Peugeot 308 (2022 year). Manual in english — page 3
Ease of use and comfort
The distance between the knees and the
Passenger’s side
Driving position
3
dashboard should be at least 10 cm, for easy
access to the dashboard controls.
Correct seating position
Adjust the backrest angle to as vertical a position
Adopting a good driving position contributes to
as possible; never tilt it more than 25°.
improving driver comfort and protection.
Adjust the head restraint so that its upper edge is
It also optimises interior and exterior visibility as
level with the top of the head.
well as access to controls.
Adjust the length of the seat cushion to support
Certain seat adjustments described in this
your thighs.
section depend on the trim level and the country
Adjust the lumbar support so that it conforms to
in which the vehicle is sold.
the shape of the spine.
Adjust the steering wheel reach so that it is at
Driver’s side
Sit fully back in the seat with the pelvis, back and
least 25 cm from the sternum and you can hold it
shoulders in contact with the seat backrest.
with your arms slightly bent.
Adjust the longitudinal position of the seat so that
Adjust the steering wheel height so that it does
you are at a distance of at least 25 cm from the
not obstruct the information displayed on the
dashboard.
instrument panel.
Adjust the head restraint so that its upper edge is
As a safety precaution, adjust the seats
level with the top of the head.
only when the vehicle is stationary.
Before moving off
Electrically-adjustable seats
Adjust the interior and exterior door mirrors to
Switch the ignition on to enable the
reduce blind spots.
adjustments to be made.
Fasten the seat belt: place the diagonal belt in
Sit fully back in the seat with your pelvis, back
the middle of the shoulder and adjust the lap belt
and shoulders in contact with the seat backrest.
so that it is tightened across the pelvis.
Adjust the seat cushion height so that your eyes
Ensure that all passengers have fastened their
are level with the centre of the windscreen.
seat belts correctly.
The head should be at a minimum distance of
10 cm from the roof.
Electric door mirrors
Adjust the longitudinal position of the seat so
Switch the ignition on to enable the
that you can fully depress the pedals with legs
adjustments to be made.
slightly flexed.
43
Ease of use and comfort
When driving
Front head restraints
Refitting a head restraint
Maintain a good driving position and hold the
► Insert the head restraint rods into the guides
steering wheel with both hands at the 'quarter to
Adjusting the height
in the corresponding seat backrest.
three' position, so that you can easily and quickly
► Push the head restraint fully down.
reach the controls behind and near the steering
► Press the lug A to release the head restraint
wheel.
and push it down.
► Adjust the height of the head restraint.
Never adjust the seats or steering wheel
when driving.
Never drive with the head restraints
Always keep your feet on the floor.
removed; they should be in place and
adjusted for the occupant of the seat.
Upwards:
Front seats
► Pull the head restraint up to the desired
Manual adjustments
position; you can feel the head restraint clicking
Before moving the seat backwards,
into position.
Longitudinal
ensure that there is no person or object
Downwards:
that might prevent the full travel of the seat.
► Depending on equipment, press lug A or
There is a risk of trapping or pinching
button B and then, while still pressing, lower the
passengers if present in the rear seats or of
head restraint.
jamming the seat if large objects are placed
on the floor behind the seat.
The head restraint is correctly adjusted
when its upper edge is level with the top
of the head.
► Raise the control bar and slide the seat
Removing a head restraint
forwards or backwards.
► Release the control bar to lock the seat in
► Pull the head restraint fully up.
position on one of the notches.
► Press lug A to release the head restraint and
raise it fully.
► Stow the head restraint securely.
44
Ease of use and comfort
Height
► Turn the knob to obtain the desired level of
Cushion height and angle
3
lumbar support.
Seat cushion length
► Pull the control upwards to raise or push it
downwards to lower, until you obtain the position
► Tilt the rear of the control upwards or
required.
downwards to obtain the required height.
► Pull the handle forwards to release the
► Tilt the front of the control upwards or
Backrest angle
cushion, then move the front part of the cushion
downwards to obtain the required angle.
forwards or backwards.
Backrest angle
Electric adjustments
Longitudinal
► Turn the knob to obtain the desired angle.
Lumbar
► Tilt the control forwards or rearwards.
► Push the control forwards or backwards to
slide the seat.
45
Ease of use and comfort
Lumbar
Memorising driving
► Press button 1 or 2 to recall the
corresponding position.
positions
An audible signal sounds when adjustment is
Associated with the electrically-adjusted driver’s
complete.
seat, this function allows two driving positions
You can interrupt the current movement by
to be memorised, to make these adjustments
pressing button M, 1 or 2 or by using one of the
easier if there are frequent driver changes.
seat adjustment controls.
It records the electric adjustments made to the
A stored position cannot be recalled while
seat and door mirrors.
driving.
The control allows independent adjustment of
The recalling of stored positions is deactivated
the depth and vertical position of the lumbar
45 seconds after switching off the ignition.
support.
► Press and hold the front or rear of the
Heated seats
control to increase or reduce the lumbar
support.
Without i-Toggles
► Press and hold the top or bottom of the
On/Off
control to raise or lower the lumbar support area.
Using buttons 1/2/M
Seat cushion angle
► Enter the vehicle and switch the ignition on.
► Adjust your seat and the door mirrors.
This electric adjustment control is present on
► Press button M, then press button 1 or 2
‘AGR’ certified manually-adjustable seats.
within 4 seconds.
An audible signal confirms the memorisation.
Memorising a new position cancels the previous
position.
Recalling a stored position
► Press the button corresponding to the seat.
► Each press changes the heating level; the
While the seat is moving, take care that
corresponding number of indicator lamps come
no person or object hinders the
on.
automatic movement of the seat.
► Press and hold the front or rear of the button
► To switch off the heating, press the button
to raise or lower the front of the seat cushion.
until all of the indicator lamps are off.
With the ignition on or engine running
46
Ease of use and comfort
The system status is memorised when the
consumption in turn decreases energy
If the settings are suitable, press to
3
ignition is switched off.
consumption.
activate/deactivate the function in the
Seat Options application.
With i-Toggles
If no action is taken, the display returns to its
Prolonged use of heated seats is not
Activation/Deactivation
recommended for people with sensitive
initial state.
skin.
The function status is not memorised when the
In the Seat Options touch screen
There is a risk of burns for people whose
ignition is switched off.
application, select the Seat Options tab.
perception of heat is impaired (e.g. illness,
Changing settings
► Select the driver or passenger seat.
taking medication).
The corresponding page is displayed with the
► In the Massage page, select the seat
To keep the heated pad intact and to prevent
last memorised settings.
concerned.
a short circuit:
If the settings are suitable, press to
► Select a massage intensity from the three
- Do not place heavy or sharp objects on the
activate/deactivate the function in the
preset levels: "1" (Low), "2" (Normal) or "3"
seat.
Seat Options application.
(High).
- Do not kneel or stand on the seat.
If no action is taken, the display returns to its
► Select another type of massage from those
- Do not spill liquids onto the seat.
initial state.
offered.
- Never use the heating function if the seat
The function status is not memorised when the
The modifications are taken into account
is damp.
ignition is switched off.
immediately and memorised when the ignition is
switched off.
Changing settings
Once activated, the system starts a one hour
Multipoint massage
► In the Seat Options page, select the seat
massage cycle, made up of sequences of 6
concerned.
System with a choice of type of massage and
minutes of massage followed by 3 minutes at
► Select an intensity from the three preset
adjustment of its intensity.
rest.
levels: "1" (Low), "2" (Normal) or "3" (High).
This system operates with the engine running, as
The system stops automatically at the end of the
The settings are memorised when the ignition is
well as in STOP mode of the Stop & Start.
cycle.
switched off.
Activation/Deactivation
Do not use the function when the seat
In the Seat Options touch screen
is not occupied.
application, select the Massage tab.
Reduce the heating intensity as soon as
► Select the driver or passenger seat.
possible.
The corresponding page is displayed with the
When the seat and passenger compartment
last memorised settings.
have reached a satisfactory temperature,
switch the function off; reducing electrical
47
Ease of use and comfort
It can be activated when the outside temperature
Steering wheel
Mirrors
is below 20°C.
adjustment
Without i-Toggles
Door mirrors
Demisting/Defrosting
The demisting/defrosting of the door
mirrors works with the demisting/
defrosting of the rear screen.
For more information on Rear screen
demisting/defrosting, refer to the
► When stationary, pull the control to release
corresponding section.
the steering wheel.
► With the engine running, press this button to
As a safety measure, the mirrors should
► Adjust the height and reach to suit your
activate/deactivate the function (confirmed by the
be adjusted to reduce the "blind spots".
driving position.
indicator lamp coming on/going out).
The objects that you see in the mirrors are
► Push the control to lock the steering wheel.
The system is automatically deactivated every
in fact closer than they appear. Take this
time the engine is switched off.
For safety reasons, these adjustments
into account in order to correctly judge the
With i-Toggles
must only be carried out with the vehicle
distance of vehicles approaching from behind.
In the Climate touch screen application,
stationary.
select the Seats and Steering Wheel
tab.
PEUGEOT i-Cockpit®
Press to activate/deactivate the function.
The instrument panel information is
visible above the steering wheel, for greater
The function is memorised each time the engine
safety and driving comfort.
is switched off.
Adjust the steering wheel height so that it
does not obstruct the instrument panel.
Heated steering wheel
In cold weather, this function heats the circular
part of the steering wheel.
48
Ease of use and comfort
Adjustment
- Once the vehicle speed exceeds 6 mph
► From the inside, with the
3
(10 km/h).
ignition on, place control A in the
- When the engine is switched off.
central position.
It can be activated/deactivated in the
► Pull control A backwards.
Settings > Vehicle touch screen
► Lock the vehicle from the outside.
application.
If the mirrors are folded using control A,
Interior rear view mirror
they will not unfold when the vehicle is
Equipped with an anti-dazzle system, which
unlocked.
darkens the mirror glass and reduces the
nuisance to the driver caused by the sun,
Electric unfolding
headlamps of other vehicles, etc.
► From outside: unlock the vehicle.
Manual model
► From inside: with the ignition on, place
control A in the central position and then pull it
Day/night position
rearwards.
► Move control A to the right or to the left to
select the corresponding mirror.
The automatic folding/unfolding of the
► Move control B in any of the four directions
door mirrors is configured in the
to adjust.
Settings > Vehicle touch screen application.
► Return control A to its central position.
Before using an automatic car wash, fold the
mirrors.
Manual folding
► Pull the lever to change to the anti-dazzle
The mirrors can be folded manually (parking
Automatic tilting in reverse gear
"night" position.
obstruction, narrow garage, etc.).
Depending on version, this function allows you to
► Push the lever to change to the normal "day"
► Turn the mirror towards the vehicle.
automatically tilt the mirrors downwards to assist
position.
Electric folding
with parking manoeuvres in reverse gear.
Adjustment
With the engine running, on engaging reverse
► Adjust the mirror to the normal "day" position.
Depending on equipment, the door mirrors can
gear, the mirror glasses tilt downwards.
be folded electrically.
They each return to their original positions:
- A few seconds after coming out of reverse
gear.
49
Ease of use and comfort
Automatic "electrochrome" model
vehicle is being driven in Electric mode
Refitting a head restraint
(depending on country of sale).
► Insert the head restraint rods into the guides
in the corresponding backrest.
► Push the head restraint fully down.
Rear bench seat
► Press the lug A to release the head restraint
and push it down.
Rear head restraints
Never drive with passengers seated at
the rear when the head restraints are
removed; the head restraints should be in
place and in the high position.
The head restraint for the centre seat
and those for the outer seats are not
interchangeable.
The electrochrome system uses a sensor that
detects the level of exterior brightness and that
Folding the backrests
coming from the rear of the vehicle, in order to
automatically and gradually switch between day
They have two positions:
and night usage.
- A high position, for when the seat is in use:
To ensure optimum visibility while
► Pull the head restraint fully up.
manoeuvring, the mirror automatically
- A low position, for stowing, when the seat is
brightens when reverse gear is engaged.
not in use:
The system is deactivated if the load in the
► Press the lug A to release the head
boot exceeds the height of the load space
restraint and push it down.
cover or if the load space cover has items
The rear head restraints can be removed.
placed on it.
Removing a head restraint
Each section of the backrest has one or two
► Release the backrest using control 1.
release controls:
Rechargeable hybrid vehicles
- A grip 1 on the outer edge of the backrest.
► Tilt the backrest slightly forwards.
An LED, located below the interior rear
- A lever 2 on the boot side trim (SW).
► Pull the head restraint fully up.
view mirror and visible from outside the
► Press the lug A to release the head restraint
vehicle, lights up blue to indicate that the
and remove it completely.
50
Ease of use and comfort
The backrests should only be
From the passenger compartment
From the boot (SW)
3
manoeuvred when the vehicle is
stationary.
First steps:
► Lower the head restraints, or remove them
when carrying heavy loads.
► Lift up the rear armrest.
► If necessary, move the front seats forward.
► Check that no person or object might interfere
with the folding of the backrests (e.g. clothing,
luggage).
► Press backrest release handle 1.
► Pull the backrest release lever 2 towards you.
► Check that the outer seat belts are lying flat
The backrest 3 folds fully onto the cushion.
on the backrests.
On the left-hand side, the lever is also
The folding of the backrest is
used for folding down the central section
accompanied by a slight lowering of the
of the backrest.
corresponding cushion.
To obtain a flat surface, it is necessary to
Central backrest (SW)
place the adjustable boot floor in the high
The central section of the backrest may be
position.
folded down independently of the side sections.
When the backrest is released, the red
indicator in the release grip is visible.
► Guide the backrest 3 down to the horizontal
position.
► Check in advance that the rear armrest is not
folded down and that the central head restraint
is not raised.
51
Ease of use and comfort
► From inside the passenger compartment or
Heating and Ventilation
3. Adjustable and closable side air vents
from the boot, pull on the strap to release.
4. Adjustable and closable central air vents
► Fold the backrest onto the seat cushion.
Air intake
5. Air outlets to the front footwells
► When repositioning, lift up the backrest fully
The air circulating in the passenger compartment
6. Air outlets to the rear footwells
until it locks.
is filtered and originates either from the
7. Adjustable and closable air vents
exterior, via the grille located at the base of the
Repositioning the backrests
windscreen, or from the inside in air recirculation
Advice
mode.
First check that the outer seat belts are
lying vertically flat alongside the backrest
Controls
Using the ventilation and air
conditioning system
latching rings.
Depending on version, certain controls
► To ensure that air is distributed evenly,
are accessible in the Climate touch
keep the external air intake grilles at the base
screen application and/via the control panel on
of the windscreen, the nozzles, the vents, the
the centre console.
air outlets and the air extractor in the boot
Air distribution
free from obstructions.
► Do not cover the sunshine sensor located
on the dashboard; this sensor is used to
regulate the automatic air conditioning
system.
► Operate the air conditioning system for at
least 5 to 10 minutes once or twice a month to
► Put the backrest 3 in the upright position and
keep it in good working order.
push it firmly to latch it home.
► If the system does not produce cold air,
► Check that the red indicator is no longer
switch it off and contact a PEUGEOT dealer
visible in the release grip 1.
or a qualified workshop.
► Ensure that the outer seat belts were not
When towing a large load on a steep gradient
trapped during the operation.
in high temperatures, switching off the air
Please note: an incorrectly latched
conditioning increases the available engine
backrest compromises the safety of
power, enhancing the towing capacity.
passengers in the event of sudden braking or
1.
Windscreen demisting/de-icing vents
an accident.
Avoid driving for too long with the
2.
Front side window demisting/de-icing vents
The contents of the boot may be thrown
ventilation off or with prolonged operation
forwards - risk of serious injury!
52
Ease of use and comfort
of interior air recirculation. Risk of misting and
Stop & Start
This system works with the engine running, but
3
deterioration of the air quality!
The heating and air conditioning systems
access to the ventilation and its controls remains
only operate when the engine is running.
possible with the ignition on.
If the interior temperature is very high
Temporarily deactivate the Stop & Start
Press the Climate application button to
after the vehicle has stood for a long
system to maintain a comfortable temperature
display the system controls page.
time in the sunshine, air the passenger
in the passenger compartment.
compartment for a few moments.
For more information on the Stop &
Put the air flow control at a setting high
Start system, refer to the corresponding
enough to quickly change the air in the
section.
passenger compartment.
Rechargeable hybrid vehicles
Condensation created by the air
Intensive use of the air conditioning
conditioning results in a discharge of
reduces the vehicle range in Electric mode.
water underneath the vehicle. This is perfectly
normal.
Ventilation with the ignition on
When the ignition is switched on, the ventilation
Servicing the ventilation and air
system and the air flow 2 and air distribution
Without i-Toggles
conditioning system
3 settings in the passenger compartment are
► Ensure that the passenger compartment
activated, for a period which depends on the
filter is in good condition and have the filter
battery charge.
elements replaced regularly.
This function does not include the air
We recommend using a composite passenger
conditioning system.
compartment filter. Its specific active additive
helps protect against polluting gases and bad
smells.
Dual-zone automatic air
► To ensure correct operation of the
conditioning
air conditioning system, have it checked
This system automatically controls the activation
according to the recommendations in the
of the air conditioning system, regulating the
Manufacturer’s service schedule.
temperature, air flow and air distribution inside
With i-Toggles
the passenger compartment.
1. Temperature adjustment
53
Ease of use and comfort
2. Air flow adjustment
Temperature
To change the AUTO mode, press button
3. Air distribution adjustment
5-AUTO successively.
synchronisation
4. Air conditioning on/off
To ensure passenger comfort in the rear seats,
The driver side temperature setting is applied to
favour settings AUTO NORMAL and AUTO
5. Automatic air conditioning on/off and setting
the passenger side.
FAST.
(AUTO SOFT/AUTO NORMAL/AUTO
► Press button 6-SYNC to activate/deactivate
FAST)
In cold weather with the engine cold, the
the function.
6. Driver/front passenger temperature
air flow is increased gradually until the
The function is automatically deactivated if the
synchronisation
comfort setting has been reached, in order to
passenger uses their temperature adjustment
7. AQS function only or Clean Cabin
limit the delivery of cold air into the passenger
buttons.
(depending on version).
compartment.
8. Front demisting/de-icing
Automatic air conditioning
On entering the vehicle, if the interior
9. Interior air recirculation
temperature is much colder or warmer than
This automatic mode ensures optimum
10. Maximum A/C (depending on version)
the comfort setting requested, there is no
management of the passenger compartment
11. Rear screen demisting/de-icing
need to alter the value displayed to more
temperature, air flow and air distribution, based
12. Switching the system off
quickly reach the required level of comfort.
on the selected comfort level.
The system automatically corrects the
► Press button 5-AUTO to activate/deactivate
Temperature adjustment
temperature difference as quickly as possible.
the automatic mode of the air conditioning
The driver and front passenger can each choose
system.
their own temperature setting.
The indicator lamp in the button lights up
Automatic air conditioning
The value indicated corresponds to a level of
when the air conditioning system is operating
manual settings
comfort and not to a precise temperature.
automatically.
Depending on version:
The intensity of the automatic air conditioning
It is possible to manually adjust one or more
► Turn one of the knobs 1 towards + or - to
is modulated by choosing one of the following
of these functions, while the system retains
increase or decrease the value.
settings:
automatic control of the other functions:
► Press one of the buttons 1 (+ or -) or drag
- AUTO SOFT: provides soft and quiet
- air flow.
vertically to increase or decrease the value.
operation by limiting air flow.
- air distribution.
It is possible to go beyond the minimum and
- AUTO NORMAL: offers the best compromise
The indicator lamp in the "AUTO” button goes
maximum values by selecting respectively Low
between a comfortable temperature and quiet
out if a setting is changed.
or High.
operation (default setting).
► Press button 5-AUTO again to reactivate
It is recommended that you avoid a difference of
- AUTO FAST: provides dynamic and efficient
automatic air conditioning.
more than 3°C in the settings for left and right.
air distribution.
54
Ease of use and comfort
Adjusting the air flow
Clean Cabin function
If the air quality appears to be reduced, contact
3
Depending on version:
a PEUGEOT dealer or a qualified workshop
It includes the AQS (Air Quality System) and
► Press one of the buttons 2 (fan) to decrease
to change the high-performance passenger
Clean Air functions.
or increase the air flow.
compartment filter.
► To activate/deactivate the function, press
► Press one of the buttons 2 (fan) or drag
button 7.
Air conditioning on/off
horizontally to increase or decrease air flow.
AQS function
It is also possible to directly press one of the
The air conditioning system is designed to
values.
Using an exterior pollution sensor, this function
operate effectively in all seasons, with the
automatically activates the recirculation of
windows closed:
Switching off the air conditioning
interior air when a certain level of pollutants in
- It lowers the temperature in summer.
system
the exterior air is detected.
- It increase the effectiveness of the demisting,
When the air flow is reduced to a minimum,
When the air quality returns to a satisfactory
in winter, above 3°C.
ventilation stops.
level, recirculation of interior air is automatically
► Press button 4-A/C to switch the air
“OFF" is displayed alongside the fan.
deactivated.
conditioning on/off.
This function is not designed to detect
When the system is switched on, the indicator
Adjusting the air distribution
unpleasant odours.
lamp in the button comes on or “A/C” changes
Recirculation is automatically activated when the
colour (depending on version).
► Press the buttons 3 to adjust the air flow
windscreen wash is used or when reverse gear
distribution inside the passenger compartment.
Air conditioning does not operate when
is engaged.
Windscreen and side windows
the air flow is deactivated.
The function is inactive if the outside temperature
To obtain cool air more quickly, enable interior
is below 5°C to prevent the risk of misting on the
Central and side air vents
air recirculation for a brief period. Then return
windscreen and side windows.
to the intake of exterior air.
Footwells
Clean Air function
Switching off the air conditioning may result in
Using an interior pollution sensor, this function
some discomfort (humidity or misting).
A symbol is activated to display the presence of
detects fine particles (e.g. cigarette smoke,
blown air in the direction indicated.
mould, bacteria).
It is possible to activate all three buttons
The management of the recirculation of interior
Maximum air conditioning
simultaneously, for uniform distribution
air makes it possible to return to a purified
This function automatically adjusts the
throughout the passenger compartment.
passenger compartment in just a few minutes,
temperature setting to the lowest possible, the
thanks to the passage of air through the high-
air distribution towards the central and side air
performance passenger compartment filter.
vents, the air flow to maximum and, if necessary,
activates interior air recirculation.
55
Ease of use and comfort
► Press this button to activate/deactivate
This function is activated automatically
Rear screen demisting/
the function (confirmed by the
when the front screenwash is used or
illumination/extinction of the indicator lamp).
reverse gear is engaged.
defrosting
Once the function is deactivated, the system
This demisting/defrosting only works with the
returns to the previous settings.
engine running.
Front demisting
Depending on version, it also demists/defrosts
Switching off the air
the doors mirrors.
- defrosting
conditioning system
► Press this button to activate/deactivate
This mode allows the windscreen and side
the function (confirmed by the
► Press button 12-OFF.
windows to be demisted or defrosted as quickly
illumination/extinction of the indicator lamp).
Its indicator lamp lights up and all the other
as possible.
The function can be activated whatever the
indicator lamps of the air conditioning system
► Press this button to activate/deactivate
outside temperature may be.
go off.
the mode (confirmed by the illumination/
The period of operation depends on the outside
This action deactivates all of the functions of the
extinction of the indicator lamp).
temperature.
air conditioning system.
The mode automatically manages the air
Demisting/defrosting therefore switches
The temperature is no longer regulated. A slight
conditioning, air flow, air intake and distributes
off automatically to prevent an excessive
flow of air can still be felt, due to the forward
ventilation optimally to the windscreen and side
consumption of electrical current.
movement of the vehicle.
windows.
The air flow can be changed manually without
Heated windscreen
Interior air recirculation
deactivating this mode.
The intake of exterior air prevents the formation
With Stop & Start, when demisting has
of mist on the windscreen and side windows.
been activated, STOP mode is not
Recirculating the interior air isolates the
available.
passenger compartment from outside odours
and fumes and allows the desired passenger
In wintry conditions, before moving off,
compartment temperature to be achieved more
remove all snow or ice on the windscreen
rapidly.
near the camera.
► Press this button to activate/deactivate
Otherwise, the operation of the equipment
the function (confirmed by the
In cold weather, this function heats the entire
using the camera may be affected.
illumination/extinction of the indicator lamp).
windscreen and complements the Automatic
Visibility programme to speed up the evacuation
of elements that interfere with visibility (e.g. dew,
56
Ease of use and comfort
mist, frost, snow), located on either side of the
This function is available when the vehicle is
The programming can also be carried out
3
windscreen.
connected or not connected.
from a smartphone via the MYPEUGEOT
It can be used both before setting off and while
APP application.
driving.
Programming
For more information on the Remotely-
In the Climate touch screen application,
operable functions, refer to the corresponding
Switching on/off
select the Preconditioning tab.
section.
► Press + to add a programme.
The fan noise that occurs during
► Select the time of entry into the vehicle and
temperature pre-conditioning is perfectly
the desired days. Press OK.
normal.
► Press ON to activate this programming.
The pre-conditioning sequence begins
approximately 45 minutes before the
Operating conditions
programmed time when the vehicle is connected
- The function is only activated when the
(20 minutes when it is not connected) and is
ignition is switched off and the vehicle
maintained for 10 minutes after.
locked.
► With the engine running, press this button to
- When the vehicle is not connected, the
activate/deactivate the function (confirmed by an
function is only activated if the battery charge
indicator lamp).
level is greater than 20%.
The period of operation depends on the outside
- When the vehicle is not connected and a
temperature.
recurring programme is active (e.g. from Monday
The function switches off automatically to
to Friday), if two temperature pre-conditioning
prevent excessive power consumption.
sequences are run without the vehicle being
used, the programme will be deactivated.
Temperature
This indicator lamp comes on fixed when
a temperature pre-conditioning cycle is
pre-conditioning
programmed. It flashes when temperature pre-
(Rechargeable hybrid)
conditioning is in progress.
This function allows you to programme the
You can set multiple programmes.
temperature in the passenger compartment to
Each one is saved in the system.
reach a pre-defined, non-modifiable temperature
To optimise the driving range, we recommend
(approx. 21°C) before you enter the vehicle, on
starting a programme while the vehicle is
the days and at the times of your choice.
connected.
57
Ease of use and comfort
Front fittings
Sun visor
Observe the maximum power rating to
avoid damaging the accessory.
► With the ignition on, raise the concealing
flap; depending on the version, the mirror is
illuminated automatically.
The connection of an electrical device
This sun visor is also equipped with a ticket
not approved by PEUGEOT, such as a
holder.
USB charger, may adversely affect the
operation of vehicle electrical systems,
Glove box
causing faults such as poor radio reception or
interference with displays in the screens.
► To open the glove box, lift the handle.
With the ignition on, the glove box is lit when
open.
USB sockets
Depending on version, it contains an adjustable
These symbols determine the type of use of a
ventilation nozzle, distributing the same
USB socket:
conditioned air as the vents in the passenger
Power supply and recharging.
compartment.
Never drive with the glove box open
Likewise, plus exchange of multimedia
when a passenger is at the front. It may
data with the audio system.
1.
Sun visor
cause injury during sharp deceleration!
Likewise, plus use of smartphone
2.
Coin holder (depending on version)
applications with the touch screen.
3.
Illuminated glove box
4.
Door pockets
12 V accessory socket
5.
Storage compartment or Wireless
smartphone charger
6.
Front USB socket/12 V socket
7.
Cup holder
8.
Storage compartment or Smartphone
storage with, depending on version, closable
cable passage in the front armrest
9.
Front armrest with storage (depending on
USB sockets allow the connection of a portable
version)
device.
► Plug in a 12 V accessory (with a maximum
Front USB socket (depending on version)
The USB socket located at the
rated power of 120 W) using a suitable adapter.
10.
Rear USB sockets (depending on version)
front of the centre console also
58
Ease of use and comfort
allows a smartphone to be connected by Android
When the USB socket is used, the
Charging is managed by the smartphone.
3
Auto® or CarPlay®, enabling certain smartphone
portable device charges automatically.
With the Keyless Entry and Start system, the
applications to be used on the touch screen.
While charging, a message is displayed if the
charger’s operation may be briefly disrupted
For best results, use a cable made or approved
power drawn by the portable device exceeds
when a door is opened or the ignition is switched
by the device manufacturer.
the current supplied by the vehicle.
off.
These applications can be managed using the
For more information about how to use this
steering-mounted controls or the audio system
equipment, refer to the sections describing
Charging
controls.
the audio and telematics systems.
► With the charging area clear, place a device
in its centre.
Smartphone storage/USB socket
Wireless smartphone
When the portable device is detected, the
charger
charger’s indicator lamp lights up green. It
remains lit for the whole time that the battery is
being charged.
The system is not designed to charge
multiple devices simultaneously.
Do not leave metal objects (e.g. coins,
keys, vehicle remote control) in the
charging area while a device is being charged
► Open the front armrest to access the cable
This system allows wireless charging of a
- risk of overheating or interrupting the
passage.
portable device such as a smartphone, using the
charging!
► Open the cable passage shutter.
magnetic induction principle, in accordance with
► Put the device to be connected with its USB
the Qi 1.1 standard.
cable in the storage compartment.
The portable device to be charged must be
► Route the cable through the cable passage in
compatible with the Qi standard, either by design
the front armrest.
or by using a compatible holder or shell.
► Connect the cable to the USB socket to
A mat can also be used provided that it is
Checking operation
charge the device.
approved by the Manufacturer.
The state of the indicator lamp allows the
The charging area is identified by the Qi symbol.
operation of the charger to be monitored.
The charger works with the engine running and
with the Stop & Start system in STOP mode.
59
Ease of use and comfort
Front armrest
FOCAL® Hi-Fi system
State of the
Meaning
indicator lamp
It includes a storage space and is illuminated
The vehicle is equipped with a high-fidelity
when the cover is opened (depending on
acoustic system from the French brand FOCAL®.
Off
Engine switched off.
version).
10 speakers incorporating exclusive FOCAL®
No compatible devices
technologies offer the pleasure of pure and
detected.
Opening
detailed sound inside the vehicle:
Charging complete.
- Polyglass technology central speaker: sound
Fixed green
Compatible portable
immersion and spatialisation.
device detected.
- Polyglass technology woofers/mid-range
Charging.
speakers with TMD suspension: balance,
dynamics and precision of sound.
Flashing orange
Foreign object detected in
- Aluminium TNF inverted dome tweeter:
the charging zone.
optimal sound dispersion, detailed treble.
Portable device not well
- 12 channel full active amplification - 690 Watts
centred in the charging
Class D booster technology: significant audio
zone.
► Press the lever beneath the cover.
power available at all times despite low power
Fixed orange
Malfunction of the
The cover opens in two parts.
consumption.
portable device's battery
- Subwoofer with high excursion Power
meter.
Closing
FlowerTM triple coil technology: deep and
Device battery
controlled reproduction of low frequencies.
temperature too high.
Charger malfunction.
If the indicator lamp is fixed orange:
- remove the device, then place it back in the
centre of the charging zone.
or
- remove the device and try again in a quarter
of an hour.
► Fold back the two parts of the cover.
If the problem persists, have the system checked
by a PEUGEOT dealer or a qualified workshop.
60
Ease of use and comfort
Mats
hinder the operation of the cruise control/
Touch version with LED
3
speed limiter.
Fitting
The approved mats have two fasteners
located underneath the seat.
Courtesy lamps
Non touch-sensitive version
1. Front touch-sensitive courtesy lamp
2. Front touch-sensitive reading lamps
When fitting it on the driver's side, only use
the mountings present on the carpet (a "click"
indicates proper locking).
The other mats are simply laid over the carpet.
Reading lamps
Removing/refitting
► With the ignition on, operate the
3. Rear touch-sensitive reading lamps
corresponding switch.
► To remove it on the driver's side, move the
seat backwards and unclip the fasteners.
Take care not to place anything in
Touch-sensitive courtesy
► To refit it, position the mat and secure it by
contact with the courtesy lamps.
pressing down.
lamp
► Check that the mat is secured correctly.
It comes on gradually:
To avoid any risk of jamming the pedals:
- when the vehicle is unlocked.
- Only use mats which are suited to the
- when the ignition is switched off.
fixings already present in the vehicle; these
- when a door is opened.
fixings must be used.
- when the remote control locking button is
- Never fit one mat on top of another.
activated, in order to locate the vehicle.
The use of mats not approved by PEUGEOT
It switches off:
may interfere with access to the pedals and
- when the vehicle is locked.
61
Ease of use and comfort
- when the ignition is switched on.
The armrest incorporates two cup holders.
Rear fittings
- 30 seconds after the last door is closed.
The cup holders have a removable reducer to
The front and rear touch-sensitive reading lamps
be used depending on the diameter of the cans
USB sockets
come on and go off at the same time as the
and cups.
courtesy lamp.
The pen holder can also hold a smartphone.
A long press on the front touch-sensitive
Ski flap (Hatchback)
courtesy lamp completely deactivates it
Device for storing and transporting long objects.
(confirmed by the "OFF" symbol).
The front and rear touch-sensitive reading
Opening
lamps still remain operational.
► With the rear armrest lowered, open the flap
by pulling its handle downwards.
On the SW version, the ski flap is replaced by
Interior ambient lighting
the folding of the central backrest.
For more information on the Rear bench seat,
The interior ambient lighting casts soft, coloured
in particular the central backrest, refer to the
lighting in the passenger compartment, when low
Each USB socket is used to power or recharge a
corresponding section.
lighting conditions are detected.
portable device.
By default, the colour of the interior ambient
The left USB socket also allows multimedia
lighting is linked to that of the screens,
data to be exchanged with the audio system
depending on the driving mode selected.
(depending on country of sale).
Activation/deactivation and adjustment of
the brightness are set via the Settings >
Rear armrest
Brightness touch screen application.
The colour is selected via the Settings >
Customisation touch screen application.
► Load the objects from inside the boot.
62
Ease of use and comfort
Shark fin antenna
5. Rigid boot floor or hinged boot carpet
3. Bag hook
3
(Rechargeable hybrid)
4. 12 V socket
6. Storage well under the carpet
Boot lamp
5. Storage nets
SW
6. Stowing rings
7. Rigid boot floor, 2-position boot floor or
hinged boot carpet (Rechargeable hybrid)
A ventilation grille is present at the rear of the
8. Storage well under the carpet
roof for cooling the shark fin antenna.
Any ventilation noise produced, with the ignition
The stowing rings are designed to secure
on or the engine running, is completely normal.
luggage using different types of retaining
nets or suitable straps.
Boot fittings
For more information, contact a PEUGEOT
dealer or a qualified workshop.
Hatchback
Load space cover (SW)
In the event of sudden deceleration,
objects placed on the load space cover
can turn into projectiles.
Reeling in
1. Load space cover shelf
2. Boot lamp
3. Storage net
4. Stowing rings
► Pull the handle towards you and downwards;
1. Load space cover roller
the load space cover will automatically roll up.
2. Rear seat folding controls
63
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст