SsangYong Rexton. Service manual — part 333
M161 ENGINE MECHANICAL 1B2-15
SSANGYONG Y200
YAD1B5G0
YAD1B5N0
Removal & Installation Procedure
1. Unscrew the upper engine mount nuts and remove
the engine.
Installation Notice
2. Unscrew the lower nuts.
Installation Notice
Tightening Torque
70 N•m (52 lb-ft)
Tightening Torque
38 N•m (28 lb-ft)
3. Remove the hydraulic engine mounting insulator.
4. Installation should follow the removal procedure
in the reverse order.
SSANGYONG Y200
1B2-16 M161 ENGINE MECHANICAL
YAD1B5P0
POLY V - BELT
Preceding Work:
Removal of cooling fan
1 Poly V-Belt (2,155 mm)
2 Belt Tensioning Pulley
Removal & Installation Procedure
1. Release the belt tension by turning the stud on
the cap with 12 sided wrench or spanner
counterclock-wise.
2. Remove the poly v-belt.
Notice: Check the belt for damage and tensioning
pulley bearing point for wear and replace them if
necessary.
3. Install the belt after prying the tensioning pulley.
3 Belt Tensioner
YAD1A130
M161 ENGINE MECHANICAL 1B2-17
SSANGYONG Y200
YAD1B5Q0
Poly V - Belt Arrangement
1 Belt Tensioning Pulley
2 Crankshaft Belt Pulley
3 A/C Compressor Pulley
5 Generator Pulley
7 Power Steering Pump Pulley
8 Water Pump Pulley
SSANGYONG Y200
1B2-18 M161 ENGINE MECHANICAL
YAD1B5R0
TENSIONING DEVICE
Preceding Work:
Removal of tensioning device shock absorber
1 Bolt (M8 x 75, 2 pieces) +
Washer . . . 22.5 - 27.5 N•m (16.6 - 0.3 lb-ft)
2 Bolt (M8 x 25, 1 pieces) +
Washer . . . 22.5 - 27.5 N•m (16.6 - 0.3 lb-ft)
Removal & Installation Procedure
1. Turn the stud bolt to counterclockwise.
2. Insert the pin (111 589 01 15 00) into the hole in
tensioning arm.
3. Unscrew the bolts (1, 2) and remove the tensioning
device.
Installation Notice
3 Tensioning Device
4 Stud bolt
5 Tensioning Arm
YAD1B5S0
4. Installation should follow the removal procedure
in the reverse order.
Tightening Torque
22.5 - 27.5 N•m
(16.6 - 20.3 lb-ft)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст