Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 409

Item

Description

1

Counterbalance

2

Reverse gear switch

3

Selector shaft

4

Selector finger

5

Selector gate

The selector interlock mechanism and selector finger are mounted on a sleeve in the selector mechanism housing. A spring-loaded ball
maintains the engagement of the selected gear. A counterbalance weight dampens the synchronized shift resistance of gear selection to
provide a smooth gear change operation.

The reverse lamp switch is mounted on the housing’s cover.

Published: 11-May-2011

Manual Transmission/Transaxle - Manual Transaxle

Diagnosis and Testing

For additional information, refer to Section

308-00 Manual Transmission/Transaxle and Clutch - General Information

Published: 11-May-2011

Manual Transmission/Transaxle - Transaxle Draining and FillingVehicles With:
5-Speed Manual Transmission - MT75

General Procedures

1. Raise and support the vehicle. For additional information, refer

toSection

100-02 Jacking and Lifting

2. Remove the drain plug.

3. Install the drain plug.

4. Remove the fill plug.

5. Fill the transaxle to 0.5 mm (0.02 in) below the lower edge of the fill

plug bore.

6. Install the fill plug.

Tighten to 45 Nm.

7. Lower the vehicle.

Published: 11-May-2011

Manual Transmission/Transaxle - Transaxle Draining and FillingVehicles With:
6-Speed Manual Transaxle - MMT6

General Procedures

1. Raise and support the vehicle.

For additional information, refer to:

Lifting

(100-02 Jacking and Lifting,

Description and Operation).

2. Remove the drain plug and drain the fluid into a suitable container

3. Install the drain plug.

Tighten to 35 Nm.

4. Remove the fill plug.

5. Fill the transaxle to 0 - 5 mm (0 - 0.20 in) below the lower edge of the

fill plug bore.

6. Install the fill plug.

Tighten to 35 Nm.

7. Lower the vehicle.