
Check the internal gear teeth for damage, partial wear, dents or
other abnormality. If any is found, replace the internal gear with a
new one.
ASSEMBLY
1. Apply ATF to the new metal bushing, then install the new metal
bushing until it becomes Dimension (A) using Tool.
CAUTION:
Do not reuse metal bushing.
2. Apply ATF to the new needle bearing, then install the new nee-
dle bearing until it becomes Dimension (B) using Tool.
CAUTION:
Do not reuse needle bearing.
3. Install the carrier bearing to the sun gear using Tools.
4. Install the new snap ring to the sun gear assembly using suitable
tool.
CAUTION:
Do not reuse snap ring.
PDIA0157E
Tool number
: ST35300000 ( — )
Dimension (A)
: 7.7 - 8.3mm (0.303 - 0.327in)
SDIA3189E
Tool number
: ST33220000 ( — )
Dimension (B)
: 62.5 - 63.1mm (2.461 - 2.484in)
SDIA3190E
Tool number
(A): ST30720000 (J-25405)
(B): ST27863000 ( — )
PDIA0149E
SDIA2353E
PLANETARY CARRIER
DLN-123
< UNIT DISASSEMBLY AND ASSEMBLY >
[TRANSFER: TX15B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
5. Install the sun gear assembly to the planetary carrier assembly.
6. Install the new snap ring to the planetary carrier assembly.
CAUTION:
Do not reuse snap ring.
SDIA2794E
DLN-124
< UNIT DISASSEMBLY AND ASSEMBLY >
[TRANSFER: TX15B]
FRONT DRIVE SHAFT
FRONT DRIVE SHAFT
Disassembly and Assembly
INFOID:0000000009479721
DISASSEMBLY
1. Remove the front bearing using Tools.
2. Remove the rear bearing using Tools.
INSPECTION AFTER DISASSEMBLY
Front Drive Shaft
Check the items below. If necessary, replace them with new ones.
• Damage, peeling, dent, uneven wear and bending of the shaft.
• Excessive wear, damage and peeling of the gear.
Bearing
Check the bearing for damage and rough rotation. If necessary,
replace the bearing with a new one.
ASSEMBLY
Tool number
(A): ST35300000 ( — )
(B): ST30021000 (J-22912-01)
SDIA2106E
Tool number
(A): ST33710000 ( — )
(B): ST30021000 (J-22912-01)
PDIA0153E
PDIA0154E
MTF0041D
FRONT DRIVE SHAFT
DLN-125
< UNIT DISASSEMBLY AND ASSEMBLY >
[TRANSFER: TX15B]
C
E
F
G
H
I
J
K
L
M
A
B
DLN
N
O
P
1. Install the rear bearing using Tools.
2. Install the front bearing using Tools.
Tool number
(A): KV38100500 ( — )
(B): ST30901000 (J-26010-01)
PDIA0155E
Tool number
(A): KV38100500 ( — )
(B): ST30901000 (J-26010-01)
PDIA0156E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст