Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 180
113. Connect the evaporative emission canister purge valve transfer pipe.
114. Attach the intake manifold rear retaining bracket.
Tighten to 10 Nm.
115. Attach the engine wiring harness from the intake manifold rear
retaining bracket.
116. Attach the intake manifold front retaining bracket.
Tighten to 10 Nm.
117. Install the fuel pressure regulator bracket.
Tighten to 10 Nm.
118. Tighten to 7 Nm.
119. Connect the fuel pressure regulator vacuum hose.
120. Connect the electrical connectors.
121. Connect the positive crankcase ventilation (PCV) hose.
122. Connect the throttle position sensor.
123. Connect the throttle motor electrical connector.
Published: 11-May-2011
Engine - 2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA V6 - AJ27 - EngineVehicles
With: 5-Speed Manual Transmission - MT75/6-Speed Manual Transaxle - MMT6
Installation
Special Tool(s)
Halfshaft oil seal installer
205-115
Link shaft limiting tool
307-446
Engine lifting kit
303-707
Powertrain Assembly Jack
HTJ12000-2
5 Point Security Torx Bit
418-535
Installation
All vehicles
1. Install the transaxle.
Tighten to 47 Nm.
2. Install the transaxle retaining bolts.
Tighten to 47 Nm.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст