Jaguar X-Type Sedan and Estate (Wagon). Service manual — part 666
9.
CAUTION: Make sure the bumper cover is supported before
removing the securing bolts.
• NOTE: Left-hand shown, right-hand similar.
Remove the bumper cover.
Remove the bumper cover securing bolts.
Installation
1. To install, reverse the removal procedure.
Tighten to 7 Nm.
2. Tighten to 7 Nm.
Published: 11-May-2011
Bumpers - Front Bumper Cover Insert
Removal and Installation
Removal
1. Remove the front bumper cover. For additional information, refer
toSection
501-19 Bumpers
.
2. Remove the energy absorbing foam.
1. Remove the energy absorbing foam retaining clips.
2. Remove the energy absorbing foam.
3. Remove the bumper insert retaining clips.
4. Using a suitable thin lever to avoid damaging the paintwork,
progressively ease the moulding away from the front bumper.
Installation
1. To install, reverse the removal procedure.
Published: 11-May-2011
Bumpers - Rear Bumper4-Door
Removal and Installation
Removal
1. Remove the rear bumper cover. For additional information, refer to
Bumper Cover—Rear
.
2. Remove the bumper insulator.
3. Remove the rear bumper.
Installation
1. To install, reverse the removal procedure.
Tighten to 17 Nm,
Published: 11-May-2011
Bumpers - Rear BumperWagon
Removal and Installation
Removal
1. Remove the rear bumper cover.
For additional information, refer to:
Rear Bumper Cover - Wagon
(501-19
Bumpers, Removal and Installation).
2. NOTE: Left-hand shown, right-hand similar.
Remove the rear bumper insulators.
3. Remove the rear bumper retaining bolts.
4. Remove the rear bumper.
Installation
1. To install, reverse the removal procedure.
Tighten to 17 Nm,
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст