Nissan Juke F15. Instruction — part 1018
PCS-16
< SYSTEM DESCRIPTION >
[IPDM E/R]
DIAGNOSIS SYSTEM (IPDM E/R)
EXTERNAL LAMPS
Off
OFF
TAIL
Operates the tail lamp relay.
Lo
Operates the headlamp low relay.
Hi
Operates the headlamp low relay and ON/OFF the headlamp high relay at 1 second
intervals.
Fog
Operates the front fog lamp relay.
Test item
Operation
Description
PCS
IPDM E/R
PCS-17
< ECU DIAGNOSIS INFORMATION >
[IPDM E/R]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
ECU DIAGNOSIS INFORMATION
IPDM E/R
Reference Value
INFOID:0000000012197160
VALUES ON THE DIAGNOSIS TOOL
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.
Monitor Item
Condition
Value/Status
RAD FAN REQ
Engine idle speed
Changes depending on engine
coolant temperature, air conditioner
operation status, vehicle speed,
etc.
0 – 100%
AC COMP REQ
Engine running
A/C switch OFF
Off
A/C switch ON
(Compressor is operating)
On
TAIL&CLR REQ
Lighting switch OFF
Off
• Lighting switch 1ST, 2ND or AUTO (Light is illuminated)
• Daytime running light system operated
On
HL LO REQ
Lighting switch OFF
Off
Lighting switch 2ND or AUTO (Light is illuminated)
On
HL HI REQ
Lighting switch 2ND or AUTO (light
is illuminated)
Lighting switch other than HI and
PASS
Off
Lighting switch HI or PASS
On
FR FOG REQ
Lighting switch 1ST, 2ND or
AUTO (Light is illuminated)
Front fog lamp switch OFF
Off
Front fog lamp switch ON
On
FR WIP REQ
Ignition switch ON
Front wiper switch OFF
Stop
Front wiper switch INT
1LOW
Front wiper switch LO
Low
Front wiper switch HI
Hi
WIP AUTO STOP
Ignition switch ON
Front wiper stop position
STOP P
Any position other than front wiper
stop position
ACT P
WIP PROT
Ignition switch ON
Front wiper operates normally.
Off
Front wiper stops at fail-safe opera-
tion.
BLOCK
IGN RLY1 -REQ
Ignition switch OFF or ACC
Off
Ignition switch ON
On
IGN RLY
Ignition switch OFF or ACC
Off
Ignition switch ON
On
PUSH SW
Release the push-button ignition switch
Off
Press the push-button ignition switch
On
INTER/NP SW
Ignition switch ON (CVT models)
Selector lever in any position other
than P or N
Off
Selector lever in P or N position
On
Ignition switch OFF or ACC (M/T models)
Off
Ignition switch ON (M/T models)
On
PCS-18
< ECU DIAGNOSIS INFORMATION >
[IPDM E/R]
IPDM E/R
ST RLY CONT
Ignition switch ON
Off
At engine cranking
On
IHBT RLY -REQ
Ignition switch ON
Off
At engine cranking
On
ST/INHI RLY
Ignition switch ON
Off
At engine cranking
INHI ON
→ ST ON
The status of starter relay or starter control relay cannot be recognized by
the battery voltage malfunction, etc. when the starter relay is ON and the
starter control relay is OFF.
UNKWN
DETENT SW
Ignition switch ON
• Press the selector button with se-
lector lever in P position.
• Selector lever in any position oth-
er than P.
Off
Release the selector button with selector lever in P position.
NOTE:
Status fixed to On for M/T models
On
S/L RLY -REQ
NOTE:
This item is indicated, but not monitored.
Off
S/L STATE
NOTE:
This item is indicated, but not monitored.
UNLOCK
DTRL REQ
NOTE:
This item is monitored only
for the except for NISMO
models.
Daytime running light system is not operated with ignition switch OFF
Off
Any of the condition below
• Daytime running light system is operated
• Light switch 2ND or AUTO (light is illuminated)
On
OIL P SW
NOTE:
This item is indicated, but not monitored.
Open
HOOD SW
NOTE:
This item is indicated, but not monitored.
Off
HL WASHER REQ
NOTE:
This item is indicated, but not monitored.
Off
THFT HRN REQ
Not operation
Off
Theft warning alarm is activated
On
HORN CHIRP
Not operation
Off
Horn reminder is activated
On
Monitor Item
Condition
Value/Status
PCS
IPDM E/R
PCS-19
< ECU DIAGNOSIS INFORMATION >
[IPDM E/R]
C
D
E
F
G
H
I
J
K
L
B
A
O
P
N
TERMINAL LAYOUT
PHYSICAL VALUES
JPMIA1423ZZ
Terminal NO.
(Wire color)
Description
Condition
Value
(Approx.)
Signal name
Input/
Output
+
–
1
(R)
Ground
Battery power supply
Input
Ignition switch OFF
6 – 16 V
2
(G)
Ground
Battery power supply
Input
Ignition switch OFF
6 – 16 V
3
(R)
Ground
Starter motor
Output
Other than engine cranking
0 – 1 V
At engine cranking
6 – 16 V
4
(P)
Ground
Battery power supply
Input
Ignition switch OFF
9 – 16 V
9
(B/Y)
Ground
Ground
—
Ignition switch ON
0 – 1 V
14
(R)
Ground
Rear window defogger
Output
Ignition
switch
ON
Rear window defogger switch
OFF
0 – 1 V
Rear window defogger switch
ON
9 – 16 V
18
(GR)
Ground
Ground
—
Ignition switch ON
0 – 1 V
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст