Dacia Solenza (engine E7J). Service manual — part 106
51
51 - 6
MECHANISMS OF LATERAL OPENINGS
TIGHTENING MOMENTS(daNm)
Front door manual window regulator
Crank attachment nuts
0.7
DISMOUNTING
Bring the glass at the position P = 85 mm.
Dismount:
- front door panel (see chapter 72);
- front door deflective panel.
Remove the glass outside wiper.
Dismount:
- screws attaching glass bottom on the
crank glider and then remove the glass (together
with the glass bottom);
- crank attachment nuts (1) to the lower
and upper part.
- attachment nuts (3) of the crank
regulator.
Release the front door window regulator.
REMOUNTING
Perform the dismounting operations in the
reverse order, taking into account the following
recommendations:
- crank is to be introduced in the caisson
through the technological opening and is to be
attached in the window regulator area;
- attach the crank at the lower and upper
part;
- introduce the glass, previously mounted
with the glass bottom and attach it to the glider;
- check the crank operation by lifting and
lowering the glass;
- mount the deflective panel by sticking
to the sealant material continuos layer;
- mount the inside window wiper, front
door panel, crank handle, inside opening
mechanism.
2
1
51
51 - 7
MECHANISMS OF LATERAL OPENINGS
Rear door window regulator
TIGHTENING MOMENTS(daNm)
Crank attachment screws and nuts and nuts 0.7
DISMOUNTING
Dismount:
- front door panel (see chapter 72);
- front door deflective panel;
- glass outside wiper;
- screws attaching glass bottom on the
crank glider and then remove the glass (together
with the glass bottom);
- crank attachment nut (1) to the upper
part on the door caisson;
- attachment nuts (2) and screw (3)of the
crank regulator.
Release the rear door window regulator.
REMOUNTING
Perform the dismounting operations in the
reverse order, taking into account the following
recommendations:
- crank is to be introduced in the caisson
through the technological opening.
- attach the crank in the regulator area
and at upper part;
- introduce the glass (previously mounted
with the glass bottom) and attach it by means
of screws, to the glider
- check the crank positioning by lifting
and lowering the glass;
- mount the deflective panel by sticking
to the sealant material continuos layer;
- mount the inside window wiper, door
panel, crank handle, inside opening mechanism.
2
1
3
2
1
3
51
51 - 8
MECHANISMS OF LATERAL OPENINGS
1 . metallic insert locks kit
2. fork
3. cylinder lock
1
2
3
FRONT DOOR LOCK
DISMOUNTING
Dismount:
- crank handle by clips-detaching from the crank axle;
- inside opening mechanism;
- closing handle;
- front door panel;
- front door deflective panel.
After performing a.m. operations, dismount the attaching fork (2) of the cylinder lock (3) on
the door.
REMOUNTING
Perform the dismounting operations in the reverse order, taking into consideration the followings:
- checking the integrity of the deflective panel and of the continues sealant material layer
Romtix 1502P on the front door caisson;
- checking the operation of the inside opening mechanism and of the cylinder lock.
For the replacement of the others locks, please see the following chapters:
- anti-theft mechanism – chapter 84;
- filling cap – chapter 19;
- hatchback cylinder lock – chapter 52.
Locks
52
52 - 1
MECHANISMS OF NON LATERAL OPENINGS
Front bonnet lock
3
4
2
1
TIGHTENING MOMENTS(daNm)
Attachment screws of the bonnet lock hock
and lock
0.7
- attachment screws (4) of the bonnet
lock on the radiator upper cross beam.
Release the opening control cable (5) from
the lock.
Remove the obturator (6) and release the
cable from the opening handle (8).
DISMOUNTING
Dismount :
- attachment screws (2) of the bonnet
lock (1) to the front bonnet lining;
Dismount the attachment screws (7) of the
handle (8) on the side frame lining.
REMOUNTING
Perform the dismounting operations in the
reverse order.
Required tightening moment for attachments
screws of the lock hook and lock is of 0,7 daNm.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст