Renault Magnum engine. Manual — part 114
2 / 3
Clean the cylinder head joint faces.
Fit locating dowels.
Use a mallet.
Fit new lower half-shell bearings.
3 / 3
Ensure that half-shell bearings numbers
1 - 7 can rotate around pin.
Ensure that half-shell bearings numbers
2 › 6 can be moved laterally.
Fit the camshaft.
See pages .
1 / 12
Camshaft, fitting
Oil all moving parts.
Fit camshaft lower half-bearings
(1) on the cylinder head.
Marks positioned on exhaust manifold end.
Apply oil (engine oil) to the inner faces of bearing half-shells
(2 - 3) when installing them. Do not apply oil to the support face.
Fit bearing half-shells
(2 - 3).
The half-shell
(3) of N° 7 bearing determine the camshaft end float.
2 / 12
Fit the camshaft
(1).
Use tool 8264.
Use lifting tackle.
Fit half-bearing (item N°
7).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст