Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 179

93. Install the engine wiring harness.

Tighten to 10 Nm.

94. Connect the engine wiring harness electrical connectors.

95. Connect the left-hand ignition coils.

96. Connect the left-hand camshaft position sensor.

97. Attach the engine harness.

98. Connect the right-hand ignition coils.

99. Attach the engine harness.

100. Attach the engine harness retaining bracket.

101. Disconnect the right-hand camshaft position sensor.

102. Install the rear knock sensor.

1. Attach the knock sensor wiring harness.

2. Install the rear knock sensor.

Tighten to 25 Nm.

103. Attach engine harness.

104. Attach the engine harness.

105. Connect the electrical connectors.

106. Install the coolant hose.

107. Install the coolant hose.

108. Connect the oil cooler coolant hoses.

109. Install the evaporative emission purge valve hose.

110. Install the engine breather hose.

111. Install new intake manifold gaskets.

112. NOTE: The intake manifold retaining bolts in position 1,2,3 and are
longer than the retaining bolts in position 4,5 and 6.

To install, reverse the removal procedure.

Install new intake manifold gaskets.

Tighten to 10 Nm.