Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 561
DTC
Description
Possible Source
Action
CAN short circuit fault
JGM failure
ECM failure
P1573
CAN throttle angle error
TP sensor fault (additional
DTCs logged)
ECM CAN message error
For TP sensor circuit tests,
REFER to:
Electronic Engine Controls - 2.5L NA V6 - AJV6/3.0L NA
V6 - AJ27, VIN Range: E96603->J28492
(303-14A Electronic
Engine Controls - 2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA V6
- AJ27, Diagnosis and Testing) /
Electronic Engine Controls - 2.5L NA V6 - AJV6/3.0L NA V6 - AJ27,
VIN Range: E96603->J28492
(303-14A Electronic Engine Controls -
2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA V6 - AJ27, Diagnosis
and Testing).
Error message sent on CAN, but not CAN related. Check for
additional DTCs indicating cause.
P1601
Incorrect ECM or TCM
fitted to vehicle
ECM configuration
TCM configuration
Configure the modules using the Jaguar approved diagnostic
system.
P1603
TCM EEPROM failure
Battery disconnected while
the ignition switched ON
B+ power supply circuit;
open circuit
TCM failure
For TCM EEPROM tests, GO to Pinpoint Test
B.
P1609
ECM microprocessor to
microprocessor
communication failure
ECM failure
Please check part is not on any form of prior authorization before
replacement.
P1611
ECM sub CPU failure
ECM failure
Please check part is not on any form of prior authorization before
replacement.
P1633
ECM main CPU failure
ECM failure
Please check part is not on any form of prior authorization before
replacement.
P1634
Throttle 'watch-dog'
circuit malfunction
ECM failure
Please check part is not on any form of prior authorization before
replacement.
P1637
CAN ECM to ABS/TCCM or
DSC control module
network malfunction
Module power supply or
ground interruption
CAN open circuit fault;
ABS/TCCM or DSC to ECM
CAN short circuit fault
ABS/TCCM or DSC module
failure
ECM failure
Refer to power and ground test for suspect module. For ABS/TCCM
or DSC CAN circuit tests, GO to Pinpoint Test
C.
Please check part
is not on any form of prior authorization before replacement.
P1638
CAN ECM / IC network
malfunction
Module power supply or
ground interruption
CAN open circuit fault; IC
to ECM
CAN short circuit fault
IC failure
ECM failure
Refer to power and ground test for suspect module. For IC CAN
circuit tests, GO to Pinpoint Test
D.
Please check part is not on
any form of prior authorization before replacement.
P1642
CAN circuit malfunction
Module power supply or
ground interruption
CAN short circuit fault
Control module failure;
Check for additional logged
DTCs to locate module
source
Refer to power and ground test for suspect module. For network
short circuit tests, GO to Pinpoint Test
E.
P1643
CAN ECM / TCM network
malfunction
Module power supply or
ground interruption
CAN open circuit fault; TCM
to ECM
CAN short circuit fault
TCM failure
ECM failure
Refer to power and ground test for suspect module. For CAN open
circuit tests, GO to Pinpoint Test
A.
For network short circuit
tests, GO to Pinpoint Test
E.
Please check part is not on any form
of prior authorization before replacement.
P1646
ECM HO2 sensor control
malfunction, right-hand
bank
HO2 sensor heater failure
HO2 sensor sensing circuit;
short circuit to ground,
short circuit to high
voltage, open circuit
ECM failure
For HO2 sensor circuit tests,
REFER to:
Electronic Engine Controls - 2.5L NA V6 - AJV6/3.0L NA
V6 - AJ27, VIN Range: E96603->J28492
(303-14A Electronic
Engine Controls - 2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA V6
- AJ27, Diagnosis and Testing) /
Electronic Engine Controls - 2.5L NA V6 - AJV6/3.0L NA V6 - AJ27,
VIN Range: E96603->J28492
(303-14A Electronic Engine Controls -
2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA V6 - AJ27, Diagnosis
and Testing).
Please check part is not on any form of prior authorization before
replacement.
P1647
ECM HO2 sensor control
malfunction, left-hand
bank
HO2 sensor heater failure
HO2 sensor sensing circuit;
short circuit to ground,
short circuit to high
voltage, open circuit
ECM failure
For HO2 sensor circuit tests,
REFER to:
Electronic Engine Controls - 2.5L NA V6 - AJV6/3.0L NA
V6 - AJ27, VIN Range: E96603->J28492
(303-14A Electronic
Engine Controls - 2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA V6
- AJ27, Diagnosis and Testing) /
Electronic Engine Controls - 2.5L NA V6 - AJV6/3.0L NA V6 - AJ27,
VIN Range: E96603->J28492
(303-14A Electronic Engine Controls -
2.0L NA V6 - AJV6/2.5L NA V6 - AJV6/3.0L NA V6 - AJ27, Diagnosis
and Testing).
Please check part is not on any form of prior authorization before
replacement.
P1648
ECM KS self-test failure
ECM failure
Please check part is not on any form of prior authorization before
replacement.
DTC
Description
Possible Source
Action
P1656
TP sensor amplifier circuit
malfunction
ECM failure
Please check part is not on any form of prior authorization before
replacement.
P1699
CAN ECM to EATCM
network malfunction
Module power supply or
ground interruption
CAN open circuit fault;
EATCM to ECM
CAN short circuit fault;
EATCM to ECM
EATCM failure
ECM failure
Refer to power and ground test for suspect module. For EATCM
open circuit tests, GO to Pinpoint Test
A.
For network short circuit
tests, GO to Pinpoint Test
F.
Please check part is not on any form
of prior authorization before replacement.
P1777
CAN torque reduction
error
ECM CAN message error
Error message sent on CAN, but not CAN related. Check for
additional DTCs indicating cause.
P1796
CAN network malfunction
Module power supply or
ground interruption
CAN short circuit fault
TCM failure
Refer to power and ground test for suspect module. For network
short circuit test, GO to Pinpoint Test
A.
P1797
CAN TCM/ECM network
malfunction
Module power supply or
ground interruption
CAN open circuit fault; TCM
to ECM
CAN short circuit fault
TCM failure
ECM failure
Refer to power and ground test for suspect module. For TCM
open/short circuit tests, GO to Pinpoint Test
C.
P1799
CAN TCM to ABS/TCCM or
DSC module network
malfunction
Module power supply or
ground interruption
CAN short circuit fault
ABS/TCCM or DSC module
failure
TCM failure
Refer to power and ground test for suspect module. For ABS/TCCM
short circuit tests, GO to Pinpoint Test
G.
U1041
GEM SCP network invalid
vehicle speed data
ABS/DSC wheel speed
message error
SCP network error
For GEM SCP network tests, GO to Pinpoint Test
H.
U1135
GEM SCP network invalid
ignition switch data
Instrument cluster ignition
switch message error
SCP network error
For GEM SCP network tests, GO to Pinpoint Test
H.
U1147
GEM anti-theft SCP
network invalid ignition
key-in data
GEM key-in message error
SCP network error
For GEM SCP network tests, GO to Pinpoint Test
H.
U1262
GEM SCP network ignition
switch state message
missing
SCP circuit(s); open circuit
SCP network error
For GEM SCP network tests, GO to Pinpoint Test
H.
U1262
ICE SCP network circuit
fault
SCP network circuit; open
circuit, short circuit to B+,
short circuit to ground
SCP network circuit fault
Audio unit fault
For ICE SCP network tests, GO to Pinpoint Test
I.
U1900
CAN instrumentation
messages missing
Engine management, ABS,
or DSC fault
CAN network fault
For ABS/DSC CAN network tests, GO to Pinpoint Test
G.
U1900
Automatic climate control
CAN fault
CAN circuit; open circuit,
short circuit to B+, short
circuit to ground
Automatic climate control
module internal CAN fault
CAN network fault
For EATC CAN network tests, GO to Pinpoint Test
F.
U1900
ABS CAN fault
CAN circuit: open circuit,
short circuit to B+, short
circuit to ground
ABS control module
internal CAN fault
CAN network fault
For ABS/DSC CAN network tests, GO to Pinpoint Test
G.
U1900
DSC CAN fault
CAN circuit; open circuit,
short circuit to B+, short
circuit to ground
DSC control module
internal CAN fault
CAN network fault
For ABS/DSC CAN network tests, GO to Pinpoint Test
G.
U2003
CD autochanger not
responding on D2B
network
D2B network 'wake-up'
circuit; short circuit to B+,
short circuit to ground
D2B network fault
For D2B 'wake-up' circuit tests, GO to Pinpoint Test
K.
For CD
autochanger D2B network tests, GO to Pinpoint Test
J.
For D2B
permanent supply tests, GO to Pinpoint Test
R.
U2008
Cellular telephone not
responding on D2B
network
D2B network 'wake-up'
circuit; short circuit to B+,
short circuit to ground
D2B network fault
For D2B 'wake-up' circuit tests, GO to Pinpoint Test
K.
For cellular
telephone D2B network tests, GO to Pinpoint Test
L.
For D2B
permanent supply tests, GO to Pinpoint Test
R.
For D2B accessory
switched supply tests, GO to Pinpoint Test
S.
For D2B ignition
switched supply tests, GO to Pinpoint Test
T.
DTC
Description
Possible Source
Action
U2019
VACM not responding on
D2B network
D2B network 'wake-up'
circuit; short circuit to B+,
short circuit to ground
D2B network fault
For D2B 'wake-up' circuit tests, GO to Pinpoint Test
K.
For VACM
D2B network tests, GO to Pinpoint Test
M.
For D2B accessory
switched supply tests, GO to Pinpoint Test
S.
For D2B ignition
switched supply tests, GO to Pinpoint Test
T.
U2196
Instrument cluster CAN
engine speed message
invalid
Verify integrity of engine
management system
CAN network fault
For instrument cluster CAN network tests, GO to Pinpoint Test
D.
U2197
Instrument cluster CAN
engine speed message
invalid
Verify integrity of engine
management system
CAN network fault
For instrument cluster CAN network tests, GO to Pinpoint Test
D.
U2199
Instrument cluster CAN
engine coolant
temperature message
invalid
Verify integrity of engine
management system
CAN network fault
For instrument cluster CAN network tests, GO to Pinpoint Test
D.
U2200
Instrument cluster CAN
odometer count message
invalid
Verify integrity of ABS or
DSC systems
CAN network fault
For instrument cluster CAN network tests, GO to Pinpoint Test
D.
U2202
Invalid DSC control
module CAN configuration
data received from ECM
Reconfigure the ECM using
the Jaguar approved
diagnostic system
CAN network fault
For ECM CAN network tests, GO to Pinpoint Test
E.
U2202
Invalid ABS control
module CAN configuration
data received from ECM
Reconfigure the ECM using
the Jaguar approved
diagnostic system
CAN network fault
For ECM CAN network tests, GO to Pinpoint Test
E.
U2509
ECM unable to fulfill ABS
CAN torque reduction
request
Verify integrity of engine
management system
CAN network fault
For ABS/DSC CAN network tests, GO to Pinpoint Test
G.
U2509
ECM unable to fulfill DSC
CAN torque reduction
request
Verify integrity of engine
management system
CAN network fault
For ABS/DSC CAN network tests, GO to Pinpoint Test
G.
U2510
(security
flash code
23)
Anti-theft ECM
identification mismatch
ECM configuration fault
Incorrect ECM installed
Reconfigure ECM using the Jaguar approved diagnostic system.
Please check part is not on any form of prior authorization before
replacement.
U2511
Anti-theft ECM invalid
data
ECM configuration fault
Incorrect ECM installed
SCP network error
Reconfigure ECM using the Jaguar approved diagnostic system.
Please check part is not on any form of prior authorization before
replacement.
U2514
GEM wash/wipe SCP
network vehicle speed
message missing
SCP circuit(s); open circuit
SCP network error
For GEM SCP network tests, GO to Pinpoint Test
H.
U2520
Memory seats
CAN open circuit fault:
memory seat module to
diagnostic connector
CAN short circuit fault
Memory seat module
failure
For CAN open/short circuit tests, GO to Pinpoint Test
A.
U2600
Audio D2B network
'wake-up' circuit fault
D2B network 'wake-up'
circuit; short circuit to B+
For D2B 'wake-up' circuit tests, GO to Pinpoint Test
K.
U2601
Audio D2B network
'wake-up' circuit fault
D2B network 'wake-up'
circuit; short circuit to B+
For D2B 'wake-up' circuit tests, GO to Pinpoint Test
K.
U2601
Voice activation module
D2B network 'wake-up'
circuit fault
D2B network 'wake-up'
circuit; short circuit to
ground
For D2B 'wake-up' circuit tests, GO to Pinpoint Test
K.
U2602
Break in optical ring
FROM ICE head unit
(transmitter)
D2B network module
disconnected
D2B network optical ring
broken
For optical ring tests, GO to Pinpoint Test
P.
U2603
Break in optical ring TO
ICE head unit (receiver)
D2B network module
disconnected
D2B network optical ring
broken
For optical ring tests, GO to Pinpoint Test
Q.
U2609
Voice activation module
D2B network 'wake-up'
signal out of specification
D2B network 'wake-up'
circuit; high resistance
Voice activation module
failure
For D2B 'wake-up' circuit tests, GO to Pinpoint Test
K.
U2610
Voice activation module
D2B network 'position
status report' not
received
D2B network fault
For D2B 'wake-up' circuit tests, GO to Pinpoint Test
K.
U2611
Voice activation module
D2B network 'alarm clear
command' not received
D2B network fault
For D2B 'wake-up' circuit tests, GO to Pinpoint Test
K.
DTC
Description
Possible Source
Action
U2613
Navigation control
module not responding
on D2B network
D2B network 'wake-up'
circuit; short circuit to B+,
short circuit to ground
D2B network fault
Module permanent supply
fault
Module accessory switched
supply fault
Module ignition switched
supply fault
For D2B 'wake-up' circuit tests, GO to Pinpoint Test
K.
For
navigation module optical tests, GO to Pinpoint Test
N.
For D2B
permanent supply tests, GO to Pinpoint Test
R.
For D2B accessory
switched supply tests, GO to Pinpoint Test
S.
U2614
Amplifier not responding
on D2B network
D2B network 'wake-up'
circuit; short circuit to B+,
short circuit to ground
D2B network fault
For D2B 'wake-up' circuit tests, GO to Pinpoint Test
K.
For
amplifier optical tests, GO to Pinpoint Test
O.
For D2B permanent
supply tests, GO to Pinpoint Test
R.
For D2B accessory switched
supply tests, GO to Pinpoint Test
S.
None
ISO circuit malfunction,
RCM
RCM K-line circuit; open
circuit
RCM K-line circuit; short
circuit
For RCM ISO tests, GO to Pinpoint Test
AP.
None
ISO circuit malfunction,
HID module
HID module K-line circuit;
open circuit
HID module K-line circuit;
short circuit
For HID module ISO tests, GO to Pinpoint Test
AQ.
None
ISO circuit malfunction,
roof console module
Roof console module K-line
circuit; open circuit
Roof console module K-line
circuit; short circuit
For roof console module ISO tests, GO to Pinpoint Test
AR.
None
ISO circuit malfunction,
reverse park aid module
Reverse park aid module
K-line circuit; open circuit
Reverse park aid module
K-line circuit; short circuit
For reverse park aid module ISO tests, GO to Pinpoint Test
AS.
None
ISO circuit malfunction,
ECM
ECM K-line circuit; open
circuit
ECM K-line circuit; short
circuit
For ECM ISO tests, GO to Pinpoint Test
AT.
None
ISO circuit malfunction,
fuel fired heater (FFH)
module
FFH module K-line circuit;
open circuit
FFH module K-line circuit;
short circuit
For FFH module ISO tests, GO to Pinpoint Test
AU.
Power and Ground circuit test index
Modules may log DTCs if the power supply or GROUND is interrupted. Supply and GROUND tests are covered below by module name.
Description
Possible source
Action
IC supply or ground fault
B+ supply failure
Ign+ supply failure
Acc+ supply failure
GROUND failure
For IC circuit tests, GO to Pinpoint Test
U.
SWRS supply or ground fault
Module supply failure
GROUND failure
For SW RS circuit tests, GO to Pinpoint Test
V.
Yaw rate sensor supply or ground fault
Module supply failure
GROUND failure
For yaw rate sensor circuit tests, GO to Pinpoint Test
W .
ABS/TCCM supply or ground fault
Ign+ supply failure
Pump+ supply failure
Solenoid+ supply
failure
GROUND failure
Motor GROUND
failure
For ABS/TCCM circuit tests, GO to Pinpoint Test
X.
DSC module supply or ground fault
Ign+ supply failure
Pump+ supply failure
Solenoid+ supply
failure
GROUND failure
Motor GROUND
failure
For DSC module circuit tests, GO to Pinpoint Test
Y.
GSI module supply or ground fault
Ign+ supply failure
GROUND failure
For GSI module circuit tests, GO to Pinpoint Test
Z.
HID module supply or ground fault
Ign+ supply failure
GROUND failure
For HID module circuit tests, GO to Pinpoint Test
AA.
EATC module supply or ground fault
B+ supply failure
B+save supply failure
Ign+ supply failure
GROUND failure
For EATC module circuit tests, GO to Pinpoint Test
AB.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст