Nissan Juke F15. Instruction — part 1305
TM-410
< ECU DIAGNOSIS INFORMATION >
[CVT: RE0F10D]
TCM
P0711
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine start:
Temp.
≥ 10°C (50°F)
• Selector shock is large
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine start:
−35°C (−31°F) ≤ Temp. < 10°C (50°F)
• Selector shock is large
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine star:
Temp. <
−35°C (−31°F)
P0712
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine start:
Temp.
≥ 10°C (50°F)
• Selector shock is large
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine start:
−35°C (−31°F) ≤ Temp. < 10°C (50°F)
• Selector shock is large
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine star:
Temp. <
−35°C (−31°F)
P0713
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine start:
Temp.
≥ 10°C (50°F)
• Selector shock is large
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine start:
−35°C (−31°F) ≤ Temp. < 10°C (50°F)
• Selector shock is large
• Start is slow
• Acceleration is slow
Engine coolant temperature when engine star:
Temp. <
−35°C (−31°F)
P0715
• Start is slow
• Acceleration is slow
• Lock-up is not performed
• Instruction mode is not activated
—
P0717
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0740
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0743
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0744
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0746
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0776
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
• Vehicle speed is not increased
When a malfunction occurs on the low oil pressure side
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
When a malfunction occurs on the high oil pressure side
P0778
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
DTC
Vehicle behavior
Conditions of vehicle
TCM
TM-411
< ECU DIAGNOSIS INFORMATION >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
P0779
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
P0826
Instruction mode is not activated
P0841
Not changed from normal driving
P0847
Not changed from normal driving
—
P0848
Not changed from normal driving
—
P084C
Not changed from normal driving
P084D
Not changed from normal driving
P0863
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0890
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
• Vehicle speed is not increased
P0962
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0963
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0965
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
When a malfunction occurs on the low oil pressure side
• Selector shock is large
• Lock-up is not performed
When a malfunction occurs on the high oil pressure side
P0966
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P0967
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
P17F0
Not changed from normal driving
—
P17F1
Not changed from normal driving
—
P17F2
Not changed from normal driving
—
P2765
• Start is slow
• Acceleration is slow
• Lock-up is not performed
• Instruction mode is not activated
—
P2813
• Selector shock is large
• Start is slow
• Acceleration is slow
• Vehicle speed is not increased
When a malfunction occurs on the low oil pressure side
Selector shock is large
When a malfunction occurs on the high oil pressure side
P2814
Selector shock is large
—
P2815
Selector shock is large
—
DTC
Vehicle behavior
Conditions of vehicle
TM-412
< ECU DIAGNOSIS INFORMATION >
[CVT: RE0F10D]
TCM
Protection Control
INFOID:0000000012201116
The TCM becomes the protection control status temporarily to protect the safety when the safety of TCM and
transmission is lost. It automatically returns to the normal status if the safety is secured.
The TCM has the following protection control.
CONTROL FOR WHEEL SPIN
TORQUE IS REDUCED WHEN DRIVING WITH THE REVERSE GEAR
CONTROL WHEN FLUID TEMPERATURE IS HIGH
REVERSE PROHIBIT CONTROL
U0073
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
U0100
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
U0102
Not changed from normal driving
—
U0140
Not changed from normal driving
—
U0141
Not changed from normal driving
—
U0155
Not changed from normal driving
—
U0164
Not changed from normal driving
—
U0300
• Selector shock is large
• Start is slow
• Acceleration is slow
• Lock-up is not performed
—
U1000
Not changed from normal driving
—
U1117
Not changed from normal driving
—
DTC
Vehicle behavior
Conditions of vehicle
Control
When a wheel spin is detected, the engine output and gear ratio are limited and the line pressure is increased.
Limits engine output when a wheel spin occurs in any of right and left drive wheels.
Vehicle behavior in
control
If the accelerator is kept depressing during wheel spin, the engine revolution and vehicle speed are limited to
a certain degree.
Normal return condi-
tion
Wheel spin convergence returns the control to the normal control.
Control
Engine output is controlled according to a vehicle speed while reversing the vehicle.
Vehicle behavior in
control
Power performance may be lowered while reversing the vehicle.
Normal return condi-
tion
Torque returns to normal by positioning the selector lever in a range other than “R” position.
Control
When the CVT fluid temperature is high, the gear shift permission maximum revolution and the maximum
torque are reduced than usual to prevent increase of the oil temperature.
Vehicle behavior in
control
Power performance may be lowered, compared to normal control.
Normal return condi-
tion
The control returns to the normal control when CVT fluid temperature is lowered.
TCM
TM-413
< ECU DIAGNOSIS INFORMATION >
[CVT: RE0F10D]
C
E
F
G
H
I
J
K
L
M
A
B
TM
N
O
P
DTC Inspection Priority Chart
INFOID:0000000012201117
If multiple malfunction codes are detected at the same time, check each code according to the DTC check pri-
ority list below.
Control
The reverse brake is controlled to avoid becoming engaged when the selector lever is set in “R” position while
driving in forward direction at more than the specified speed.
Vehicle behavior in
control
If the selector lever is put at “R” position when driving with the forward gear, the gear becomes neutral, not
reverse.
Normal return condi-
tion
The control returns to normal control when the vehicle is driven at low speeds. (The reverse brake becomes
engaged.)
Priority
DTC
Items
(CONSULT screen terms)
Reference
1
P0863
CONTROL UNIT (CAN)
U0073
COMM BUS A OFF
U0100
LOST COMM (ECM A)
U0102
LOST COMM (TRANSFER)
U0140
LOST COMM (BCM)
U0141
LOST COMM (BCM A)
U0155
LOST COMM (IPC)
U0164
LOST COMM (HVAC)
U0300
CAN COMM DATA
U1000
CAN COMM CIRCUIT
U1117
LOST COMM (ABS)
2
P0740
TORQUE CONVERTER
P0743
TORQUE CONVERTER
P0778
PC SOLENOID B
P0779
PC SOLENOID B
P0962
PC SOLENOID A
P0963
PC SOLENOID A
P0966
PC SOLENOID B
P0967
PC SOLENOID B
P2814
SELECT SOLENOID
P2815
SELECT SOLENOID
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст