Nissan Juke F15. Instruction — part 743
EXL-192
< SYMPTOM DIAGNOSIS >
[HALOGEN TYPE]
EXTERIOR LIGHTING SYSTEM SYMPTOMS
With Daytime Running Light System
NOTE:
Perform the self-diagnosis with CONSULT before the symptom diagnosis. Perform the trouble diagnosis if any
DTC is detected.
Turn signal indicator lamp
does not blink
(Turn signal lamp is normal)
One side
Combination meter
—
Both sides
(Always)
• Turn indicator signal
• BCM
• Combination meter
• Combination meter
Data monitor “TURN IND”
• BCM (FLASHER)
Active test “FLASHER”
Both sides
(Only when activating
hazard warning lamp
with ignition switch OFF)
• Combination meter power supply/
ground circuit
• Combination meter
Combination meter
Power supply and ground circuit
Refer to
• Hazard warning lamp does not activate
(Turn signal is normal)
• Hazard warning lamp continues activating
• Hazard switch signal/ground cir-
cuit
• Hazard switch
• BCM
Hazard switch
Refer to
Symptom
Possible cause
Inspection item
Symptom
Possible cause
Inspection item
Headlamp (HI) is not turned
ON
One side
• Fuse
• Headlamp (HI) power supply/
ground circuit
• Daytime running light relay
• Headlamp (HI) bulb
• Headlamp assembly
- Harness
• IPDM E/R
Headlamp (HI) circuit
Refer to
Both sides
Symptom diagnosis
“BOTH SIDE HEADLAMPS (HI) ARE NOT TURNED ON”
Refer to
EXL-198, "Diagnosis Procedure"
High beam indicator lamp is not turned ON
[Headlamp (HI) is turned ON]
Combination meter
• Combination meter
Data monitor “HI-BEAM IND”
• BCM (HEAD LAMP)
Active test “HEAD LAMP”
Headlamp (LO) is not
turned ON
One side
• Fuse
• Headlamp (LO) power supply/
ground circuit
• Headlamp (LO) bulb
(Xenon bulb)
• Headlamp assembly
- HID control unit
- Xenon bulb socket
- Harness
• IPDM E/R
Headlamp (LO) circuit
Refer to
Both sides
Symptom diagnosis
“BOTH SIDE HEADLAMPS (LO) ARE NOT TURNED ON”
Refer to
EXL-199, "Diagnosis Procedure"
Parking lamp is not turned ON
• Parking lamp power supply/
ground circuit
• Front combination lamp
- LED (Parking lamp)
- Harness
• IPDM E/R
Parking lamp circuit
Refer to
Front side marker lamp is not turned ON
• Front side marker lamp power
supply/ground circuit
• Front side marker lamp bulb
• Front side marker lamp bulb sock-
et
Front side marker lamp circuit
Refer to
EXTERIOR LIGHTING SYSTEM SYMPTOMS
EXL-193
< SYMPTOM DIAGNOSIS >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Tail lamp is not turned ON
Stop lamp / Tail lamp
(Bulb side)
• Fuse
• Tail lamp power supply/ground
circuit
• Stop lamp / Tail lamp bulb
• Stop lamp / Tail lamp bulb socket/
harness
• IPDM E/R
Tail lamp (LED side)
• Fuse
• Tail lamp power supply/ground
circuit
• Rear combination lamp internal
circuit
- LED (Tail lamp)
• Tail lamp harness
• IPDM E/R
License plate lamp is not turned ON
• License plate lamp power supply/
ground circuit
• License plate lamp bulb
• License plate lamp bulb socket/
harness
License plate lamp circuit
Refer to
Parking lamp, license plate lamp, side marker lamp and
tail lamp are not turned ON
Symptom diagnosis
“PARKING, LICENSE PLATE, SIDE MARKER AND TAIL LAMPS ARE NOT
TURNED ON”
Refer to
EXL-200, "Diagnosis Procedure"
Position lamp indicator is not turned ON
(Parking lamp, license plate lamp, side marker lamp
and tail lamp are turned ON)
Combination meter
• Combination meter
Data monitor “LIGHT IND”
• BCM (HEAD LAMP)
Active test “TAIL LAMP”
Daytime running light is not turned ON [Headlamp (HI)
at approximately half illumination]
[Headlamp (HI) is turned ON]
• Fuse
• Daytime running light relay power
supply/control signal circuit
• Daytime running light relay
• IPDM E/R
• BCM
• ECM
• Combination meter
• Daytime running light relay circuit
Refer to
• BCM (HEAD LAMP)
Data monitor “ENGINE STATE”
• Combination meter
Data monitor “PKB SW”
Front fog lamp is not turned
ON
One side
• Front fog lamp power supply/
ground circuit
• Front fog lamp bulb
• IPDM E/R
Front fog lamp circuit
Refer to
Both sides
Symptom diagnosis
“BOTH SIDE FRONT FOG LAMPS ARE NOT TURNED ON”
Refer to
EXL-201, "Diagnosis Procedure"
Symptom
Possible cause
Inspection item
EXL-194
< SYMPTOM DIAGNOSIS >
[HALOGEN TYPE]
EXTERIOR LIGHTING SYSTEM SYMPTOMS
NISMO MODELS
NOTE:
Perform the self-diagnosis with CONSULT before the symptom diagnosis. Perform the trouble diagnosis if any
DTC is detected.
Turn signal lamp does not
blink
Indicator lamp is normal
(Applicable side per-
forms high flasher activa-
tion)
• Front turn signal lamp
- Front turn signal lamp power sup-
ply/ground circuit
- Front turn signal lamp bulb
- Front turn signal lamp bulb socket
- BCM
• Side turn signal lamp
- Side turn signal lamp power sup-
ply/ground circuit
- Side turn signal lamp
- BCM
• Rear turn signal lamp
- Rear turn signal lamp power sup-
ply/ground circuit
- Rear turn signal lamp bulb
- Rear turn signal lamp bulb socket/
harness
- BCM
Turn signal lamp circuit
Refer to
Indicator lamp is included
• Combination switch input/output
signal circuit
• Combination switch
• BCM
Combination switch
Refer to
.
Turn signal indicator lamp
does not blink
(Turn signal lamp is normal)
One side
Combination meter
—
Both sides
(Always)
• Turn indicator signal
• BCM
• Combination meter
• Combination meter
Data monitor “TURN IND”
• BCM (FLASHER)
Active test “FLASHER”
Both sides
(Only when activating
hazard warning lamp
with ignition switch OFF)
• Combination meter power supply/
ground circuit
• Combination meter
Combination meter
Power supply and ground circuit
Refer to
• Hazard warning lamp does not activate
(Turn signal is normal)
• Hazard warning lamp continues activating
• Hazard switch signal/ground cir-
cuit
• Hazard switch
• BCM
Hazard switch
Refer to
Symptom
Possible cause
Inspection item
Symptom
Possible cause
Inspection item
Headlamp (HI) is not turned
ON
One side
• Fuse
• Headlamp (HI) power supply/
ground circuit
• Headlamp (HI) bulb
• Headlamp assembly
- Harness
• IPDM E/R
Headlamp (HI) circuit
Refer to
Both sides
Symptom diagnosis
“BOTH SIDE HEADLAMPS (HI) ARE NOT TURNED ON”
Refer to
EXL-198, "Diagnosis Procedure"
High beam indicator lamp is not turned ON
[Headlamp (HI) is turned ON]
Combination meter
• Combination meter
Data monitor “HI-BEAM IND”
• BCM (HEAD LAMP)
Active test “HEAD LAMP”
EXTERIOR LIGHTING SYSTEM SYMPTOMS
EXL-195
< SYMPTOM DIAGNOSIS >
[HALOGEN TYPE]
C
D
E
F
G
H
I
J
K
M
A
B
EXL
N
O
P
Headlamp (LO) is not
turned ON
One side
• Fuse
• Headlamp (LO) power supply/
ground circuit
• Headlamp (LO) bulb
(Xenon bulb)
• Headlamp assembly
- HID control unit
- Xenon bulb socket
- Harness
• IPDM E/R
Headlamp (LO) circuit
Refer to
Both sides
Symptom diagnosis
“BOTH SIDE HEADLAMPS (LO) ARE NOT TURNED ON”
Refer to
EXL-199, "Diagnosis Procedure"
Parking lamp is not turned ON
• Parking lamp power supply/
ground circuit
• Front combination lamp
- LED (Parking lamp)
- Harness
• IPDM E/R
Front side marker lamp is not turned ON
• Front side marker lamp power
supply/ground circuit
• Front side marker lamp bulb
• Front side marker lamp bulb sock-
et
Front side marker lamp circuit
Refer to
Tail lamp is not turned ON
Stop lamp / Tail lamp
(Bulb side)
• Fuse
• Tail lamp power supply/ground
circuit
• Stop lamp / Tail lamp bulb
• Stop lamp / Tail lamp bulb socket/
harness
• IPDM E/R
Tail lamp (LED side)
• Fuse
• Tail lamp power supply/ground
circuit
• Rear combination lamp internal
circuit
- LED (Tail lamp)
• Tail lamp harness
• IPDM E/R
License plate lamp is not turned ON
• License plate lamp power supply/
ground circuit
• License plate lamp bulb
• License plate lamp bulb socket/
harness
License plate lamp circuit
Refer to
Parking lamp, license plate lamp, side marker lamp and
tail lamp are not turned ON
Symptom diagnosis
“PARKING, LICENSE PLATE, SIDE MARKER AND TAIL LAMPS ARE NOT
TURNED ON”
Refer to
EXL-200, "Diagnosis Procedure"
Position lamp indicator is not turned ON
(Parking lamp, license plate lamp, side marker lamp
and tail lamp are turned ON)
Combination meter
• Combination meter
Data monitor “LIGHT IND”
• BCM (HEAD LAMP)
Active test “TAIL LAMP”
Daytime running light is not turned ON
• Fuse
• Daytime running light power sup-
ply/ground circuit
• Daytime running light
• IPDM E/R
• BCM
• ECM
• Combination meter
• Daytime running light circuit
Refer to
• BCM (HEAD LAMP)
Data monitor “ENGINE STATE”
• Combination meter
Data monitor “PKB SW”
Symptom
Possible cause
Inspection item
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст