Dacia SuperNova (engine E7J). Service manual — part 94
NON SIDE OPENINGS ELEMENTS MECHANISMS
52
52 - 2
DISMOUNTING
Dismount: the front hood opening control cable (3), the attachment screws (2) and the front
hood locking system (1).
REMOUNTING
Perform in the reverse order the dismounting operations by tightening the screws (4) at the
moment of C=16Nm.
FRONT HOOD LOCKING SYSTEM
1
NON SIDE OPENINGS ELEMENTS MECHANISMS
52
52 - 3
HATCHBACK LOCKING SYSTEM (old model)
DISMOUNTING
Loosen the screw for rod length adjustment (5) of the hatchback opening and detach the rod;
Remove the fork (2) and the gasket (4) releasing the hatchback opening control assembly (3)
Dismount the screws (1) and the special axle (6), releasing the guiding case (7).
REMOUNTING
Perform in the reverse order the dismounting operations, the opening rod length adjustment
being performed with the hatchback opened and the lock blocked, in order that after three
consecutive drives, the rod mechanism control shall remain permanently tensioned.
HATCHBACK LOCKING SYSTEM
7
NON SIDE OPENINGS ELEMENTS MECHANISMS
52
52 - 4
DISMOUNTING
Dismount the hatchback opening control
assembly (2) by removing the fork (1) and
the gasket (2).
Dismount the special screw (6) and release
the assembled lock (5), while beforehand the
rod (5) was released.
REMOUNTING
Perform in the reverse order the dismounting operations.
HATCHBACK BALANCING DEVICE
DISMOUNTING
Dismount the ball joint (2) of the balanc-
ing device fixing (3) on the hatchback (1).
Dismount the balancing device attachment
on the hatchback frame (6), by removing the
locker (5) and the washer (4).
Release the balancing device.
REMOUNTING
Perform the dismounting operations in the reverse order.
HATCHBACK LOCKING SYSTEM
HATCHBACK LOCKING SYSTEM (after June 1
st
2001)
1
2
5
6
3
4
NON SIDE OPENINGS ELEMENTS MECHANISMS
52
52 - 5
HATCHBACK BALANCING DEVICE
DISMOUNTING
Dismount the ball joint (2) of the balanc-
ing device fixing (3) on the hatchback (1).
Dismount the balancing device attachment
on the hatchback frame (6), by removing the
locker (5) and the washer (4).
Release the balancing device.
REMOUNTING
Perform the dismounting operations in the reverse order.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст