Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 505
Published: 11-May-2011
Air Conditioning - Clutch and Clutch Field Coil2.0L NA V6 - AJV6/2.5L NA V6 -
AJV6/3.0L NA V6 - AJ27
Removal and Installation
Special Tool(s)
Pulley Replacer
412-109
W rench Strap-Universal
303-D055
Crankshaft Damper Remover
303-D121
Removal
1. Remove the air conditioning (A/C) compressor.
For additional information, refer to:
Air Conditioning (A/C) Compressor -
2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA V6 - AJ27
(412-03 Air
Conditioning, Removal and Installation).
2. Using the special tool, loosen the A/C clutch retaining nut.
3. Remove the A/C clutch.
Remove the A/C clutch retaining nut.
4. Remove the A/C clutch shim.
5. Remove the A/C clutch pulley circlip.
6.
CAUTION: Do not use air tools. Failure to follow this instruction
may result in damage to the component.
Using the special tool, remove the A/C clutch pulley.
7. Remove the A/C sensor retaining plate.
8. Detach the A/C sensor.
9. Remove the A/C clutch and clutch field coil circlip.
10. Remove the A/C clutch and clutch field coil.
Installation
1. Install the A/C clutch and clutch field coil.
2.
CAUTION: Make sure the circlip is installed and seated correctly.
Failure to follow this instruction may result in damage to the vehicle.
Install the A/C clutch and clutch field coil circlip.
3. Attach the A/C temperature sensor.
4. Install the A/C temperature sensor retaining plate.
Tighten to 6 Nm.
5. NOTE: The A/C clutch bearing and pulley is a slip fit on the compressor.
If correctly aligned it should slip on easily. If difficulty is experienced on
installation, use the special tool and gently tap the A/C clutch pulley.
Using the special tool, install the A/C clutch pulley.
6.
CAUTION: Make sure the circlip is installed and seated correctly.
Failure to follow this instruction may result in damage to the vehicle.
Install the A/C clutch pulley circlip.
7. Install the A/C clutch shim.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст