Harley Davidson 2018 softail models. Service manual — page 48

    3
    BK
    Ground
    4
    -
    N/C
    Figure 18. Stop Tail Lamp [40-2]
    Table 19. Stator [47]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    BK
    Stator
    2
    BK
    Stator
    3
    BK
    Stator
    Figure 19. Stator [47]
    Table 20. Fuse Block [64]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    R
    Battery
    2
    R/O
    Battery fuse
    3
    R
    Battery
    4
    R
    Tender fuse
    A
    R
    Battery/main fuse
    B
    R
    Battery/main fuse
    Figure 20. Fuse Block [64]
    Table 21. VSS [65]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    A
    R/W
    5 Volt sensor power
    B
    LGN/Y
    VSS input
    C
    BK/GN
    Sensor ground
    Figure 21. VSS [65]
    Table 22. Auxiliary/Fog Lamps [73L]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    BK
    Ground
    2
    BE/BK
    Front running/fog light power
    Figure 22. Auxiliary/Fog Lamps [73L]
    Table 23. Left Auxiliary/Fog Lamps [73L-2]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    A
    BE/BK
    Front running/fog light power
    B
    BK
    Ground
    Figure 23. Left Auxiliary/Fog Lamps [73L-2]
    Table 24. Auxiliary/Fog Lamps [73R]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    BK
    Ground
    2
    BE/BK
    Front running/fog light power
    Figure 24. Auxiliary/Fog Lamps [73R]
    Table 25. Right Auxiliary/Fog Lamp [73R-2]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    A
    BE/BK
    Front running/fog light power
    B
    BK
    Ground
    Figure 25. Right Auxiliary/Fog Lamp [73R-2]
    Table 26. Voltage Regulator [77]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    P
    R
    Battery
    N
    BK
    Ground
    Figure 26. Voltage Regulator [77]
    Table 27. ECM [78-1]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    GY/BE
    Rear ignition coil
    2
    GN/BE
    Front ignition coil
    3
    BK/O
    Front HO2S heater ground
    4
    LGN/Y
    VSS input
    5
    GN/Y
    Front fuel injector
    6
    GY/Y
    Rear fuel injector
    7
    GY
    MAP input
    8
    LGN/GY
    JSS signal
    9
    -
    N/C
    10
    BK/GN
    Ground
    11
    -
    N/C
    12
    Y/W
    Fuel level
    13
    W/BK
    CAN low
    14
    W/R
    CAN high
    15
    BK/PK
    Rear HO2S heater ground
    16
    R
    CKP sensor high
    17
    GN/BN
    Front HO2S
    18
    BK
    CKP sensor low
    Figure 27. ECM [78-1]
    Table 28. ECM [78-2]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    -
    N/C
    2
    BN/W
    Front knock sensor +
    3
    -
    N/C
    4
    LGN/R
    ACR enable
    5
    LGN/BK
    Purge solenoid
    6
    GN/GY
    IAT
    7
    BK/W
    5 Volt sensor ground
    8
    GN
    ET sensor
    9
    R/W
    5 Volt sensor power
    10
    BK/GN
    Ground
    11
    LGN/W
    Front knock sensor -
    12
    BN/V
    Rear knock sensor +
    13
    LGN/V
    Rear knock sensor -
    14
    -
    N/C
    15
    GN/V
    TPS 2
    16
    R/GN
    System power
    17
    GY/BN
    Rear HO2S
    18
    R/O
    Battery fuse
    Figure 28. ECM [78-2]
    Table 29. ECM [78-3] (BN)
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    -
    N/C
    2
    GN/V
    TPS1
    3
    -
    N/C
    4
    -
    N/C
    5
    -
    N/C
    6
    -
    N/C
    7
    -
    N/C
    8
    GN/O
    TCA high
    9
    GY/O
    TCA low
    10
    BK/GN
    Ground
    11
    -
    N/C
    12
    W/O
    Oil pressure
    13
    GN/W
    TGS 1
    14
    GY/W
    TGS 2
    15
    -
    N/C
    16
    -
    N/C
    17
    BK/GY
    5V sensor ground 2
    18
    R/GY
    5V sensor power 2
    Figure 29. ECM [78-3]
    Table 30. CKP Sensor [79]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    R
    CKP sensor high
    2
    BK
    CKP sensor low
    Figure 30. CKP Sensor [79]
    Table 31. TMAP [80]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    GY
    MAP input
    2
    R/GY
    5V sensor power 2
    3
    GN/GY
    IAT
    4
    BK/GY
    5V sensor ground 2
    Figure 31. TMAP [80]
    Table 32. Ignition Coil [83]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    A
    GY/BE
    Rear ignition coil
    B
    R/GN
    System power
    C
    GN/BE
    Front ignition coil
    Figure 32. Ignition Coil [83]
    Table 33. Front Fuel Injector [84]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    A
    R/GN
    System power
    B
    GN/Y
    Rear fuel injector
    Figure 33. Front Fuel Injector [84]
    Table 34. Rear Fuel Injector [85]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    A
    R/GN
    System power
    B
    GY/Y
    Front fuel injector
    Figure 34. Rear Fuel Injector [85]
    Table 35. ET Sensor [90]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    GN
    ET sensor
    2
    BK/W
    5V sensor ground
    Figure 35. ET Sensor [90]
    Table 36. DLC [91]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    W/R
    CAN high
    2
    BK
    Ground
    3
    W/BK
    CAN low
    4
    -
    N/C
    5
    R/Y
    Accessory power
    6
    -
    N/C
    Figure 36. DLC [91]
    Table 37. Stop Tail Lamp [94]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    -
    N/C
    2
    BE/BN
    Right rear turn signal
    3
    BE
    Running lights power
    4
    BE/R
    Brake lamp power
    5
    BE/V
    Left rear turn signal
    6
    BK
    Ground
    Figure 37. Stop Tail Lamp [94]
    Table 38. Purge Solenoid [95]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    A
    R/GN
    System power
    B
    LGN/BK
    Purge solenoid
    Figure 38. Purge Solenoid [95]
    Table 39. Tachometer [108]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    -
    N/C
    2
    W/R
    CAN +
    3
    -
    N/C
    4
    -
    N/C
    5
    R/O
    Battery power
    6
    -
    N/C
    7
    BK/GN
    Ground
    8
    W/BK
    CAN -
    9
    -
    N/C
    10
    -
    N/C
    11
    -
    N/C
    12
    -
    N/C
    Figure 39. Tachometer [108] Table
    40. Oil Pressure Switch [120]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    BK/W
    5V sensor ground
    2
    R/W
    5V sensor power
    3
    W/O
    Oil pressure
    Figure 40. Oil Pressure Switch [120] Table
    41. Rear Brake Switch [121-1] [121-2]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    BE/GN
    Rear brake switch
    1
    BK
    Ground
    Figure 41. Rear Brake Switch [121-1] [121-2]
    Table 42. Horn [122-1] [122-2]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    R/V
    Horn power
    1
    BK
    Ground
    Figure 42. Horn [122-1] [122-2]
    Table 43. Starter Solenoid [128]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    R/BK
    Starter solenoid power
    Figure 43. Starter Solenoid [128] Table
    44. Neutral Switch [131-1] [131-2]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    W
    Neutral switch input
    1
    BK
    Ground
    Figure 44. Neutral Switch [131-1] [131-2]
    Table 45. Jiffy Stand [133]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    R/W
    5 Volt sensor power
    2
    LGN/GY
    JSS signal
    3
    BK/GN
    Sensor ground
    Figure 45. Jiffy Stand [133]
    Table 46. HO2S Rear [137]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    V/GN
    Fuse system power
    2
    BK/PK
    Rear HO2S heater ground
    3
    GY/BN
    Rear HO2S
    4
    BK/W
    5 Volt sensor ground
    Figure 46. HO2S Rear [137]
    Table 47. HO2S Front [138]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    V/GN
    Fuse system power
    2
    BK/O
    Front HO2S heater ground
    3
    GN/BN
    Front HO2S
    4
    BK/W
    5 Volt sensor ground
    Figure 47. HO2S Front [138]
    Table 48. Fuel Pump [141]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    R/BN
    Fuel pump power
    2
    W/Y
    Fuel level sender
    3
    BK/W
    5V sensor ground
    4
    BK
    Ground
    Figure 48. Fuel Pump [141]
    Table 49. Security Siren (Optional) [142]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    R/O
    Power
    2
    W/GN
    Security siren
    3
    BK
    Ground
    Figure 49. Security Siren (Optional) [142]
    Table 50. Engine Harness [145]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    R/O
    Battery power
    2
    R/GN
    System power
    3
    W/R
    CAN +
    4
    W/BK
    CAN -
    5
    BK/GN
    Ground
    Figure 50. Engine Harness [145]
    Table 51. ABS [166]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    BK/GN
    Ground
    2
    W/R
    CAN high
    3
    O/BK
    Front WSS low
    4
    BE/BK
    Switched aux lamp PWR
    5
    -
    N/C
    6
    -
    N/C
    7
    -
    N/C
    8
    -
    N/C
    9
    R
    Battery power
    10
    BK
    Ground
    11
    W/BK
    CAN low
    12
    O/BE
    Front WSS high
    13
    O/PK
    Rear WSS high
    14
    O/BN
    Rear WSS low
    15
    -
    N/C
    16
    -
    N/C
    17
    -
    N/C
    18
    R
    Battery power
    Figure 51. ABS [166]
    Table 52. Front WSS [167]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    O/BE
    Front WSS high
    2
    O/BK
    Front WSS low
    Figure 52. Front WSS [167]
    Table 53. Rear WSS [168]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    O/PK
    Rear WSS high
    2
    O/BN
    Rear WSS low
    Figure 53. Rear WSS [168]
    Table 54. ACR [203]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    R/GN
    System power
    2
    LGN/R
    ACR enable
    Figure 54. ACR [203]
    Table 55. TGS [204A]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    R/W
    5V sensor power 1
    2
    GN/W
    TGS 1
    3
    BK/W
    5V sensor ground 1
    4
    R/GY
    5V sensor power 2
    5
    GY/W
    TGS 2
    6
    BK/GY
    5V sensor ground 2
    Figure 55. TGS [204]
    Table 56. TGS [204B]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    R
    5V sensor power 1
    2
    W
    TGS 1
    3
    BK
    5V sensor ground 1
    4
    R
    5V sensor power 2
    5
    W
    TGS 2
    6
    BK
    5V sensor ground 2
    Figure 56. TGS [204B]
    Table 57. Security Antenna [209]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    R
    Security antenna high
    2
    BK
    Security antenna low
    Figure 57. Security Antenna [209]
    Table 58. TCA [211]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    A
    GY/O
    ETC low
    B
    BK/W
    5V sensor ground 1
    C
    GN/V
    TPS 1
    D
    R/W
    5V sensor power 1
    E
    GY/V
    TPS 2
    F
    GN/O
    ETC high
    Figure 58. TCA [211]
    Table 59. BCM [242]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    A1
    -
    N/C
    A2
    R
    Security antenna high
    A3
    -
    N/C
    A4
    BK
    Security RF antenna
    B1
    -
    N/C
    B2
    BK
    Security antenna low
    B3
    -
    N/C
    B4
    -
    N/C
    C1
    -
    N/C
    C2
    -
    N/C
    C3
    -
    N/C
    C4
    W/GY
    Engine stop switch input
    D1
    -
    N/C
    D2
    W/R
    CAN high
    D3
    W
    Neutral switch input
    D4
    -
    N/C
    E1
    -
    N/C
    E2
    W/BK
    CAN low
    E3
    W/O
    Oil pressure switch input
    E4
    R/V
    Horn power
    F1
    -
    N/C
    F2
    -
    N/C
    F3
    BE/GN
    Brake switch input
    F4
    R/BN
    Fuel pump power
    G1
    -
    N/C
    G2
    O/W
    ABS wake
    G3
    -
    N/C
    G4
    BK/GN
    Sensor ground
    H1
    -
    N/C
    H2
    W/GN
    Security siren
    H3
    -
    N/C
    H4
    -
    N/C
    J1
    -
    N/C
    J2
    BE/O
    Right front turn signal
    J3
    BE
    Running lights
    J4
    BE/PK
    Left front turn signal
    K1
    -
    N/C
    K2
    BE/BN
    Right rear turn signal
    K3
    BE/R
    Brake lamp power
    K4
    BE/V
    Left rear turn signal
    L1
    -
    N/C
    L2
    R/BK
    Starter solenoid power
    L3
    R/GN
    System power
    L4
    BE/BK
    Front running/Fog light power
    M1
    -
    N/C
    M2
    R/Y
    Accessory power
    M3
    BE/W
    High beam power
    M4
    BE/Y
    Low beam power
    Figure 59. BCM [242]
    Table 60. BCM Power [259]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    R
    Battery power
    Figure 60. BCM Power [259]
    Table 61. USB Interconnect [264]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    R/Y
    Accessory power
    2
    BK
    Ground
    Figure 61. USB Interconnect [264]
    Table 62. Battery Tender [281]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    R
    Battery power
    2
    BK
    Ground
    Figure 62. Battery Tender [281]
    Table 63. Front Knock Sensor [315]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    LGN/W
    Front knock sensor LO
    2
    BN/W
    Front knock sensor HI
    Figure 63. Knock Sensor
    Table 64. Rear Knock Sensor [316]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    LGN/V
    Rear knock sensor LO
    2
    BN/V
    Rear knock sensor HI
    Figure 64. Knock Sensor
    Table 65. Termination Resister [319]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    A
    W/R
    CAN High
    B
    W/BK
    CAN Low
    Figure 65. Termination Resister [319]
    Table 66. P&A Accessory [325]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    R/Y
    Accessory power
    2
    BK
    Ground
    3
    -
    N/C
    Figure 66. P&A Accessory [325]
    Table 67. Backbone Harness Interconnect [327A]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    R/BN
    Fuel pump power
    2
    R/V
    Horn power
    3
    R/Y
    Accessory power
    4
    R/O
    Battery fuse
    5
    BE
    Position lamp
    6
    BE/BK
    AUX/fog lamps
    7
    BK/GN
    Ground
    8
    BK
    Ground
    9
    -
    N/C
    10
    BE/Y
    Low beam
    11
    BE/W
    High beam
    12
    W/R
    CAN +
    13
    W/BK
    CAN -
    14
    -
    N/C
    15
    -
    N/C
    16
    O/BE
    Front WSS +
    17
    O/BK
    Front WSS -
    18
    BE/O
    Front right turn
    19
    BE/PK
    Front left turn
    20
    W/GY
    Run/stop switch
    Figure 67. Backbone Harness Interconnect [327A]
    Figure 68. Backbone Harness Interconnect [327B]
    Table 68. Engine Harness Interconnect [328]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    R/W
    5V sensor power 1
    2
    GN/W
    TGS 1
    3
    BK/W
    5V sensor ground 1
    4
    R/GY
    5V sensor power 2
    5
    GY/W
    TGS 2
    6
    BK/GY
    5V sensor ground 2
    7
    GN
    Engine temperature
    8
    Y/W
    Fuel level
    Figure 69. Engine Harness Interconnect [328]
    Table 69. USB Caddy Interconnect [329]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    BK
    Ground
    2
    BK/W
    5V sensor ground 1
    3
    GN
    Engine temperature
    4
    R/Y
    Accessory power
    5
    R/V
    Horn power
    6
    BK/W
    5V sensor ground 1
    7
    Y/W
    Fuel level
    8
    R/BN
    Fuel pump power
    Figure 70. USB Caddy Interconnect [329]
    Table 70. Light Bar Interconnect [331]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    1
    BE/BN
    Right rear turn signal
    2
    BK
    Ground
    3
    BE/V
    Left rear turn signal
    4
    BK
    Ground
    Figure 71. Light Bar Interconnect [331]
    Table 71. Fuse Block [332]
    TERMINAL
    WIRE COLOR
    CIRCUIT DESCRIPTION
    A
    R/GN
    System power
    B
    V/GN
    Fused system power
    Figure 72. Fuse Block [332]
    Some components and connectors are not easily located on the motorcycle. The following figures show locations for these
    components and connectors. The figures are generally ordered from front to back around the motorcycle.
    1
    Headlamp
    2
    IM
    3
    Under seat
    4
    Tail lamp
    5
    Front of rear tire
    6
    Side covers
    7
    Engine
    8
    Front of engine
    9
    USB caddy
    Figure 1. Left Side: Typical
    1
    Right AUX/fog lamp [73R-2]
    2
    Headlamp [38-2]
    3
    Left AUX/fog lamp [73L-2]
    4
    Front left turn [31L-2]
    5
    Left AUX/fog lamp [73L]
    6
    Horn [122-1]
    7
    Horn [122-2]
    8
    Right AUX/fog lamp [73R]
    9
    Front right turn [31R-2]
    Figure 2. Headlamp: FLSTC, FLSTN
    1
    IM [39]
    Figure 3. IM: FXBB, FXBR
    1
    IM [39]
    Figure 4. IM: FLFB, FLSB, FXFB
    1
    IM [39]
    2
    Indicator lamps
    Figure 5. IM: FLDE, FLHC/S, FLSL
    1
    IM [39]
    2
    Tachometer [108]
    Figure 6. IM: FXLR
    1
    Headlamp security siren [38]
    2
    Console [20]
    3
    TGS [204]
    4
    Right front lighting [31R]
    5
    Front WSS [167]
    6
    Left front lighting [31L]
    7
    USB caddy interconnect [329]
    8
    LHCM [24]
    9
    RHCM [22-1]
    10
    RHCM [22-2]
    Figure 7. USB Caddy
    1
    CKP [79]
    2
    Voltage regulator [77]
    3
    Oil pressure sensor [120]
    4
    Front HO2S [138]
    5
    Rear brake switch [121-1]
    6
    Rear brake switch [121-2]
    7
    JSS [133]
    8
    Stator [47]
    Figure 8. Front of Engine: Typical
    1
    Battery tender [281]
    2
    DLC [91]
    3
    Termination resistor [319]
    4
    P&A accessory [325]
    5
    Fuse holder [332]
    6
    Fuse block [64]
    7
    ECM [78-3]
    8
    ECM [78-2]
    9
    ECM [78-1] (behind sub caddy)
    Figure 9. Behind Left Side Cover
    1
    USB caddy interconnect [329]
    2
    USB [264]
    3
    Fuel pump [141]
    4
    ET sensor [90]
    Figure 10. Under Fuel Tank Left Side
    1
    Engine harness [145]
    2
    ABS EHCU [166]
    3
    Rear HO2S [137]
    4
    Starter solenoid [128]
    5
    Rear WSS [168]
    Figure 11. Behind Right Side Cover
    1
    Neutral [131-1]
    2
    Neutral [131-2]
    3
    VSS [65]
    4
    Transmission GND
    Figure 12. Top of Transmission
    1
    Front knock sensor [315]
    2
    Front ACR [203F]
    3
    Rear knock sensor [316]
    4
    Rear ACR [203R]
    5
    Rear injector [85]
    6
    TMAP [80]
    7
    Ignition coil [83]
    8
    Throttle control [211]
    9
    Front injector [84]
    Figure 13. Engine
    1
    Purge solenoid [95]
    2
    GND 2A
    3
    GND 1
    4
    GND 2
    5
    Backbone harness interconnect [327]
    6
    Engine harness interconnect [328]
    7
    Engine harness [145]
    8
    Security antenna [209]
    9
    Left rear lighting [19]
    10
    Right rear lighting [18]
    11
    Tail lamp [40]
    Figure 14. Under Seat
    1
    Security siren [142]
    2
    BCM power [259]
    3
    BCM [242]
    Figure 15. Front of Rear Tire
    1
    Left rear turn [18-2]
    2
    Stop/tail lamp [40]
    3
    Right rear turn [19-2]
    4
    Light bar interconnect [331]
    Figure 16. Rear Lighting: FLDE
    1
    Left turn lamp
    2
    Tail lamp [93]
    3
    Stop lamp [94]
    4
    Right turn lamp
    Figure 17. Rear Lighting: FLHC, FXLR
    1
    Left stop/turn lamp
    2
    LP lamp
    3
    Right stop/turn lamp
    Figure 18. Rear Lighting: FLSL, FLSB
    1
    Left stop/turn lamp
    2
    LP lamp
    3
    Right stop/turn lamp
    Figure 19. Rear Lighting: FLFB/S, FXBB, FXBR/S, FXFB
    1
    Tail lamp [93]
    2
    Rear fender tip lamp [45]
    3
    Left rear turn signal [19]
    4
    Right rear turn signal [18]
    5
    Rear fender lights harness in circuit board [94]
    Figure 20. Rear Fender Lights
    Special Tools
    Description
    Part Number
    Qty.
    SNAP-ON TERMINAL PICK
    GA500A
    1
    The Bosch Compact 1.1M style connector is typically found on ACR, MAP or TMAP sensors.
    Separating Connector
    Snap back the secondary lock. Press on the latch while pulling the connector from the sensor.
    Mating Connector
    1. Align the connector housings.
    2. Press the housings together until the locking tab snaps into place.
    Terminal Removal
    1. See Figure 1. Slide the locking bar off the terminal housing.
    2. Insert the smallest pins of the SNAP-ON TERMINAL PICK (Part Number:GA500A) into the gaps on each side
    of the terminal to compress the tangs on each side of the terminal.
    3. Gently pull on the wire to remove the terminal.
    Figure 1. Terminal Removal: Bosch Compact 1.1M Connector
    Installing Terminal
    1. See Figure 2. Use a hobby knife to bend the tangs on each side of the terminal outward.
    2. Align terminal to connector. Press terminal into connector until it snaps.
    NOTE

    Была ли эта страница вам полезна?
    Да!Нет
    5 посетителей считают эту страницу полезной.
    Большое спасибо!
    Ваше мнение очень важно для нас.

    Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

    Текст

    Матвей Александрович29.05.2024 06:03
    Политика конфиденциальности