SsangYong Rexton. Service manual — part 334
M161 ENGINE MECHANICAL 1B2-19
SSANGYONG Y200
YAD1B5T0
TENSIONING DEVICE SHOCK ABSORBER
1 End Cover
2 Bolt . . . . . 40.5 - 9.5 N•m (29.9 - 6.5 lb-ft)
3 Tensioning Pulley
4 Bolt (M8 X 25) + Washer
. . . . . . .. 22.5 - 7.5 N•m (16.6 - 0.3 lb-ft)
Removal & Installation Procedure
1. Remove the end cover (1).
2. Remove the bolt (2) and remove the tensioning
pulley (3).
Installation Notice
5 Tensioning Device
6 Bolt (M8 X 35) + Washer
. . . . . . .. 22.5 - 7.5 N•m (16.6 - 0.3 lb-ft)
7 Shock Absorber
Tightening Torque
22.5 - 27.5 N•m
(16.6 - 20.3 lb-ft)
Tightening Torque
40.5 - 49.5 N•m
(29.9 - 36.5 lb-ft)
3. Unscrew the bolts (4,6) and remove the shock ab-
sorber (7).
Installation Notice
SSANGYONG Y200
1B2-20 M161 ENGINE MECHANICAL
YAD1B5U0
YAD1B380
YAD1B390
YAD1B400
POLY V - BELT INSPECTION
•
Make marks on the belt with chalk.
•
Rotate the engine and check the belt for damage.
Notice: If one of the following types of damages is
found, replace the belt.
1. Rubber lumps in the base of rib.
2. Dirt or grit ingrained.
3. Pointed rib.
4. Belt cord visible in the base of rib.
5. Cord torn out at the side.
6. Outer cords frayed.
M161 ENGINE MECHANICAL 1B2-21
SSANGYONG Y200
YAD1B410
YAD1B420
YAD1B430
YAD1B440
7. Rib detached from the base of belt.
11. Splits across the back of the belt.
10. Splits across several ribs.
8. Splits across the rib.
9. Sections of rib torn out.
SSANGYONG Y200
1B2-22 M161 ENGINE MECHANICAL
CYLINDER HEAD COVER
YAD1B5V0
1 Spark Plug Cover
2 Spark Plug Connector
3 Bolt (M6 X 45 : 4 pieces, M6 X 60 : 6 pieces)
. . . . . . . . . 9 - 11 N•m (80 - 97 lb-in)
4 Cylinder Head Cover
5 Gasket . . . . . . . . . . . . . Replace
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст