Daewoo Nubira. Manual — part 206
INTERIOR TRIM 9G – 25
DAEWOO V–121 BL4
Installation Procedure
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
1. Install the driver knee bolster with the nut and the
bolts.
Tighten
Tighten the knee bolster nut to 22 N
S
m (16 lb–ft).
Tighten
Tighten the knee bolster bolts to 22 N
S
m (16 lb–ft).
2. Install the left side instrument panel trim with the
bolts.
3. Install the plastic knee bolster trim panel.
PASSENGER KNEE BOLSTER
Removal Procedure
1. Remove the plastic knee bolster trim panel under
the steering column.
2. Remove the bolts and the floor console forward trim
panels.
9G – 26
I
INTERIOR TRIM
DAEWOO V–121 BL4
3. Remove the right side kick panel. Refer to”Kick
Panel” in this section.
4. Remove the glove box. Refer toSection 9E, Instru-
mentation/Driver Information.
5. Remove the screws and the glove box housing.
6. Remove the bolts and the right–side instrument
panel trim.
7. Remove the audio system. Refer toSection 9F, Au-
dio Systems.
8. Remove the bolts and the instrument panel lower
trim piece.
9. Remove the passenger footwell upper cover. Refer
to”Footwell Upper Cover” in this section.
10. Pull out the retaining clips and remove the passen-
ger knee bolster foam pad.
INTERIOR TRIM 9G – 27
DAEWOO V–121 BL4
11. Remove the bolts and the passenger knee bolster.
Installation Procedure
Notice : Dissimilar metals in direct contact with each other
may corrode rapidly. Make sure to use the correct fasten-
ers to prevent premature corrosion.
1. Install the passenger knee bolster with the bolts.
Tighten
Tighten the knee bolster bolts to 22 N
S
m (16 lb–ft).
2. Install the passenger knee bolster foam pad with
the retaining clips.
9G – 28
I
INTERIOR TRIM
DAEWOO V–121 BL4
3. Install the passenger footwell upper cover. Refer
to”Footwell Upper Cover” in this section.
4. Install the instrument panel lower trim piece with
the bolts.
Tighten
Tighten the instrument panel lower trim piece bolts to
10 N
S
m (89 lb–in).
5. Install the audio system. Refer toSection 9F, Audio
Systems.
6. Install the right–side instrument panel trim with the
bolts.
7. Install the glove box housing with the screws.
Tighten
Tighten the glove box housing screws to 4 N
S
m (35
lb–in).
8. Install the glove box. Refer toSection 9E, Instru-
mentation/Driver Information.
9. Install the right–side kick panel. Refer to”Kick Pan-
el” in this section.
10. Install the floor console forward trim panels with the
bolts.
Tighten
Tighten the floor console forward trim panel bolts to
4 N
S
m (35 lb–in).
11. Install the plastic knee bolster trim panel under the
steering column.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст