Daewoo Nubira. Manual — part 205
INTERIOR TRIM 9G – 21
DAEWOO V–121 BL4
D–PILLAR TRIM PANEL (WAGON)
Removal Procedure
1. Open the tailgate.
2. Remove the D–pillar trim panel.
Installation Procedure
1. Install the D–pillar trim panel.
2. Close the tailgate.
LUGGAGE COMPARTMENT
WHEELHOUSE TRIM PANEL
(NOTCHBACK)
Tools Required
KM–475–B Trim Remover
Removal Procedure
1. Remove the rear seatback. Refer to Section 9H,
Seats.
2. Remove the luggage compartment rear quarter trim
panel.
3. Using the trim remover KM–475–B, remove the
plastic retaining clips and the wheelhouse trim pan-
el.
9G – 22
I
INTERIOR TRIM
DAEWOO V–121 BL4
Installation Procedure
1. Install the wheelhouse trim panel with the plastic
retaining clips.
2. Install the luggage compartment rear quarter trim
panel.
3. Install the rear seatback. Refer to Section 9H,
Seats.
LUGGAGE COMPARTMENT
WHEELHOUSE TRIM PANEL
(WAGON)
Removal Procedure
1. Remove the C–pillar trim panel. Refer to”C–Pillar
Trim Panel” in this section.
2. Remove the D–pillar trim panel. Refer to”D–Pillar
Trim Panel” in this section.
3. Remove the screws, the clips, and the luggage
compartment wheelhouse trim panel.
4. Disconnect the electrical connector.
Installation Procedure
1. Connect the electrical connector.
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
2. Install the wheelhouse trim panel with the screws
and the clips.
Tighten
Tighten the trim panel screws to 2 N
S
m (18 lb–in).
3. Install the D–pillar trim panel. Refer to”D–Pillar Trim
Panel” in this section.
4. Install the C–pillar trim panel. Refer to”C–Pillar Trim
Panel” in this section.
INTERIOR TRIM 9G – 23
DAEWOO V–121 BL4
LUGGAGE COMPARTMENT REAR
QUARTER TRIM PANEL
(Notchback Shown, Hatchback
Similar)
Tools Required
KM–475–B Trim Remover
Removal Procedure
1. Using the trim remover KM–475–B, remove the
plastic retaining clips and the rear quarter trim pan-
el.
Installation Procedure
1. Install the rear quarter trim panel with the plastic
retaining clips.
LUGGAGE COMPARTMENT REAR
TRIM PANEL
Tools Required
KM–475–B Trim Remover
Removal Procedure
1. Using the trim remover KM–475–B, remove the
plastic retaining clips and the luggage compartment
rear trim panel.
9G – 24
I
INTERIOR TRIM
DAEWOO V–121 BL4
Installation Procedure
1. Install the luggage compartment rear trim panel
with the plastic retaining clips.
DRIVER KNEE BOLSTER
Removal Procedure
1. Remove the plastic knee bolster trim panel.
2. Remove the bolts and the left side instrument panel
trim.
3. Remove the nut, the bolts, and the driver knee bol-
ster.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст