Ford E-250 (2006 year). Manual — part 15

Press to raise or lower the rear
portion of the seat cushion.

Press the control to move the seat
forward, backward, up or down.

Quick release captains chair (7 passenger configuration second
row only)

To remove the seat:

1. Disengage the lap/shoulder belt
from the seat by inserting a key or
small screwdriver into the slot in the
detachable anchor and lifting
upward.

Seating and Safety Restraints

61

Stow the tongue end of the
detachable anchor.

2. Pull the seat latch handle, then
pull the seat toward the right side of
the vehicle to disengage four pins
from the floor mount.

3. Remove the seat.

To install the seat:

Check to see that the seat and seatback is latched securely in
position. Keep floor area free of objects that would prevent

proper seat engagement. Never attempt to adjust the seat while the
vehicle is in motion.

Ensure that the seat is latched to the vehicle floor by
pushing/pulling on the seat. If not latched, the seat may cause

injury during a sudden stop.

1. Position the seat to the floor
mount.

2. Pull the seat latch handle downward to lock the seat in position.

Seating and Safety Restraints

62

3. Make sure the safety belt is not twisted, then insert the safety belt
tongue into detachable anchor until you hear a “click” and feel the latch
engage.

REAR SEATS

Accessing the 4th and 5th row seats (if equipped)

To make access to the 4th and 5th
row seats easier, attach the 3rd and
4th row passenger side safety belts
to the trim panel by using the snaps
attached to the safety belt webbing
and the trim panel.

Rear bench seat

To remove the seats:

1. Disengage the lap/shoulder belt
from the seat by inserting a key or
small screwdriver into the slot in the
detachable anchor and lifting
upward (2nd row passenger side
only).

Seating and Safety Restraints

63

Stow the tongue end of the
detachable anchor (2nd row only).

2. Pull the LH/RH seat latch handles
(located under the seat) rearward to
release the latch hook ends from the
front strikers.

3. Move the seat rearward and lift the seats rear hooks away from the
rear strikers prior to lifting the front hooks out from the front strikers.

4. With assistance, remove the seat assembly.
• To remove the 3rd, 4th, and 5th row seats (if equipped), repeat Steps

2 through 4.

To install the seat:

Ensure that the seat is latched to the vehicle floor by
pushing/pulling on the seat. If not latched, the seat may cause

injury during a sudden stop.

1. Position the seat in the vehicle.

2. Align front hooks to front strikers, prior to lowering the rear hooks
and aligning them with the rear strikers.

Seating and Safety Restraints

64