Renault Magnum engine. Manual — part 115
3 / 12
Temporarily fit a bolt
(1) complete with spacer (2) to N° 7 bearing.
Fit bolt
(3).
Tighten to a torque of
25 Nm.
Fit half-bearing
(A) (item N° 1).
4 / 12
Fit bolt
(B).
Tighten to a torque of
25 Nm.
Position the crankshaft with N° 1 cylinder at TDC.
Check that the flywheel TDC mark is in line with pointer
(1).
5 / 12
Use tool 1380.
The camshaft top dead centre mark
(TDC) must be positioned between the marks (A) on the camshaft front bearing cap.
6 / 12
Fit pinion
(1) ensuring the position of marks.
Fit vibration damper
(2).
Fit washer
(3).
Fit securing bolts
(4).
Tighten to torque.
See pages .
If necessary.
Immobilize crankshaft.
Use tool 1380.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст