Renault Magnum engine. Manual — part 17
16 / 25
The marking
(›) must be directed towards the front of the engine (N° 1 cylinder).
Immobilize liners.
Use tool 1462.
Withdraw tool 2935.
17 / 25
Clean the contact faces thoroughly.
Fit bearing half-shells
(7).
Match the direction of orientation.
Apply oil (engine oil) to the inner faces of bearing half-shells
(7) when installing them. Do not apply oil to the support face.
Fit connecting rod caps
(6).
Ensure the marking.
18 / 25
Fit securing bolts
(5).
Tighten to torque.
See pages .
Use tool 9776.
Check that the crankshaft rotates freely by turning it by hand.
19 / 25
Oil jets
Fit oil jets
(4).
Fit securing bolts
(3).
Tighten to torque.
See pages .
Check that jet
(4) is right in front of the oilway port (A) under piston head (13).
Fit the oil pump.
See pages .
Cylinder block stiffener
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст